LISEN 2 Pack Magnetic Phone Holder for Car Vent, [6 Strong Magnets] Magnetic Car Mount, Hands Free Air Vent Cell Phone Holder Mount for Car, Fit 4-11in iPhone 13 Pro Max,13 Pro, All Phones & Tablet

Video could not be loaded

Video could not be loaded

This phone holder is small and compact and snugs right up on the car vent. It is barely noticeable. I put it on my vent and it stays there. It does a great job of holding my phone

This bracket can use a thin shell with a thickness of ≤3mm. We recommend that you do not use thick, liquid silicone or mobile phone shells with lines and more gaps, and directly attach the magnetization sheet to the back of the phone to avoid affecting the use of the bracket.

Lisen has prepared some very cool metal magnetic pieces for you, you can search for lisen phone magnet metal plate to place an order.Have a nice day!

This product is used for horizontal vents in automobiles, with a maximum support capacity of 0.1 feet, suitable for wide blades. You can measure whether it fits your car based on this size.

No, since the surface of Otterbox case is uneven, this magnetic car mount is not recommended for phones with an Otterbox case.

Each vent slat in my car runs from let to right. I think that it would probably work if the slats ran from top to bottom. The piece that actually attaches to the phone moves to go sideways or up and down as pictured. It should work on any air conditioning vent. Once it is attached, it is very secure and holds my phone … Each vent slat in my car runs from let to right. I think that it would probably work if the slats ran from top to bottom. The piece that actually attaches to the phone moves to go sideways or up and down as pictured. It should work on any air conditioning vent. Once it is attached, it is very secure and holds my phone without ever coming loose. I have a smaller iPhone, but a friend of mine has the same holder and she has the big iPhone, and the reason that I bought it, was because it holds hers so tightly. Hope this helps!

I would think it will. You don’t wanna have any magnet close to credit cards.

The diameter of the ball on the swivel is 0.59in,and he maximum reach of the hook that holds to the air vent is 1.02in. Have a nice day!

It comes with some magnetic stickers that you can attach to your phone or phone case

Video could not be loaded

Yes, it is recommended to use the "square pad" on the back of the phone/phone case. It is more stable than the round.

I placed the metal at the very bottom, my Samsung galaxy 9+ charges perfectly fine when placed correctly over the wireless charger.

It does swivel and tilts. It comes with a screw that you can use to thighen the position. However, I prefer to leave a bit loosen so that I can change the orientation on the go

Finally, someone has made a phone holder that works. I recommend this holder very strong magnet will come the vent because of the lip on the end when you tighten it down it stay in place. very well made!!! I have gone through so many others and they were crap. Buy Buy Buy you won’t be disappointed

This item works great. I have been looking for a phone mount for when I am driving and love this as you use use the vent instead of mounting something on your dash or using a cup holder.
I love the way it attaches to your air vent with the hook instead of clipping on and falling off.
The magnets are strong and I have not had my phone fall yet.
There package also came with 2 round and one rectangular piece that attaches to your phone. This gives you the option to use the phone holder with more than one phone if you share a vehicle.
Overall I like the magnetic phone holder and would buy again.

Needed two magnetic cell phone holders for a Lexus UX for my wife. (She doesn’t want to be bothered by Car Play or Android Auto). Regular magnetic mounts wouldn’t work because of the design of the vent slots but these just barely do.

I usually don’t write long reviews but I will make an exception for this product. First it is absolutely the best way to hold your phone or a GPS device in your car. The magnet is super strong and it is not that noticeable clipped to your vent. I have literally tried every type of GPS holder made and this is the best. It is very sturdy and clips on to your horizontal vents without any issues. I keep mine attached to my vent as I am not worried about someone seeing it and making a connection with a GPS device as with other GPS window and Dash mounts.

To use this with a Garmin GPS device you need to first buy the SCOSCHE MAGDGPS MagicMount Universal Magnetic Mount Holder. This has a magnet to attach to your Garmin. You can discard the holder as I consider it to be much inferior to this one. I think Lisen is making a big mistake by not selling this as a GPS mount and not having a Garmin GPS magnet to use with this vent mount as this firmly holds my 6 inch [heavy] Garmin Drive 60 GPS Unit. This setup will hold your phone or Garmin GPS. I attached the magnet from this Lisen Vent mount to the back of my phone case and attached the SCOSCHE MAGDGPS magnet to my Garmin GPS and I just use either one when I please.

This holder is just what I was looking for. I used to use a magnetic holder that was a little thicker with a very strong magnet. I liked it for awhile, but I figured out that the mechanism that holds it to the vent louvre loosened easily, and eventually (after a few months) slipped enough to become useless.

