Mounting Dream TV Mount Fixed for Most 42-70 Inch Flat Screen TVs, UL Listed TV Wall Mount Bracket up to VESA 600 x 400mm and 132 lbs – Fits 16"/18"/24" Studs – Low Profile and Space Saving MD2163-K

Yes. I mounted a 65 inch Samsung.

Hello LindseyTechGeek,

Thank you for the interest and contacting us regarding the Mounting Dream mount. We understand and we’re glad to help. Yes, the MD2163-K fits up to 24" inch wood studs which has elongated wall mounting holes which is easily fit the 20" inches wood stud spacings. … Hello LindseyTechGeek,

Thank you for the interest and contacting us regarding the Mounting Dream mount. We understand and we’re glad to help. Yes, the MD2163-K fits up to 24" inch wood studs which has elongated wall mounting holes which is easily fit the 20" inches wood stud spacings.

Thank you!

Mounting Dream Staff

Dear Gthom.
Thank you for the interest and contacting us regarding the Mounting Dream Mount. We understand and we’re glad to help. The MD2163-K fixed low profile wall mount is exactly 1.3" inches distance from the wall. Depending on the TV manufacturers input design, it may be easier to pre plug the cables prior to ha… Dear Gthom.
Thank you for the interest and contacting us regarding the Mounting Dream Mount. We understand and we’re glad to help. The MD2163-K fixed low profile wall mount is exactly 1.3" inches distance from the wall. Depending on the TV manufacturers input design, it may be easier to pre plug the cables prior to hanging and possibly add included spacers/washers to provide slightly more spacing for cable management.
If you should have any additional questions, please feel free to let us know.
Thank you!

Dear Marianne.
Thank you for the interest and contacting us regarding the Mounting Dream Mount. We understand and we’re glad to help. The OLED65B6P has a 300mm x 200mm VESA hole pattern weighing approximately 49.8 lbs. without stand which will have slight overlappings with most wall mounts due to the inputs next to th… Dear Marianne.
Thank you for the interest and contacting us regarding the Mounting Dream Mount. We understand and we’re glad to help. The OLED65B6P has a 300mm x 200mm VESA hole pattern weighing approximately 49.8 lbs. without stand which will have slight overlappings with most wall mounts due to the inputs next to the VESA holes but will be accessible. We would like to recommend the following one (1) Mounting Dream full motion mount and (2) two tilting mounts for the more perfect recommendations!
MD2298 fits up to 600mm x 400mm VESA combinations able to support up to 132 lbs. maximum weight. (Dual arm, dual stud 8" or 16" or 24")

MD2165-LK fits up to 600mm x 400mm (24" x 16" inches) VESA size able to support up to 132 lbs. (two wood studs required)

MD2268-LK fits up to 600mm x 400mm (24" x 16" inches) VESA size able to support up to 132 lbs. (two wood studs required)

We highly recommend to pre plug the inputs, use the long TV bolts with spacers/washers for additional spacing for cable management clearance.
If you should have any additional questions/concerns, please feel free to let us know anytime!
Thank you!

Yes, it comes with a variation of mount bolts that may or may not work for every TV application. I believe I needed to buy longer ones to fit my exact application. Most TV have a very limited amount that the bolt can extend into the TV

Dear Henry.
Thank you for the interest and contacting us regarding the Mounting Dream Mount. We understand and we’re glad to help. The MD2163-K is much larger than necessary for the TV up to 600mm x 400mm.
Since the ROKU TV is only 200mm x 200mm VESA size, we recommend the following wall mount perfect for this size. … Dear Henry.
Thank you for the interest and contacting us regarding the Mounting Dream Mount. We understand and we’re glad to help. The MD2163-K is much larger than necessary for the TV up to 600mm x 400mm.
Since the ROKU TV is only 200mm x 200mm VESA size, we recommend the following wall mount perfect for this size.
MD2268-S fits up to 200mm x 200mm able to support up to 44 lbs.

Please pre-plug inputs and use the washer/spacers for additional room to run the cable management.
If you should have any additional questions/concerns, please feel free to contact us again anytime!
Thank you!

No. The Mount has the TV pretty close to the wall. You cannot put a box or access inputs that are not on the sides of the TV once the TV is mounted. Inputs that are behind the TV are not accessible.

