DesertWest Cell Phone Holder for Car Dashboard Car Mount [4.0 Version & Ultra Stable] Windshield Air Vent Universal Compatible with iPhone 13 12 Pro Max 11 X Max XR 8 7, Samsung Galaxy S21 All Phones

Video could not be loaded

For this specific question, please check below:
1) Is the dashboard cleaned up?
2) Did you press the 2-step lock? … For this specific question, please check below:
1) Is the dashboard cleaned up?
2) Did you press the 2-step lock?
3) Please try the 3M adhesive pad.

Meanwhile, here are some warm tips for you!
* Dash mount is Not recommended for soft/ curved/ leather/ wood/ plush fabrics/ filmed glass surfaces. In such case, please install on windshield or air vent.
* The dash pad is for One-Time use. Once installed, it’s too sticky to remove. Please think twice about the location.
* Before mounting the suction cup, please let the dash pad sit for 24hrs.
* The suction cup (silica gel) is washable to re-use. Please let it dry naturally after washing.
* After removing the phone holder, please use plastic wrap to protect the Suction cup.

If everything’s checked and still not ok, please contact us for replacement. Thank you!

If you still have any problem about this item, you could contact us through the below link for replacement.

https://www.amazon.com/hz/help/contact/?marketplaceID=ATVPDKIKX0DER&sellerID=A286GCIGWRNY5U&_encoding=UTF8&ref_=v_sp_contact_seller&

Video could not be loaded

The total thickness this holder can hold is about 14mm. The car phone mount will grips securely onto your S5 galaxy phone plus with a thin case.
Meanwhile, DesertWest product comes with life-time warranty. If for any reason feel unsatisfied with our product, please contact us for a 100% satisfactory solution without … The total thickness this holder can hold is about 14mm. The car phone mount will grips securely onto your S5 galaxy phone plus with a thin case.
Meanwhile, DesertWest product comes with life-time warranty. If for any reason feel unsatisfied with our product, please contact us for a 100% satisfactory solution without a return.
Wish you have a pleasant shopping experience in DesertWest!

You didnt say what Iphone you have, but Ive got a big Note 9 with an OB Defender case on it and it fits easily and tight. For reference, my phone and case are about 3 1/2" wide and 1/2" deep.

The new car phone mount compatible with most phones between 4" and 7"(Width from 1.97"-3.62"), such as iPhone 12 Mini / iPhone 12 Pro Max / iPhone 12 Pro / iPhone 12 / iPhone SE / iPhone 11 Pro Max / iPhone 11 Pro / iPhone 11 / Xs Max / XR / X / 8 / 8 Plus / 6 / 6S / 7 / 7 Plus, Samsung Galaxy Note 20 / S20 / 10 / S10 … The new car phone mount compatible with most phones between 4" and 7"(Width from 1.97"-3.62"), such as iPhone 12 Mini / iPhone 12 Pro Max / iPhone 12 Pro / iPhone 12 / iPhone SE / iPhone 11 Pro Max / iPhone 11 Pro / iPhone 11 / Xs Max / XR / X / 8 / 8 Plus / 6 / 6S / 7 / 7 Plus, Samsung Galaxy Note 20 / S20 / 10 / S10 / S10 Plus / S10e / S9 / S9 Plus / S8 / S8 Plus / S7 / Note 9 and more.

I’m not sure, however my slightly curved dashboard with textured surface did not require the gel pad. I have a Note 8 and it has never slipped or lost the phone. There are very bumpy roads where I drive. I think a mirror should be OK.

Dear Customer,
This car phone holder is made of solid PC material, you don’t have to worry about it may fall off during the rough road or highway under high speed. Our team is focus on car accessories for over a decade, please trust our profession.

Yes, this car phone mount can works with Moto G7. It fits most phones from 4” to 7” and Moto G7 is 6.2".
Any problems about the product, please click "DesertWest" above the ”add to cart” button then click "Ask a question" to get all issues resolved immediately. We offer a 30-day money-back guarantee for ANY reason i… Yes, this car phone mount can works with Moto G7. It fits most phones from 4” to 7” and Moto G7 is 6.2".
Any problems about the product, please click "DesertWest" above the ”add to cart” button then click "Ask a question" to get all issues resolved immediately. We offer a 30-day money-back guarantee for ANY reason if this car air vent phone mount is not fit your phones or cars.
Wish you have a pleasant shopping experience in DesertWest!

It does not stick on the mount. I cleaned the dashboard surface with alcohol wipes and waited 24 hours before placing it and it was no good.