I searched for another model that was hopefully identical, but used a sturdier mechanism to attach to the vent louvre. This holder is *almost* as thick and sturdy, but perfectly adequate nonetheless. This one was the only one I found that attaches to the louvre with a hook that cinches and holds strongly! Ingenious! It holds steadily and stayed steady and secure during the entire time I’ve been using it…. about 5 months or so now.

The only caution is that range of rotation is not as wide as that one I used before. I have it mounted on the right-of-center vent, and it is tilted left towards me as far as possible. This is perfectly adequate most of the time, but I wish it tilted just slightly further once in awhile….just slightly…. for a particular reason that I don’t want to disclose here. I’m being a little nit-picky here, but it’s perfectly usable and it’s the only “flaw” (if you can call it a flaw) that I’ve learned to deal with.

Aside from that, this product is great and I highly recommend it!

Great product for a great price. You get two for what you pay for one of a different brand. I have a 2020 RAV4 and a 2010 corolla

This was the third phone holder I bought to try out. The first two were friction holders but because I have a pop socket on my phone case they would not hold my phone in. I searched for the deepest phone holder but none worked. Sent those back and ordered this one. It was a gamble because I figured I could attach the round metal plate to my popsocket and have it hold, unfortunately, the popsocket rotates freely and because it is not perfectly centered on my phone case ( to make room for the fingerprint sensor on the back) it would end up upside down. I instead used the rectangular metal plate between my phone and the case but because of the popsocket being off center I had to put the plate on the bottom third of my phone. So I can’t use landscape on my phone but that’s ok, it holds strong enough to view my phone vertically. Another issue was the double sided tape was too thick to fit between my phone and my case so I removed the tape with a razor (be careful) and that was enough to fit it between my phone and the case. I also had to modify the vent mount hook by adding a 1/2″ wide piece of sprinkler riser from the back of the holder and my vent, I did this because when I had the hook all the way tight, it would not touch the vent piece as my vent slits are flush with my dash. So as you can see, I was determined to make this work. I wanted my popsocket and my case without sticking anything permanently to my phone itself. Sorry this is so long but I want it all apparently. It works awesomely now. I put the other one on my wife’s car (2014 altima) and it attached nicely to the vent without any modifications necessary, well, I did remove the tape (with a razor) and slid the bare rectangular plate behind her phone between the case. If you made it this far, congratulations! Buy this phone holder.
***11/6/21*** update
I was in a rush because I was late to work and my aux cord was wrapped around my phone holder and when I unplugged my phone the cord end got stuck between my lunch box handle, which I hadn’t noticed, as I grabbed my lunch box it ripped my phone holder off and broke the vent fin on my car. The mount still works but it WILL break your vent if you’re not carful. I would still buy it, it is very strong.

Took a little bit to get it located in a spot I liked in my car, but that was the hardest part of the process.
The product description says that it is not meant to be used inside of a phone case, but I have a simple spigen case, and the magnets have no issue going through that to make a secure conneciton with the metal plate. It is strong enough that I can hit a good bump and it does not go anywhere, but having the case on it makes it very easy to slide and peel off without needing to wrestle with it.
Makes for a nice routine to sit in my car, slap my phone on the dash, and be able to have all my media, gps, etc right there at my finger-tips!
Got the double-pack so my wife’s car has one too, but I don’t think she uses it. However, her phone case has a built-in ring holder/stand, and the connection with that is also very strong, so she does not even need the metal plate.

This is one strong magnet. I have a heavy phone and a military grade case (thick and heavy back) and the phone stays in place. I obviously used the larger metal plate to give a bigger area of attachment. It works. There are times where my phone pivots but I have used this for a month already(everyday) and never had a fall.

I compare this to my previous, larger, magnet holder and that one could not take the weight of this phone and case.

The attachment to the vents is very innovative. I have a secure connect to the vent (just an mm more than a tight fit). It is meant to shake but the device is secure. This allows me to still use my vents for air flow on me while driving. That’s a blessing on a hot or cold day.

Superb add on to my vehicle. Totally recommend!

We’ve had these for about 2 mos. now. I put 1 in my Ram truck, and the other in my wife’s lil Korean veh. They both have unexpectedly good, strong magnetic adhesion; even through the knock-off brand otterbox I got from Amazon, which is not a thin phone case at all. I think maybe the folks who broke their airvent hook may have over-tightened that knob during install, which is easy to do w/ plastic stuff. It just needs to be snug. I find that I sometimes have to re-tighten the knob that holds the phone in position–every 10 days or so. I can see how the weight of the phone and the constant vibration and bumping as I drive can cause that plastic threaded connection to be jarred aloose over time.