Facts About andobil Car Phone Holder Mount [2022 Upgraded] Smartphone Air Vent Holder Easy Clamp Hands-Free Compatible with iPhone 13 12 11 Pro Max 8 Plus X XR XS SE Samsung Galaxy S22/S21/S20+/S10/S9/Note 20/10
I have the iPhone 11 and it works well. So, yes.
I have a samsung galaxy S8+ and it holds it fine. Not sure about the 11 pro max.
This is a quality product. It feels substantial – holds my iPhone XR securely.
I have a pixel 4. It’s perfect for my phone. It measures about 3×6 with the case on.
Yes it should. The iPhone 12 pro is listed at 6.7 inches and this mount is listed as supporting phones up 7 inches so it should fit fine. The clamp arm of the stand is adjustable, and there are two small feet at the bottom of the mount to keep your phone from sliding through as well.
I checked the dimensions of the Samsung a10e. It appears to be less than 4.25 inches wide which means it would fit. Sometimes measurements within the specs can be inaccurate so I’d measure the phone first to be sure.
Yes i’m using 11 pro max
I don’t think so.
Yeah it probably should
I can’t say for sure about the 10R but it firmly holds my Iphone 11 in a protector. Hope that helps …
I don’t know for your car, but the attachment is pretty standard, that clamp-looking one you tighten into place.
I will say that style doesn’t hold well in my car, as the weight makes it slide off. I emailed the seller and they sent me a hook-style part instead that has since worked great.
The supplier was proactive about sending me replacements as soon as I bought my phone mount. I would just contact them to request a replacement.
Yes, this air vent car phone mount fit note 10 plus.
I have a Samsung S20 fe with a Spigen case. There is about 1 inch to spare on both sides before closing the holder. I really don’t know about you case.
I’m not familiar with the note 10 plus. I have an iphone 10s and it works perfectly with that phone. I really can’t believe it wouldn’t fit your phone, because it’s so adjustable. The "foot" or length of it is adjustable, and the sides are also adjustable also. I really love it! It screws into the vent very tightl… I’m not familiar with the note 10 plus. I have an iphone 10s and it works perfectly with that phone. I really can’t believe it wouldn’t fit your phone, because it’s so adjustable. The "foot" or length of it is adjustable, and the sides are also adjustable also. I really love it! It screws into the vent very tightly, and can be adjusted left and right to best view while driving. I think it’s just perfect! (Oh, and their customer service is outstanding too…they responded immediately with a question I had, and have reached out to me another time to be sure I was happy w the product. I can’t believe they wouldn’t make you happy if it doesn’t work w your phone)
Info About andobil Car Phone Holder Mount [2022 Upgraded] Smartphone Air Vent Holder Easy Clamp Hands-Free Compatible with iPhone 13 12 11 Pro Max 8 Plus X XR XS SE Samsung Galaxy S22/S21/S20+/S10/S9/Note 20/10 (Reviews From Amazon)
The media could not be loaded. Unlike previous holders for phones in the car the Andobil really is convenient when it comes to inserting the phone into the holder, and then removing it when you reach your destination. On many phone holders you needed two hands to spread the side clips and insert/remove the phone, then came the “single touch” cradle where you could install/remove the phone with one hand; however you needed power to the clip to do so. Now place the phone in the holder, squeeze the side clips to insert the phone and one press and the side clips open up to remove the phone. True one hand operation and no power required. In addition I have the “power cord” available to charge my mobile devices rather than power my phone clip. Now I need another one for my wife’s car.
So far so good!!! Great buy!!
It stays put if you clip it to the vent tight!! .. but the entire mount fell right off the vent one time. but I realized this will happen because you are clamping a hard piece of material to another hard piece of material (the clamp & vent) and I have no idea why the manufacturer didn’t put the silicone pads in the Vent clamp like they put in the Arm clamps…. ??
so it fell off because it’s just slippery and need that silicone grip as well. So I cut a small piece of that cabinet liner and put it in between the clamp and vent , now it stays put!!, but anyway
Everything else works good! The clamp arms grip the phone snug and tight. The quick release button releases the phone easily. Overall it’s great ! I’m glad I don’t have to look down at my phone and take my eyes off the road to see my GPS for directions. Note: don’t forget to grab your ph out the mount when you get out the car, I allllllways leave mine.
I like the way this holds my phone in front of the A/C vent so it stays cool. I use it on the left side vent near the driver door, as the steering wheel blocks the view from the other vent. If you absolutely can’t use it left-handed, you should look for another mounting device that doesn’t use the vent (actually, I tried it on the inside vent for the front passenger and it would work that way). The grip is plenty strong to hold the phone, and the ball mount allows me to orient the phone so I can see it. I can easily plug in my Samsung Galaxy S8 to keep it charged.
