Everstone Full Motion TV Wall Mount with Height Adjustment for Most 28-70 inch LED, LCD, OLED Flat&Curved TVs, up to 121lbs, Max VESA 400x400mm, 16" Wood Stud

Yes, It come with neccesary bolts. The Accessories: 1 manual instruction, 3 zip ties, 1 spirit level, 6ft HDMI cable. Installation Hardware Includes: Lag Bolts M6 x 70mm (3);Nylon Wall Plug (3) ;Lag Bolt Washers (3) ;M4 x 12mm Screws (4) ; M4 x 30mm Screws (4) ;M5 x 12mm Screws (4) ; M5 x 30mm (4) ;M6 x 12mm Screws (4)… Yes, It come with neccesary bolts. The Accessories: 1 manual instruction, 3 zip ties, 1 spirit level, 6ft HDMI cable. Installation Hardware Includes: Lag Bolts M6 x 70mm (3);Nylon Wall Plug (3) ;Lag Bolt Washers (3) ;M4 x 12mm Screws (4) ; M4 x 30mm Screws (4) ;M5 x 12mm Screws (4) ; M5 x 30mm (4) ;M6 x 12mm Screws (4) ;M6 x 30mm (4);M8 x 16mm Screws (4) ; M8 x 45mm Screws (4) ;M4/M5 Washers (4) ;M6/M8 Washers (4) ;TV Spacers L 3mm (4) ;TV Spacers L 7mm (4) ; TV Spacers L 15mm (4)

There are screws to hold the TV. Tighten screws to mount the tv to the bracket, loosen screws the dismount the system.

Check out the installation video in position 7 in the pictures. It shows you a step by step guide to installing.

The tv mount have the powder pating. Happy Thanksgiving Day!

Yes, the tv mount swivels TV left or right 90°.

Yes, it’s the same tv I mounted on my wall.

Definitely! My husband actually just pulls the TV out (since it articulates so well) and attaches or detaches whatever he needs and then you just push the TV back in. Very easy!

Thanks for your question. 3/8” drill bit is needed for masonry wall, 1/8” drill bit is needed for wooden wall, and all required hardware like lag bolts, screws, and washers are included.

Thanks for your question. The size of the lag bolts is 6*70mm. Thanks.

As long as your tv is under 88 lbs and is up to a vesa 400mm then yes it should.

yes. remember make sure dont go over the weight capacity of the mount

It is universal which is adjustable to different mounting holes- so it should work

No, It don’t support the corner tv.

The distance between holes can be adjusted. This wall bracket could be set up on studs between 8”-16” and concrete wall. And the vesa (the holes in the back of your tv) ,maximum 400 x 400 mm, minimum 100 x 100 mm. Thanks.

Yes,This tv mount extends up to 14" and retract back to 2.65" from the wall, ±3° level adjustment.

Great mount! Very sturdy, I’ve had my Samsung 65″ 4k curved TV mounted to it for about 2 weeks now and it holds it with ease. Not all flimsy or crappy like some other brands out there. Very easy to move around and tilt.

Typically don’t leave too many reviews, but this one deserves it. Here’s why:

1: Build – this is built strong. Very strong. It says it supports up to 88 pounds – I think it would probably do more, but, you know, don’t test that. Movement of the stand is initially very stiff, but you can tweak this with a hex wrench. The plate that mounts to the wall has about a zillion places where you can put the bolts in. I made use of this to test the initial fit (using long wallboard screws) before putting the big screws in. If you for some reason doubted the durability of the four big screws they include (which I don’t – they’re enormous), you could fit like 30 screws through this thing. The place where you mount it to the wall and the place where you mount it to the TV both adjust sideways, but, unlike the mount I had before, which allowed the TV to freely slide side to side even once mounted, you can lock it down so there’s zero horizontal movement.

2: What’s included – this is where the seller/manufacturer really shines. They threw in every single thing you could possibly need to mount this thing to anything, anywhere. Screws and bolts? Yes – every possible kind. Multiple options for washers between the TV and the mount. Hardware to put it in a brick or concrete wall if you want to do that. Bolts and screws both. Every conceivable variety of washer. A level – a big one, not the tiny useless ones mounts usually include. A mounting template with instructions printed right on it so you can read them as you’re actually putting up the template. They even threw in an extra HDMI cord, which I used (thanks!) and some cable-management ties (which I didn’t use, but only because I already had some).

