Garmin Bike mount, quick release, quarter turn

I really do not think so. The attachment for he Garmin Edge 500 is quite different than that of the Nuvi

Yes. It works. I use the same mount with edge 500 as well as edge 25

It works perfectly with my Edge 820, so I think it would work for the 830.

Not familiar with that device.

Yes Ma’am, this will work with the 1000 and the rest of the Edge series. I have an 800 and an 820 and I use both kinds of mounts. This minimal one is not as secure as the solid plastic ones like this one for instance: https://tinyurl.com/y99va9w3 With heavy use in hot, sunny weather, the O-rings could deteriorate. … Yes Ma’am, this will work with the 1000 and the rest of the Edge series. I have an 800 and an 820 and I use both kinds of mounts. This minimal one is not as secure as the solid plastic ones like this one for instance: https://tinyurl.com/y99va9w3 With heavy use in hot, sunny weather, the O-rings could deteriorate. Again, if you are a frequent cyclist. These rings can also easily slip off any shimming you use to enlarge the mounting surface. I tend to use old inner tubes. However, if you are looking for a very minimal, unobtrusive mount, this works well. I give it a solid four out of five stars.

I haven’t seen an Edge 510 but take a look at http://sites.garmin.com/edge/ They show a rotating 510 which exposes the back and you can readily see that the bike mount is standard and is identical to my 200 model which uses this mount

Yes, the 800 has the same 1/4 turn lock system as the 500

I do not know what a bryton rider 310 is?

Si el XOSS G+ la base es el mismo del Garmin, creo que si le va perfectacmente, yo tengo un Meillan M1 y le va perfectamente.

Amazon has them and they work perfectly for my Garmin 520.

When you say Rubber Gasket. Are you talking about 1 off of the Garmin itself or off of the mount. I do not have a rubber gasket on my Garmin and it goes on the mount just fine. You might already know this the rubber bands you see in this picture are the rubber bands that go around the stem or bars of your bike. Sor… When you say Rubber Gasket. Are you talking about 1 off of the Garmin itself or off of the mount. I do not have a rubber gasket on my Garmin and it goes on the mount just fine. You might already know this the rubber bands you see in this picture are the rubber bands that go around the stem or bars of your bike. Sorry I don’t have a clear answer to your question.

I’m not sure what the mount looks like for the Edge 130. I would need to see the back.

Yes, this will work with the 1000

Two

Only if your gps has a configuration which can be inserted into the bike mount. I am not familiar with your device but I would suggest you call the gps company for conformation and they might have their own attachment.

Two simple bands can be used to attach this mount to most handlebars, or time trial bars. Easy to rotate the mount when installing so the Garmin device will face the way you want. Bands are nearly unbreakable. Mount on my other bike has lasted about 7 years with no problem. With this mount, I can move my GPS between two bikes easily. Genuine Garmin.

If you have multiple bicycles as I do, don’t keep moving the mount as the more you stretch those securing bands the weaker they get and could possibly break. I now have mounts on all four of my frequent riders and just move the computer from one to another easily.

You get a pair of the plastic mounts and four pair of the elastic bands. We fastened one mount to each of our trunk bags with zip ties and they work great with the Garmin Varia tail light.

I bought this so I could mount my Karoo on my road and mountain bike. This kit came with 2 mounts which was awesome. It works perfect since the Karoo uses the same mount as Garmin products. The mount is nice and snug but not too tight. The Karoo positively locks into place and stays put. It’s a bit heavier than other garmin devices. So far the rubber bands have lasted the entire summer. Not sure how many season total I should expect, but they still look good.

These mounts are very light, inexpensive, easy to install and hold my Edge 130 Plus very securely. I don’t know how well they would hold a larger, heavier GPS but they are fine with the one I have.

Easy installation in the place of your choosing. Nice and secure. Have used on the road and on mountain biking trails.

Works good, great value. Comes with two mount units, one for the road bike, one for the mountain bike, one for the hybrid commuter, one for the rain bike. So I bought two sets of these. On the one hand, a sturdier mounting system would be nice. On the other hand, the "rubber band" mounts hold snugly and allow a good variety of mounting positions, and the bands will probably last 2+ years, and with any luck, only one would break at a time, avoiding the problem of GPS dumped out on the street while riding.

Comes with 2 garmin mounts, and LOTS of bands, Very happy with the purchase as my old mount has been getting loose!

Bought this mounting bracket to replace an off brand cyclometer GPS mount that rattled. These Garmin mounts fit properly, don’t rattle, and work on the stems of both my bikes. Great purchase.

Very low profile at an affordable price. I have one on every one of my 10 bikes which allows me to use my Garmin on whichever bike I’m riding at the time.