Carwiner Matte Screen Protector Compatible with Tesla Model 3 Model Y 15" Center Control Touch Screen Car Navigation Tempered Glass Accessories 9H Anti-Glare Anti-Fingerprint

You will see rainbows all over the screen. I bought this one because of the previous response to this question. Yes is will work with polarized glasses, but you will see rainbows all over the screen.

It should fit. I do not believe that Tesla has changed the dimensions of the display.

We had that happen right after install. We did a power off comand in settings and that fixed the issue.

Yes.. there are 2 versions.. the normal glossy and the matt finish.. the glossy is if you want to preserve the picture quality of the screen, and the matt is for the anti-glare which cancels out a lot of the reflections on the screen. It however makes the screen a bit less sharp. I have the matt screen and prefer it to… Yes.. there are 2 versions.. the normal glossy and the matt finish.. the glossy is if you want to preserve the picture quality of the screen, and the matt is for the anti-glare which cancels out a lot of the reflections on the screen. It however makes the screen a bit less sharp. I have the matt screen and prefer it to the other as the screen is sans the reflections and much easier to see. But that’s my opinion.

None are anti-fingerprints.. though you’ll see them alot less on the matt onen

Clean with a micro-fiber cloth…no spray solutions needed. In fact you don’t need to get it wet in any manner.

Ofcourse.. all you have to do is rip out the screen from a Tesla Model 3 or Y, and shove it into the dashboard of your 2015 GMC Terrain.. and wupti..

BTW, were you standing with a sieve when God was handing out common sense.. just curious.. 😄

Yes, it is suitable for 2021 Model 3.

Just on side attached to screen?

Yes.

It is made of tempered glass with 9H hardness.

YES and it didn’t work for me. Had to send it back and bought another make of screen protector. Stay away from this one.

I believe it does. Fit my 2021 model Y perfectly and model 3 has same size screen. Very happy with this product.

No, it does not. However, they do provide some tapes to attached to the back of screen and top of glass/front to put in place to be able to align. it can get a bit tricky as mine did not stick and came off. i had a helping hand to hold on and then it was easy to apply.

Matte finish is anti glare . Regardless if it says it or not.

Sticky tabs – that don’t stick very well. Avoid.

I returned that elon accessories brand that was 70 dollars because it would not work with polarized sunglasses. This more affordable matte screen protector will work with polarized sunglasses. No rainbow effect what so ever. It fits the screen perfectly, Can hardly tell its on the screen. Take your time installing it, be sure to remove all dust and fingers prints or it will not look good!! I could not be happier with this. A Must Buy!

2021 Tesla Model 3

This is the 2nd time I bought this. A purse buckle hit the passenger side of my screen and cracked my protector. See last picture. When I noticed it I ran my finger along the edge of the screen and could feel roughness and it looked jagged. I very slightly pulled away and the screen protector cracked in a half moon shape See bottom left corner. I ordered a new one. When I removed the old one it cracked as shown in the rest of picture. The actual screen was fine. No damage at all and it was super clean just like the day I received my car.. Install was simple but I didn’t rush it. I used the stickers often to remove dust. It took 5 minutes to fully install. It looks perfect again. I will continue buying these in the future. Totally worth the money. Thank you for such a great product! It looks beautiful again!

I was inclined to give this product less than five stars but their customer service and responsiveness has been excellent.

The first issue I had was the packaging. Nowhere on the package does the product say it’s “anti-glare” – the precise reason that I purchased this screen protector. It does say anti-fingerprint as well as HD definition. Before removing my current clear glass protector and installing the CarWiner protector I contacted the vendor. I thought perhaps they sell both a clear (Hi definition) protector and an Anti-Glare protector. I got a response back the following day that the product was indeed anti-glare. In the scheme of things – no big deal.