Absolutely

Yes, this has like a sticky suction cup for flat surfaces

Yes, this car phone mount can hold iPhone 7. The car phone mount fits most phones from 4” to 7” and iPhone 7 is 4.7". The universal car phone mount is compatible with iPhone SE / 11 / 11 Pro / 11 Pro Max / XS / XR / XS Max / X / 8 / 8 Plus / 7 / 7 Plus / SE / 6s / 6 Plus / 6 / 5s / 5 / 4s / 4, Samsung Galaxy S20 / S20… Yes, this car phone mount can hold iPhone 7. The car phone mount fits most phones from 4” to 7” and iPhone 7 is 4.7". The universal car phone mount is compatible with iPhone SE / 11 / 11 Pro / 11 Pro Max / XS / XR / XS Max / X / 8 / 8 Plus / 7 / 7 Plus / SE / 6s / 6 Plus / 6 / 5s / 5 / 4s / 4, Samsung Galaxy S20 / S20+ / S20 Ultra 5G / Note10 / Note10+ / S10 / S10+ / S10e / S9 / S9+ / S8 / S8+ / Note8 / S7 / S7 Edge / S6 / S6 Edge, Sony, LG, Google, Sony, Nokia and all cellphones, GPS device.

Yes, the 2020 enhanced vent clip is more than 10 times sturdier than ordinary ones. You can screw the nut to fix the clamp freely, the tighter you screw, the sturdier it will be! Its two small arms are just enough to press against the upper and lower vent blades to lighten the load on the middle one, no damage your car.

Sure, you can set it for landscape.

I wanted to wait a few days before posting a review to see how well this held up in the ridiculously hot Florida sun! I’ve had ones in the past that can’t handle the heat and end up falling off the windshield or dashboard because they lose their grip. This cell phone holder is SOLID! It has a really, really good grip and hasn’t budged at all! Super easy to put together even the attachments! Fits my iphone xr perfectly and allows me to charge it while its in the holder! I love how it can extend up or down as well as forward and back making it super customizable to your liking! Love it so much I’m Purchasing one for my husband!

I have owned a lot of car phone holders & this one is one of if not the best I’ve owned. Its light weight but feels solid. It has great adjustments, I can adjust my phone in a lot of different angles. It holds my phone very secure, I’m never worried about my phone falling off the holder. The windshield mount & vent mount both hold great! I haven’t used the dash mount but I’m sure it will work great too. Its a very good design, built with great quality, and an excellent price. I would recommend this for anyone

My plan was to use this device on the A/C grilles. But I have tried several other models and they fall or do not hold my iPhone X well. That’s why I changed my mind and thought about trying this holder by sticking it on the car dashboard. My surprise was that it is also a holder with great clamps to hold the A/C vents of the car that has a design to support and not to fall. In other words, it has both options. Attaching to the AC vents is great!. It is quickly retractable (you don’t have to wait seconds for it to open and then take out the phone). And moreover, it is very stable and has a kind of “little wrench/knob” to adjust the clamps that hold the air conditioning grille, that is, it does not slip. My iPhone has a protective case and even that fits very well. Also the iPhone 7.
I’ll keep it! and I’m almost sure I can try the other option by sticking on the dashboard and it will be that good because the quality of the product proves it so far!

I feel like the product is well made. I have used it for over a month and overall, I was satisfied. I had used the 3M adhesive to mount it to my dash after reading all the instructions. After a few weeks, it started to lose its adhesion. I was okay with this, because I thought I’d just remove the suction cup from the adhesive disc and use the suction cup to mount it to my windshield. When I tried to remove the suction cup, I found it had melted into the adhesive disc. I can’t really use the suction cup even if I do manage to pry it off of the disc.
>>>>
UPDATE
After this review, Desert West reached out to me in order to get more info. The representative, Rita, was very helpful and thorough. She also made sure to relay the information to the Desert West engineering team. She was kind enough to send me a replacement mount, listed here. https://www.amazon.com/DesertWest-Wireless-Automatic-Dashboard-Compatible/dp/B07H3QCWMR

I’ve used the new mount for a few days and feel very satisfied with it. I was impressed by the feature where the clamps automatically close when the pressure from the phone is detected. It also charges at 7.5w for iPhone models with Qi charging with, which is impressive. Thanks again Rita for all your help!

The media could not be loaded.  Watch my video reviews in HD on my Youtube channel: skyforce95

Pros:
-two mounting options (vent, windshield/dashboard)
-plenty of pivotal points for viewing customizability
-no electronics
-rubber padded on places where it will touch the phone
-good suction power
-opening at the bottom to allow charging of phone
-usable in horizontal or vertical orientations
-like the sleek carbon fiber design
-reasonable price

Cons:
-suction cup will leave a residue over time, however it is generally pretty easy to remove using an alcohol pad, but if you have a luxury car, you might want to reconsider using it on your dashboard

I love the versatility of this holder. It suctions easily to the dash or you can use the vent clip. Also love that the arm extends. Great phone holder!