Everstone, seriously – A+. Five stars. 10/10 would buy again.

This was great! I have a brick fireplace, the kind where the whole wall is actually brick- not a brick veneer/facade like they use in today’s construction. Because of that, I was leery of mounting my tv- thought I’d have to cover the brick with studs/drywall first. Thankfully, I was wrong and this project turned to be way simpler than I thought. I paid my electrician $240 to install an outlet over the fireplace and he also mounted my tv. It took him a total of 2 hours from start to finish, but it only took him about 20 minutes of that to mount the tv- even with having to drill through brick! He was very impressed because this mount came with so many kinds of screws. Anwho, the tv is up now and it changed the look of my whole family room since I no longer need the huge credenza my tv used to sit on. If I mount any more tv’s I will definitely repurchase this. (For reference, I have a 55” Vizio).

I can’t be happier with this producto. Is not that easy to install, it took me about an hour and 20 minutes. But for the price you have more than expected cause they even included a hdmi cable

Sturdy, versatile mount that was pretty easy to install. I imagine most won’t have this issue, but it’s worth mentioning that while the package included a wide variety of screws and washers, it did not have screws long enough to fasten the mount to the slightly wider bottom half of my Samsung TV (Model UN55MU8000FXZA). Easily resolved by a trip to the hardware store and $2.00, and certainly not enough to drop my rating considering the very reasonable price (BestBuy had similar products for $60 and up). Overall great purchase!

Mounting was fairly straight forward, but still difficult to do. Definitely a two man job! That is to be expected with something like this though, so not worth docking a star for. We have mounted 3 televisions, the largest being a 50 inch. The televisions seem to be very sturdy, only time will tell if they are as sturdy as they appear to be. None of the t.v.s have fallen yet though so that’s good in my book! Maneuvering the televisions to the position you want, while a little difficult (understandably so, this way the telvison is much more stable), is great. That way, once it is mounted, if you don’t like exactly where you put it you can move it a little, or if you decide to rearrange a you can move your t.v. to work with different set ups! I love that this comes with a level and an HDMI chord! Iv’e used the level for many other things, and the HDMI has come in handy as well! Overall, I would definitely recommend this product!

I love it 😍😍

I have a curved 65″ samsung TV, so when I saw that this mount maxed at 65″, I was a bit nervous (as anyone would be while mounting a $1000+ TV on a $30 mount). However It has been on my wall for a year now and has beed sturdy every since I hung it up. Because my tv is so heavy it is a bit hard to use the “push into wall or pull out off of wall” feature, however you can get it to go with the right movement. It swivels like butter. the only downside is that the screws that control how angled up or down it is are not big enough to control the size of my TV, so It is always angled toward the group at its max which I believe is 10 degrees (I might add that this does’t bother me at all because even If I had the option to tilt it I would have it at the same setting). Overall, great mount. Easy to install, Only thing I had to work a little harder to find was a stud finder for my wall- but you can always go the good old fashioned way of tapping your knuckle to hear the difference. If you have a 65″ TV I might say go elsewhere, but only if you mind having your tv angled down toward the viewing point. I will most likely be buying again as the person who is moving into my room will use it for their TV. Would recommend, very happy with purchase.

Solid mount. Mount can be put on wall. Brackets attached to television, and then the set can be hung pretty easily. Set screws lock the tv to the mount so you can’t accidentally “unmount” it while moving it around.
My only suggestion would be a wider wall mount so you could hit 3 studs rather than two. Two seems to be enough…..but I love overkill.
Good price and no complaint about quality.
If you don’t get it perfectly square with the wall, there is an adjustment to rotate it slightly.

Used this to mount a 40″ TV outside on a concrete block & stucco exterior. I was very impressed that the mount came with absolutely everything you’d need except a hammer drill. It includes M4, M6, and M8 bolts of multiple lengths + washers and spacers (for curved TVs); velcro cable ties, and most importantly for me, concrete wall anchors with long hex-head lag screws.

I don’t know what they were thinking using dark blue liquid for the included torpedo level but it’s workable with if you don’t have a level of your own and have plenty of light available.

The mount feels rock solid in the wall, it was easy to adjust and tilt, and the two bars seem to be strong enough that it doesn’t sag even when extended all the way out. I would absolutely buy another one of these if I mount another TV in the future!