Full Motion TV Wall Mount with Height Setting, JUSTSTONE TV Bracket Fits Most 27-70 Inch LED Flat&Curved TVs,Articulating Swivel Tilt Dual Arms Extension Max VESA 400x400mm and Holds up to 121 LBS

This mount should be able to adapt to any TV. The mount can be moved around to line up where it needs to be attached to your TV.

The TV mount comes with the anchors and screws to use in wood, drywall or concrete walls plus the size bit one will need for the anchors.

Yes, you will be able to move it left or right a couple inches or so from dead center. It has 2 ways to pivot. Good mount, have put up 2 of them.

I got bracket and 3 screws, mount 2 directly to a wall stud then I used 2 other wall mountsthat I already had and attached to dry wall.

They might make one but this one won’t go quite 90 degrees with my 55”. It’s a great, strong mount though and I’ve since bought another one!

Yes. I have my 60 inch TV mounted on it. Just check the mounting bracket size on the TV you bought. It should say it in the specifications

hello,this tv wall mount not include a cable box .

I dont see why not as the mounting holes on the back of TV are adjustable to fit all modern tvs.

The wall mount is 8” wide, and 20” long. It’s easy to install and fist nicely between two wall studs.

You turn the bottom screws till it hooks on

Yes. It holds my 55in TV.

Yes, it will work.

hello,
Thank you for you question,this wall plate 17 3/8 “ x 5 1/4” ,it will fit 27-65 inch and hold up to 121 lbs.

Yes

Will work on 27"- 65" tv’s. Should work without any problems.

Best mounts I’ve had for the price I paid for them… I mounted a 50” and a 65”

This is a good tv mount. It comes with everything you need to set it up and attach it to the wall, even a paper template. It is very sturdy and holds our 43 inch tv with ease. It comes with a handy level so you wand mount it straight. Nice tilting up, down or side to side. The range of motion is good and very easy to maneuver, and it stays put once it’s Ben adjusted. Well Made nice mount

Awesome TV mount!
Very durable! Easy to follow directions, easy to install , amazing value! Works great for my 60” TV great swivel motion! Worth every penny

I work for HelloTech and I use this mount for every full motion mount I have to provide, it’s the easiest to install and will hold almost anything. I have tried 5-6 different full motion mounts but settled on this one because it’s by far the easiest to install, unlike some other (ONN I’m looking at you) there is no assembly of the mount necessary, just mount the wall plate, attach the brackets and hang the TV, it really is that simple. I”ve installed probably 25+ of this mount and it literally takes minutes. The part that takes the longest is figuring out how high to mount the wall bracket to get the TV the height you want, which this mount is also great for since it has to options once you get it on the wall.

So, first, a “beware”. This thing is only sized for 18 inches wide studs at the max and 400×400 pattern. So, while it is beefy enough to hold a HUGE and HEAVY tv…. My old heavyweight had a 600×400 pattern. I rigged a fake pattern with a roll of duct hanging strip. But, the 18″ limitation combined with the pattern hack meant that the install wasn’t exactly at the location I wanted.

My TV though is near the top end of the weight limit, and the range of motion and angle adjustments are still good with it being that big.

My big issue is with the mechanism that allows you to hang this TV’s. It’s just 2 very small and very shallow tab slots on it. And, since the whole thing is right at the 400mm width, you don’t have side to side. So, they barely stick out to latch on, and you have to be perfectly centered. So you are holding a heavy ass 50-70 inch TV, and trying to blindly aim for two spots that are less than a half inch targets. And happen to only catch 1 of the sides of mount, and let down, the whole thing twists so the opposite rail is an inch or two higher.

When that happens, you’re screwed because you can’t just lift the whole thing up… You have to tilt it. And if you’re close to the ceiling, the tilt puts the TV corner into the ceiling.

It’s frustrating and took us multiple attempts of setting it all back down, realigning to the mount to true, and trying again.

Once it’s on… smooth sailing. With a light tv, probably would have been a snap. But, if you, like me, found this because it was the cheapest, highest rated, heaviest articulating mount on Amazon…. Just know that you have to align it to studs, and you have to nail a perfect landing (with a 10 from the Russian judge) when you go to put the TV on the mount itself.

I bought this mount to hang my mother’s TV in her bedroom. The TV is her old unit from the living room, a 42″ Screen. I was concerned as to whether the walls in her home (an older mobile home) would be capable of handling the weight. My only disappointment was that the portion that mounts to the wall was not wide enough to align with the studs in her wall. This was more of an issue with the studs in the home as they were not set at a normal width apart. I remedied this situation by using lag bolts to mount a 3/4″ piece of plywood to the studs and attached the TV mount to the plywood. This created a solid mount to the wall and studs with no concern for failure. I am a pretty big guy at 6′ and 260lbs. I grabbed the mount where it was attached to the wall and was able to lift myself off the ground. Once the TV was put in place we were able to extend the arms to their fullest from the wall with no issues. The TV is more than secure. As a bonus the company includes a small magnetic level and a paper template for mounting holes that make the install job so much easier. I would not hesitate to use this TV mount again.

Mounting to the wall is super-easy with the included template. Plenty of hardware for different TV VESA mounts. Firm joints. Easy to adjust, then stays put. Verticle angle locks.
Out of all the TVs I’ve mounted this was the quickest and easiest.
I recommend this product.

PROS:
– All necessary hardware
– Easy to Mount with template and included lag bolts
– Sturdy Construction
– Fully Articulated
– Vertical Angle Adjustment Locks (pictured)

CONS:
– Anchor Screws (pictures) Don’t Actually Overlap Lateral Crossbar
– Bubble Level Not Magnetic and very small so I didn’t use it.

This is a very well built mount. Every point that moves has some type of washer for smooth operation. I mounted a 43″ TV that only weighed a little over 15lb’s and would buy this again.
Now for some of my thoughts.
If I were going to hang a TV that weighed more than 65 lb’s. I would like the part of the bracket that mounts to the wall to be wider and taller for more support.
Make note this bracket is made to be mounted on a wall that has studs that are on 16″ inch centers. Some homes only have studs on 16 inch centers that are outside walls and the interior walls are on 24″ inch centers. Be sure to check this before ordering. You should not hang a TV on sheetrock only. You could come home and find laying in the floor.

Super easy to install. You can almost hang off it.
The cool thing is it gives you full range of motion where you can adjust the tilt of the tv. The last couple mounts we did use did not allow side to side tilt. This one does, so when you pull the tv away from the wall you can adjust it so it’s not crooked. Install is super easy, took more time unboxing it than putting it up.
Use a strong magnet and find your studs to mount to. If you put a strong magnet in a plastic bag and swing it side to side on a wal you can find your studs pretty easily. The wall mount gives you plenty of mounting holes for the wall. Happy with the purchase, would buy again.

The media could not be loaded.  Perfect mount for my new 65 inch Samsung 8k TV. It’s easy to install with 2 people about 30 minutes and has a nice range of motion including front pitch up and down. Easy to level for the perfect fit to your TV. Best $30 you’ll ever spend on a full motion mount.
It comes with a variety of bolts to connect to the back of your TV but of course none that fit mine. A quick trip to Home Depot and found that metric #M8 16mm with 2 spacers that where provided in the kit that fit my TV. Other then that a very easy installation providing you have a good stud finder.