Full Motion TV Monitor Wall Mount Bracket Articulating Arms Swivels Tilts Extension Rotation for Most 13-42 Inch LED LCD Flat Curved Screen TVs & Monitors, Max VESA 200x200mm up to 44lbs by Pipishell

This is actually 5 3/4"

Dear Customer,
Thanks for your question.
… Dear Customer,
Thanks for your question.

Yes, our 32 tv wall mount PISF1 is suitable for these three walls (wood stud, concrete wall, brick wall).

If you have any other questions, please feel free to contact us at [email protected]
Best regards
Helen
Customer Service Center

It’s technically works, but is poorly designed in this regard. How easily it stays really depends on your bracket position. If it’s vertically in the center of your tv/monitor (not high or low, but in the center) it stays easily in the portrait position. Mine is off-center too high. I had to crank down that bolt pretty… It’s technically works, but is poorly designed in this regard. How easily it stays really depends on your bracket position. If it’s vertically in the center of your tv/monitor (not high or low, but in the center) it stays easily in the portrait position. Mine is off-center too high. I had to crank down that bolt pretty hard to get it to stay. Getting an adjustable wrench in their is tough without removing the tv/monitor, and you can forget getting a socket wrench in there. It also loosens again when you rotate it back to landscape. They could have used a different type washer, or maybe a locking wheel bearing of some kind. The tilt is also associated with the wrong bracket so you lose the up/down tilt, i.e. it becomes a left-to-right tilt which you already have with the arm swivel.

Dear Customer,
Thanks for your question.
… Dear Customer,
Thanks for your question.

You need adjust the tilt of the TV wall mount through screw driver. Thanks your suggestion, we had sent it to our quality department and improve our product in the future.

If you have any other questions, please feel free to contact us at [email protected].
Best regards
Helen from Customer Service Team

Entiendo que si, si el monitor es tamaño de TV.

If it has the standard 4 screw mount that most brands have it should work well. The mount is well made.

Dear customer,

Thanks for your question. … Dear customer,

Thanks for your question.

This TV wall mount fits various soundbar mounts.

If you have any other questions, please feel free to contact us at [email protected]

Best regards
Lucy
Customer Service Center

Hi, thanks for your question.
The vesa pattern of this full motion TV mount is from 75x75mm to 200x200mm, if the vesa pattern of your TV is within this range, then it is compatible.
If you have any questions, please feel free to contact us at [email protected]. … Hi, thanks for your question.
The vesa pattern of this full motion TV mount is from 75x75mm to 200x200mm, if the vesa pattern of your TV is within this range, then it is compatible.
If you have any questions, please feel free to contact us at [email protected].
Best regards,
Customer Service Team

20 kilos aproximadamente.

Are the bolts that mount the bracket to the back of the tv supplied

Unfortunately, no. This wall mount is intended to line up and attach to the pre-existing holes on the back of your TV.

Dear Customer,
Thanks for your question.
… Dear Customer,
Thanks for your question.

Yes, our TV wall mount PISF1 is compatible with LG tv, vesa100x100.
But knowing more details could help you choose our products:
First, our tv mount is suitable for these three walls (wood stud, concrete wall, brick wall).
Second,Second, please check your TV weight.Our TV wall mount PISF1 is compatible with most of 13" – 42" TVs with VESA from 75mmx75mm to 200mmx200mm.
Max. weight capacity up to 44 lbs.
Finally, make sure the inputs on the TV back will not be blocked by the TV mount.
If these parameters are met, our TV wall mount is compatible with your TV.

If you have any other questions, please feel free to contact us at [email protected]
Best regards
Helen
Customer Service Center

Hi, thanks for your question,
We currently do not offer installation service, if you need the installation service, hope you can contact Amazon.
If you have any questions, please feel free to contact us: [email protected] … Hi, thanks for your question,
We currently do not offer installation service, if you need the installation service, hope you can contact Amazon.
If you have any questions, please feel free to contact us: [email protected]
Best regards,
Customer Service Team