I found this to be a very good price for the product. It is very well made and not at all cheap. I had a previous suction mounted mount and it would constantly come apart from the heat. I followed another reviewers suggestion and sprayed it all over with WD40 and wiped off the excess and loosened everything before installing it. I attached it to my air vent on the left of my steering wheel as I prefer it there. It was a bit awkward screwing in down and I managed. It has remained very sturdy and I have an iPhone 10 plus. I have checked it from time to time and it has not loosened at all. I also have no plans of taking it off. It will permanently remain there. I would highly recommend this product. I drive a Subaru Forester and it fits just fine.
This actually works! My heart sank when I opened the box and saw that this was one of those things that go into the car vents. The picture wasn’t very clear and I thought I was ordering one that went into the CD player. I already tried a couple that went into the vent and they were a total waste of money. So it was with trepidation that I tried this in the car. And I was greatly surprised at how easy this was to install and that this actually held my phone securely AND that this did not wobble or anything at all! It held tightly to the vent and did not move one iota throughout any kind of road condition! This is definitely a great purchase!
The media could not be loaded. I have bought several different brands of vent phone mounts and this one is by far my favorite! It tightens enough to stay in place and still be able to adjust if needed. Holds all sizes of phones. Tightens and releases easily. I’m able to charge while my phone is in the mount. I would definitely buy again and I would definitely recommend to anyone looking for a dash/vent phone holder. I bought both the vent only mount and the one with all the different types of dash mounts. I prefer the vent mount. I haven’t tried the dash mounts.
My husband travels 90% + of the time for his job. He needed a hands free device so that he could use his phone as a gps, and talk to people without being distracted while he was driving. We reviewed several and decided on this. It fits in the vent great! It’s easy to use. There’s a hole at the bottom that the charger can be used while it’s sitting on the vent. There’s an easy release button on the side to open it, and the sides conform nicely to his iphone. I’d recommend this to anyone. This is a great product!
UPDATE: gave a 3-star review due to a problem with centering. Less than two hours after contacting andobil, I got a reply and they arranged a replacement (thanks Diana!) I always appreciate a company that stands by its product.
This is better than any I’ve owned, very solid and easy to mount. Does not seem like it will fall off. However, I have to give only three stars because it is not centered as you can see in my photo. That means when fully closed, the cable entry point partially covers the cable port, so I have to leave it a little less tight than it should be. It’s possible that this is a defect, so maybe they’ll see this review and reply.
Spray a little bit of WD-40 on the internal gear teeth, hold down the button, flex the locking arms a few times and you’ll be fine.
The product is great at first, it holds functionally and securely. I had a fear going in when I first bought this product thinking that the internal gears inside would eventually seize and break. My phone gets hot when I charge it so I specifically opted to get an air vent charger so my phone would stay cool.
However my fears were realized when the button became difficult to push and the spring became slow to release the lock.
However this was remedied with a little bit of WD-40 and it works perfectly now. It’s a decent product once you add a little redneck elbow grease.
Unfortunately this will be unknown by many consumers that will experience their product seizing, locking up, eventually break their device trying to jam down the locked up button and think of it as a bad product.
This is the third phone holder I’ve purchased for my car. This one seems like it’s going to have to be the one I go with since it’s the only one that has worked for me. The suction ones suck (and not in the good way) and the ones specifically for Pop Socket users make the glue melt when it’s hot out or the heat is on in the car. I live in the desert so I was constantly dealing with my phone falling because the adhesive melted.
This holder is easy to attach to any vent in your car or, I suppose, anything that the clip can be attached to. I keep mine clipped to a vent. The clip has a screw attached to tighten it and there’s padding on the surfaces that touch the vent so you can tighten it enough so that it doesn’t come off easily. You also don’t have to force it onto your vent like the first brand I tried (Pop Socket brand). This holder comes with an additional clamp for your vent so you can have two places to use your holder.
The part that holds your device adjusts to accommodate longer phones and the width adjusts as well. There are pads on the part that grip your phone so, again, there’s that cushion that allows you to get your phone in there securely with no wiggle room. The quick-release button on the side makes it easy to remove your phone, too, and there’s room to accommodate your phone while it is plugged in.
Now, my only inconvenience with this device is that I have a Pop Socket on my phone. I find it best to remove my entire phone case to use this phone holder. It’s *possible* to get your phone in there with a Pop Socket on the back, but I have some hand dexterity issues that make it difficult. It’s possible, but it’s not like using the holder without the Pop Socket. This is something I don’t think I’ll be able to remedy with another holder that I like as much so I will continue to take my phone out of its case before using the holder. It’s faster to do that than for me to fiddle around with the holder and the Pop Socket.
|andobil Car Phone Holder Mount [2022 Upgraded] Smartphone Air Vent Holder Easy Clamp Hands-Free Compatible with iPhone 13 12 11 Pro Max 8 Plus X XR XS SE Samsung Galaxy S22/S21/S20+/S10/S9/Note 20/10||4.3||View On Amazon|