The second issue had to do with the installation. I followed the instructions exactly as indicated on the back of the package. Step 4 clearly says position the protector with the “red tag” in the upper left corner which I did. After removing all the dust, attaching the screen and clearing the bubbles I ran my finger around the edges. The corners were perfectly aligned but there was a small bulge at the top and a corresponding gap at the bottom. Not major – but noticeable. I realized that the Tesla screen is not perfectly symmetrical top to bottom. The screen had been placed on upside down. I again contacted the vendor who immediately offered a replacement and advised to check the fitment before removing the protective back cover. Apparently on some of the screens the red tag is misplaced.

Despite the additional effort to replace the screen protector I feel the product is excellent and the customer service is excellent.

On a second one already. The first one chipped at the right bottom corner when I accidentally hit it with my phone grabbing something.

Installs easily and is great at reducing glare.

When you install it, put the frame on, peel a little bit of the backing off from the top of the protector and push up against the top of the frame and let it rest down while peeling the backing off.

The first one I installed from the bottom and there’s a slight gap doing it that way like some of the other reviews with photos showing the gap.

I really like the anti-glare, matte finish of the product. I think the product is a pretty good bargain, too; however, I admit, I struggled a bit with the installation.

Instructions were included in English and I read through them completely several times before my first attempt. The most difficult section for me was after attaching the tape pieces on top of the screen to hold the screen protector, then peeling the backing and swiftly picking up any dust/lint/unwanted particles on the screen the applying the screen protector. The first time, before I peeled the backing, the screen protector fell off the four stickers that were holding them as a template. The second try, I actually got the backing off and pressed the middle to release the adhesive, but the results were not good. I had bubbles that I could not press out and worse, had debris on the screen that my eyes focused on as an imperfection. I eventually got the protective glass on my fourth try. I don’t think it’s perfectly aligned but it’s pretty close and there are no bubbles or trapped debris sandwiched in between. That would’ve driven me nuts! And, it performs its basic function of the protecting the screen from me!

Take your time and clean, then clean then clean once more. Then carefully tape the protector along the top edge, and slowly peel backing. If you clean and align it will fit absolutely perfectly and is not easily seen. The difference in glare and smudges is instantly apparent. Doesn’t dim screen.

Note you will likely need to reset the screen by holding both steering wheel buttons down for several seconds, the car will reboot its computer and recalibrate the screen sensitivity automatically. Has held up quite well all summer in Texas heat

I ordered this even before i got my car, so i could install it right at my possession. The thing is that it leave behind a little curve at the bottom and is not 100% match/fit, though it is more than 99% fit. And the less than 0.5% curve at the bottom is non-noticeable.
Secondly, i wish the temporary tapes to hold on top, when applying the first time to arrange the position, were little more stronger. it kept coming off when i was trying to adjust the position. but finally was able to figure out. Again, these tapes are 10 sec one time use so no big deal when applying only.

This is a must-have for your Model 3 or Y. Really easy to install with the included template, looks great and minimizes glare and fingerprints. BE SURE TO NOT INSTALL IT UPSIDE DOWN LIKE I DID! Actually not a big deal but the screen has a very slight curve on one side so this thing definitely has an “Up” and “Down”. Even if you mess it up like I did, it still looks great but the anal retentive neurotic in me will always notice the very slight gap on one side. Grr. So maybe that should be clearer in the instructions but it was totally an ID10T error on my part.

Just like any phone, protect the glass. This is a lot cheaper to replace than a new screen. Even if never breaks, I always install these glass screens to iPads, phones and my car screens. I have kids, they aren’t gentle with anything and I don’t want to stress over my car screen breaking. My last car had one and it never broke and sold car with it on, wasn’t even scratched.

Never have I ever put screen protectors on devices but this one is worth it. Very invisible and ads just enough matte to keep glare down. Fits great. Great instructions. No fancy installer that you pay more for (don’t need that other brand).

They warn you and be warned, the screen is not rectangle. There is a top and bottom so watch that on install.

I will buy this brand before my next Tesla’s are ever delivered and put this on day one.