Hi, thanks for your question.
This full motion TV mount can swivel 90 degrees to the left or right, but if the mount is installed on the corner, the range of movement will be limited.
If you have any questions, please feel free to contact us at [email protected]. … Hi, thanks for your question.
This full motion TV mount can swivel 90 degrees to the left or right, but if the mount is installed on the corner, the range of movement will be limited.
If you have any questions, please feel free to contact us at [email protected].
Best regards,
Customer Service Team

Hello, thanks for your question
The dimensions of the wall mount plate is 6.69”x2.36”(17x6cm).
If you have any questions, please feel free to contact us at [email protected]. … Hello, thanks for your question
The dimensions of the wall mount plate is 6.69”x2.36”(17x6cm).
If you have any questions, please feel free to contact us at [email protected].
Best regards,

Based on the price I didn’t expect much. Like they say you get what you pay for.
BUT this has blown me away. This was easy and very simple to put up. It came with plenty of options to screw into the back of the tv. Once we decided on a spot to put the tv, this was installed in less than 10 minutes. The only tools I had to provide was a drill to pre-drill the pilot holes and a socket wrench to screw in the bolts to hold it to the wall.
The range of motion is awesome.
The wall mount sits the tv about 4” off the wall and extends out to turn our 32” tv completely sides ways both ways.

This is a very well made Strong tv wall hanger. I love love love it. I researched around and this was the one that matched all my criteria (extending arm, tilt, swivel, well made, easy for 1 person) with the reviews that backed it up. I read all the reviews on all of them, but paid special attention to the 1, 2 and 3 stars. That’s where you find the best info before looking at the 4 & 5! This one fit the bill and I wasn’t disappointed.
Now, if you have basic tools -drill, ratchet socket wrench (I don’t) the whole process will take you about 10-15 minutes. I don’t have a stud finder (stud is an absolute must for drywall/plaster walls). But I do have a strong magnet and easily found my studs just running it over the wall, then vertically once I found the stud I wanted to use. Usually there’s a stud right beside L or R of an electric plug box then 16 inches L or R of that to the next stud. I marked the nails I found in the stud in the area I wanted to attach the hanger so I didn’t go in on top of one. I don’t have a drill, so I hammered in a thin nail, pulled it out, then a thicker nail, pulled it out to make my ‘drill hole’ for the top screw (they are big and thick). I lined up the top hanger hole over my hole and marked where the bottom hole of the hanger was, then held a necklace from the top hole (I don’t have a leveler) to check and make sure it was perfectly aligned. A ratchet socket wrench would have been awesome, but I don’t have one, so I hand turned and turned and turned the bolts into the wall attaching the hanger (swing the hanger to the L if you are R handed). 2 seconds to attach the plate to the back of the tv. I recommend a practice run attaching the plate to the hanger BEFORE you attach it to your tv. It’s easy, but then you can see how it should sit and how the screws’ position holding it on in the hanger determine the tilt/no tilt. Also, move the arm around to get an idea of how easy it is to position. Pull the arm out, set the plate now attached to your tv in the notches, put in the 2 simple screws, plug in your attachments to the back of your set, position where you want it & you’re done!
Find your stud
Drill 2 holes
Attach hanger to wall
Attach plate to tv
Hang tv on hanger
You’re done.
Easy peasy! They were right as advertised. 1 person can do it. Even with minimal tools!
Highly recommended product, well made.

Pretty straight forward to install, the stud seem to sound like it was splitting when we were installing it and my son kept joking telling me it’s going to fall off the wall at 3am and scare the crud out of me! But I say Nay Nay! I like it and it really does have quite a range of motion, but having said that when it moves I kind of freak cuz it feels so loose and I loudly gasp, but so far so good! I think an experienced man would have better luck installing than me a single mom and son team 😉 I’m happy with the purchase I just have to figure out about hanging wires now.

I brought in a friend who has done this many times because I thought it would be a problem – NO PROBLEM. He as impressed at how easy we mounted this. The only additional tool (obviously) was a stud finder and from there we had everything up in a short time. We have been using it to watch cooking lessons in the kitchen and it is really good. Great flexibility.