Dear P.B.
Thank you for the interest and contacting us regarding the Mounting Dream Mount. We understand and we’re glad to help. The MD2163-K "wall mount plate" dimensions are 8.75" inches in height and 25.5" inches in length. Thank you! If you should have any additional questions, please feel free to let us know anytime!

Hi there,

It comes with Lag Bolt M8x60mm (x4), M4 x 12mm Screws (x4), M4 x 30mm Screws (x4), M6 x 12mm Screws (x4), M6 x 35mm Screws (x4), M8 x 25mm Screws (x4), M8 x 45mm Screws (x4) … Hi there,

It comes with Lag Bolt M8x60mm (x4), M4 x 12mm Screws (x4), M4 x 30mm Screws (x4), M6 x 12mm Screws (x4), M6 x 35mm Screws (x4), M8 x 25mm Screws (x4), M8 x 45mm Screws (x4)

Thank you

Dear Raj,
Yes, MD2163-K fits your Samsung ks8500 65 inch flat tv, and the screws provide with the mount is good for your TV.
Thank you!

Hi there,
Thank you for contacting us.
Regret that the MD2163-K doesn’t come with holes for vesa 100x100mm. You have a check on the smaller version MD2361-K. Here it is. https://www.amazon.com/Mounting-Dream-400x400mm-Capacity-MD2361-K/dp/B00QOQU95K/ref=cm_cr_arp_d_product_top?ie=UTF8&th=1 … Hi there,
Thank you for contacting us.
Regret that the MD2163-K doesn’t come with holes for vesa 100x100mm. You have a check on the smaller version MD2361-K. Here it is. https://www.amazon.com/Mounting-Dream-400x400mm-Capacity-MD2361-K/dp/B00QOQU95K/ref=cm_cr_arp_d_product_top?ie=UTF8&th=1

Thanks

The mount is a standard flush mount. It should without any issues.

No it comes with more standard wall hardware

Dear Amm.

Thank you for the interest and contacting us regarding the Mounting Dream mount. We understand and we’re glad to help. Yes, the MD2163-K is perfectly compatible for the curved TV’s with the included TV bolts and spacer/washer combinations. … Dear Amm.

Thank you for the interest and contacting us regarding the Mounting Dream mount. We understand and we’re glad to help. Yes, the MD2163-K is perfectly compatible for the curved TV’s with the included TV bolts and spacer/washer combinations.

Thank you!

They say it will. I have a older 45 lg which is considerably heavier than the newer TVs. Even my new Samsung 65 is lighter.

Loved how easy this was to mount. I didn’t use any spacers because I wanted my LG OLED 65″ TV to be as close to the wall as possible, and it is – only comes 3″ off the wall.
Even though my studs weren’t in the exact spot where I wanted my TV, since the mount is pretty wide, I was able to mount the TV to the far side of the mount and got it exactly where I wanted it.
Also love the quick-release pulls on the mount that make it easy to take the TV off the wall.
Super-happy with the quality of this mount, especially for the price. Much less than the LG-brand mount.

This is a great mount that is very thin and easy to install. Lots of flexibility where you screw the mounting bolts, so easy to get two studs. Mounting is very easy, and once on, you can slides it horizontally until your wife is happy that it is exactly centered on whatever she wants it centered on. There are stops on the end of the mounts so the TV will not slide off, though I did not try time. (Someone should verify before it is mounted and let us know.

Don’t forget to account for the holes and wall boxes to run your HDMI cables through the wall. Buy a recessed outlet with surge protection as well.

See my pictures for true measurements.

*Tip: after you put the brackets on the TV, but before you mount, adjust the release straps to just above the lower edge of the TV. If you don’t you will be using a coat hanger to try and grab them if you ever have to release. Like I did the first time!

The best wall mount there is. Joins in the middle with a solid piece making it perfectly straight. Pull tabs make secure and removing the television a breeze. All mounting hardware is included. I’ve used many different wall mounts. Don’t ever buy one from the store. Several from Amazon and I initially bought the tilting version for my parents a couple years ago and I was so pleased with it and displeased with the one I had that I ordered this one when we remodeled. Used the old one for my niece’s room. Mounting dream is the ONLY wall mount I will ever buy.

This company is amazing.