This is hands down the best phone holder Ive ever bought. Its great that an accessory company finally has figured out the giant phones (Notes, LG V’s, Iphone+) all weigh a lot more than other phones. They also cost upwards of $900-1000 and people that spend that kind of cash usually put on big armor case like a Otter Box Defender or similar- which makes a very wide phone even wider. This holder actually can open up a bit more than 3 1/2″ wide (for those of us in the USA that dont own a metric tape measure) I have a Note 9 with said OtterBox and can easily put it in the holder and shut it easily. It has a substantial feel to it as well, it doesnt feel or sound cheap when using it. Ive gone thru alot of generic holders on Amazon, I usually buy the cheapest one that I think will fit my phone, most dont. Every cheapo holder Ive had has a super sticky suction cup that holds onto the glass like a barnacle. The problem I have is that the spring that holds the suction cup to the arm of the holder gets weak or sloppy and causes the holder to start bouncing or the arm starts sagging down and no amount of lever adjustment or screw tightening can fix it. This holder has not even started to do that after months of daily use- I drive alot, every day. Very happy with this product.

I was excited after receiving the car mount and seeing the many ways possible to mount it in my car. I could use the suction cup and put it on my dash or windshield, or I could use the adhesive pad for a permanent place on my dash that wasn’t completely flat.

It also comes with a telescopic arm, extending it just a little over 4 inches so you can easily see it while driving no matter where you place it. Then there was a third choice, I could mount it on my air vent. While it doesn’t get really hot where I live, I was still worried about the suction cup and adhesive staying put, so I opted to place it on my air vent. This was easy to do with the special clip that was provided. You can then adjust the angle of your phone to where you can see it.

I’m happy with the actual phone holder. My husband and I both use the same car and we have different sized phones. With just the push of a quick release button, you can easily adjust the holder to snuggly fit all sized cellphones between 4-6.5 inches. My husband has a large phone, and all he has to do pull down the adjustable legs to make it fit. It comes with silicone pads on the sides to grip your phone and it is so easy to assemble.

This is NOT a cheap piece of plastic. It’s well made, durable and precise. Well worth it. No more shuffling around the car to find the phone. It’s always easy accessible and safely viewable.

I have to admit–I have never before been a fan of smart phone vent holders. However, this one may convert me. This holder comes with a suction cup holder for the windshield, and a vent holder. I primarily got it for the windshield holder. Suction cups are not my favorite holder; I much prefer more permanent holders with strong adhesives and/or strong magnets. However, I have found windshield suction cup mounting to be acceptable when more permanent mounting is not possible due to lack of appropriate surfaces in the car’s cockpit. (I give you this not to bore you with my preferences, but instead because I believe that confessing my pre-evaluation biases will help give you a better context for the evaluation I share about the product.)

The suction cup holder is the most substantial I have ever used. It holds securely, without having much wobble or “drift,” like the holders I have used that utilize a “gooseneck” style. I have confidence in the cradle and the holder that connects it to the suction cup, will hold it with little vibration or tilting. Its narrowest point is a ball socket with a screw tensioner that holds it securely. (Since the source of most instability is the narrowest point of the holder–and why gooseneck holders are so unstable–the narrow part is very long.) This stability will make it much LESS likely to become a distraction during driving than the other, less stable styles of connecting the holder to the windshield suction cups.

The vent holder was the real surprise, though. I have been heavily against those since trying a few when I first went to a smart phone. I would never have bought one on purpose. I only looked at it because it came with the windshield mount for which I bought the package. However, one look and I was immediately interested. It has a screw-clamp arrangement that securely grips the fins of the vent. I had never seen that before. (That may be old news, I don’t know. I had written off vent holders long, long ago.) Then, it also has a projection perpendicular to the axis of the main holder, that stabilized the angle of the vent clamp in the vent, so even if your car’s vent fins are too loose, it will still sit with stability. I was impressed by this. The ball socket that holds the cradle to the vent-gripper is the same stable screw tensioner used in the windshield mount. For the first time since I first evaluated one of them–I am actually trying out the vent holder FIRST!

My only question is to durability. How well will the plastic hold up to cracking? Will wear-and-tear cause the screw tensioner or the vent clamp to become less secure in time? If it fails, I will update this review. Without such an update, you may assume it is still working well for me.

I have been through many cell phone holders in my life. I currently have an iPhone 8. I must say, this holder is by far the best cell phone holder I’ve ever had. As a parent, and driver for rideshare, it is so important to me that my phone stays put. This thing is so sturdy, I have no worries about my phone falling when using it.

My favorite things about this holder are:
-The grip is amazing! My phone is so secure in the adjustable holder (even with my Otterbox Defender case on).
-The suction is very strong, but still removable. Plus, there was no residue when I removed it.
-The arm extends, which is very helpful if I need a closer look at my screen.
-There is an option to use the magnet, and clip onto the vent. (I didn’t use it while driving yet, but I tested the magnet, and it seems strong).

I honestly have no complaints about this cell phone holder. I already had a holder that clipped onto the vent. It’s going in the trash. The versatility of this holder is unlike any that I’ve ever had in the past. I’m so glad I got this one. I highly suggest it to anyone in need of a cell phone holder.