I researched the reviews of a number of perspective wall mounts for my 40″ Element TV at this affordable price point. I purchased the Pipishell because the majority of the reviews were positive and quite consistent in their critiques.
When the box arrived, I was surprised at how small it was. My boyfriend put it together & he said it was really easy. I can put cat trees together fairly quickly, lol, and after looking at it, I’m pretty sure I could’ve done it too.
**TIP-CHECK THE SCREW SIZE FOR CONNECTION TO THE BACK OF THE TV 1ST!!**
Mine included 8M and 6M, I think, but my TV required a 5M. I had to go to the hardware store to buy an 8 pack of 5M (5 mm) screws, even though I only needed four, for ~$5. It was rather disappointing to my Love that he got all of that done while I was at work but couldn’t have it finished when I got home because he got to the final step and didn’t have the correct size screws & the hardware store was closed. When I did get the screws and mounted it, I loved it!
I need to save as much space as possible in a small casita so I ditched the TV stand and gained so much space!
I’ve had it installed about a month now and love it so much, we just ordered a Pipishell for my boyfriend’s 50″ Samsung TV.
FYI, this is the first time I’ve mounted a TV, so I have no previous comparable experiences to draw on. Bottom line, this is a strong TV mount and excellent value, in my opinion. 😷✌️🌞

Purchased this stud wall mount to make it possible to be able to clean the glass that sits on top on the armoire. My wife tells me that shes thinking of changing the bedroom around. So to wait on finally fully mounting it to the wall.
It was simple to real the instructions, and notice that the 4 TV wings (that span to the back of the TVs mount holes on my Samsung 42″ flat back fit perfectly. No spacers are required, unless you have USB port or cable in the way. I didnt.
The screws provided at the 3 MM sizes and each screw of the 3 sizes. Have 3 different lengths of the that particular metal screw. I went for the middle size mm, the selected the shortest screw and that was what I needed. I used a x-tipped screwdriver ( no drills should be used) and an adjustable wrench. I finger tighten, then used 1/4 turn to tighten the bolts.

This TV Wallmount was Super Easy to Assemble. TV Base mount. Then depending on your TV (mine is the 42 Samsung so the 4 spanning wings (what I call them anyway) were needed to span the mounting holes.

It slightly funny. I’ve read reviews on other wall mounts, and on a different wallmount, his TV fell and shattered the LCD screen. He posted a pic of the wall where it fell from and the sheetrock broke! That person didnt NOT screw it to a stud, he mounted it to Drywall! If your not going to follow the instructions for these Stud wall mounts, and some bad happens, you have only yourself to blame.

I purchased this for a small 32″ tv for my bedroom. Its perfect. i was able to install myself with no help! I wanted to be able to watch tv from anywhere in the room-and the swivel option allows that. I don’t feel like its going to pull off the wall as I adjust/move the angle!

I purchased the first one over 5 years ago for my home office to support a flatscreen monitor/tv, loved the ease of installation and the range of motion offered by this product. I have purchased two others since. The price is great for such a well made item. I have purchased or installed other brands because I needed them “Right now” for a lot more that were very troublesome and much more expensive! Great Product.
I used mine on a 32″ tv this time around that is lightweight. but have used it for other heavier TVs

Honestly, I’ve had a lot of mounts over the years – of varying prices. This one was a pleasant surprise as it was reasonably priced and of pretty awesome value. With the supplied extenders and varying lengths/widths of screws given to you, there should be no issue mounting your TV (unless you’ve got something totally wild, but that’s on you for buying a weird tv). I needed the full swivel ability as I need to spin the monitor it is holding on its side once in a while and this does that perfectly. Oh, and the screws which secure the mount to the wall are absurd, like you could probably mount a golf cart to your ceiling (no, not really, but these things are big boys) with them if you wanted, but that’s pretty awesome, no doubt that (if you install them correctly), they’re not going anywhere (ps, you shouldn’t need to be told this, but it is always better to mount into a stud in your wall, seriously, find a stud. Either knock and listen for the difference in sound or spend a few bucks and get a stud finder, which often will also inform you of any electrical wires in the general area you’re using it on).

The media could not be loaded.  I needed a cheap wall mount for my guest bedroom, at first I did not expect it to do well, but it did so well that I bought a second one for my office. It has a slightly stiff feel it moves very smoothly. For the price, I would use this one over and over again it came with an enormous amount of hardware that would accommodate any TV within its fitment range.