1. Their mount is easy to install of high quality. doesn’t seem like it’ll break and is very sturdy.

2. I accidentally purchased the fixed mount when I really wanted one that could be tilted slightly. I contacted the company to see if the brackets that connect to the TV were the same on the tilting model. Was just going to buy it, install those, and pop it onto the mount on the wall. Mounting Dream responded back that, yes, they are interchangeable and then sent me a set of tilting brackets…FOR FREE. Not questions asked. What amazing customer service. I wasn’t even expecting that!

Thanks again, Mounting Dream. You have my business in the future and I’ll make sure to let anyone who is in the market, to buy your products.

Super EZ type of flush mount. I did however have to modify mine to work with my TCL 75″ 6-series TV. TV case is made for a flat 300mm x 300mm VESA plate, and the TV has a ledge just below the bottom mounts, thus the vertical mount bars would need standoffs to clear the ledge, which I did not want to use. So, a bit of TIG welding and chopping off small section of the vertical mount bars and they fit perfect. What I do not understand though is, all of the TV weight will hang from the top mounting hooks because the bottom lock-in section does not rest on the wall bracket at all. It’s not the best design from a load-distribution point of view, but it does hold TV’s very snug to the wall.

I wanted something sturdy for my garage to hang a 55″ – it is my gym. I was debating the costco version which was significantly more expensive but decided for this because of the quick shipping. I have the costco swivel heavy duty one in my living room, but it seems to always have issues leaning and was much harder to install. I am most likely going to purchase this again and put it in place of the costco one. The only con, is there is not much room if you want to through a HDMI or USB in the back on a wim. I can do it myself but it takes a lot of huffing and puffing and four-letter words with an older heavier 55″. I learned my lesson and just keep a spare HDMI plugged in the entire time. So bottom line, buy this, be happy, but just make sure everything is plugged in before putting it up on the wall.

I used this mount to hang my 75″ LG TV and it has been great. The TV is approx 80lbs and has been up for about a week with no issues. It sits extremely close to the wall, so it is very sleek. The width of the base was enough to secure it to 3 studs (there are two normal 16″ distance and a rogue extra stud about an inch past the right-most one) so I feel it is about as secure as it gets. One thing to definitely note is the strings you need to pull to disconnect the bottom latch and remove the TV are extremely short, my husband and I had to fashion a hook and stick to be able to pull them to remove the TV so we could connect additional cables. Which leads me to mention the TV is also way too close to the wall the access any of the ports. I remedied that first issue by tying off some thick cotton string to each loop and essentially lengthening them so that they are easily accessible when the TV is installed for future removal.

This definitely feels cheap, like aluminum. But it’s shockingly sturdy if installed tightly. My TV is a 65 inch heavy tv and this little thing holds it up like a champ. It’s incredible low profile for close to the wall installation. Almost to a fault because once installed, it’s nearly impossible to get to the back. Also, my TV is large and the straps are hard to get to as they are short. I suggest tying string extensions. Also do all connections prior to hanging it. The hardest part was installing the brackets to the TV. You will have a hard time of If your TV is not flat at the back. It took a long time of trial and error using different screws and spacers to get the brackets on. Also, the wood screw provided were kind of dull. Had to use higher quality one on two. These are all minor gripes considering the price. Great little buy.

Purchased this to mount my 77″ Sony OLED on the wall. The product description indicates that it can accommodate up to 70″ TV’s, but it also indicates that it can accommodate 300x300mm VESA mount pattern and withstand up to 132lbs. My Sony works with the mounting pattern, and despite being larger than 70″, it only weighs ~80lbs, so I went for it.

The only thing I can really comment on is that the TV doesn’t sit completely vertical (flush against the wall), although it’s minimal. There’s a slight downward tilt, but I actually found this to be okay with me since the TV is mounted slightly above eye-level when seating. This could also easily be remedied by placing a small block of wood or something similar between the bottom of the TV and the wall. Photo attached for visualization.

I’m really happy with this mount and would recommend it to others. Sony wanted $350 for a wall mount made for my specific TV. This mount was less than 1/10th of the cost.

This mount is nearly perfect, the only thing it lacks is some way to prevent the tv from moving sideways, there’s a low likelihood of someone pushing the tv sideways enough to slide off the wall bracket but it’s possible, and there is nothing in the directions regarding this, my other mounts have a security screw that is used to prevent sideways movement. That aside the construction quality is more than adequate.