Mounting Dream UL Listed TV Mount for Most 26-55 Inch TVs, Full Motion TV Wall Mount with Perfect Center Design on Single Stud Articulating Mount Max VESA 400x400mm up to 77 LBS, MD2413-MX

0
44
1 / 9

Mounting Dream UL Listed TV Mount for Most 26-55 Inch TVs, Full Motion TV Wall Mount with Perfect Center Design on Single Stud Articulating Mount Max VESA 400x400mm up to 77 LBS, MD2413-MX Image 1
2 / 9

Mounting Dream UL Listed TV Mount for Most 26-55 Inch TVs, Full Motion TV Wall Mount with Perfect Center Design on Single Stud Articulating Mount Max VESA 400x400mm up to 77 LBS, MD2413-MX Image 2
3 / 9

Mounting Dream UL Listed TV Mount for Most 26-55 Inch TVs, Full Motion TV Wall Mount with Perfect Center Design on Single Stud Articulating Mount Max VESA 400x400mm up to 77 LBS, MD2413-MX Image 3
4 / 9

Mounting Dream UL Listed TV Mount for Most 26-55 Inch TVs, Full Motion TV Wall Mount with Perfect Center Design on Single Stud Articulating Mount Max VESA 400x400mm up to 77 LBS, MD2413-MX Image 4
5 / 9

Mounting Dream UL Listed TV Mount for Most 26-55 Inch TVs, Full Motion TV Wall Mount with Perfect Center Design on Single Stud Articulating Mount Max VESA 400x400mm up to 77 LBS, MD2413-MX Image 5
6 / 9

Mounting Dream UL Listed TV Mount for Most 26-55 Inch TVs, Full Motion TV Wall Mount with Perfect Center Design on Single Stud Articulating Mount Max VESA 400x400mm up to 77 LBS, MD2413-MX Image 6
7 / 9

Mounting Dream UL Listed TV Mount for Most 26-55 Inch TVs, Full Motion TV Wall Mount with Perfect Center Design on Single Stud Articulating Mount Max VESA 400x400mm up to 77 LBS, MD2413-MX Image 7
8 / 9

Mounting Dream UL Listed TV Mount for Most 26-55 Inch TVs, Full Motion TV Wall Mount with Perfect Center Design on Single Stud Articulating Mount Max VESA 400x400mm up to 77 LBS, MD2413-MX Image 8
9 / 9

Mounting Dream UL Listed TV Mount for Most 26-55 Inch TVs, Full Motion TV Wall Mount with Perfect Center Design on Single Stud Articulating Mount Max VESA 400x400mm up to 77 LBS, MD2413-MX Image 9
4.7 out of 5 stars

Mounting Dream UL TV Mount for Most 26-55 Inch TVs, Full Motion TV Wall Mount Bracket with Perfect Center Design on Single Stud Articulating Mount Max VESA 400x400mm up to 77 LBS, MD2413-MXSpecifications: Fits 26″ to 55″ LED, LCD, OLED and flat panel TVs. Supports TV weight up to 77lbs. Fits VESA mounting hole patterns: 400X400/400×300/400×200/300×300/300X200/200×200/200×100/100×100/75×75 mm ( In inches: 16″X16″/16″x12″/16″x8″/12″x12″/ 12″x8″/8″x8″/8″x4″/4″x4″/3″x3″). Tilt adjusts 15 degrees forward or 5 degrees backward. Swivel up to 180 degrees. Extends up to 16.7″ and folds 2.7″ from the wall to save space. Single stud installation. Rotate ±4 degrees for perfect TV level adjustment. Package includes:TV Wall Mount, User Manual, Hardware Pack, Bubble Level, Socket WrenchSturdy TV bracket :Made of heavy-duty aluminum and steel for reliable strength. Technology of robot welding makes whole TV wall bracket unit sturdy and safe.

Facts About Mounting Dream UL Listed TV Mount for Most 26-55 Inch TVs, Full Motion TV Wall Mount with Perfect Center Design on Single Stud Articulating Mount Max VESA 400x400mm up to 77 LBS, MD2413-MX

Does it come with necessary parts and instruction to mount on a drywall without using the studs?

You must find the 2×4 wood stud behind the drywall, and mount to that area. The weight of any tv will be too much for the drywall alone, no matter what anchors or Toggle bolts you have. I used the supplied bolts and found a stud in my bedroom to mount through the dryeall into. Here’s the thing, when I mounted, the stud… You must find the 2×4 wood stud behind the drywall, and mount to that area. The weight of any tv will be too much for the drywall alone, no matter what anchors or Toggle bolts you have. I used the supplied bolts and found a stud in my bedroom to mount through the dryeall into. Here’s the thing, when I mounted, the stud was not in the center of the wall, so I have this mounted about 1-1/2′ to the right of center. This stand is holding up very well considered the offset mount.

What are the dimensions of the plate that mounts to the wall?

Mounting plate is 2.75” wide and 10” long with 3 holes for lag bolts.

can you use this as a corner mount?

Dear Frank.
Thank you for the interest and contacting us regarding the Mounting Dream Mount. We understand and we’re glad to help. The MD2413-MX must be installed onto the flat wall using the wood studs. Yes, it is possible to position the TV to the corner if this is the case but not installed directly onto a corner. … Dear Frank.
Thank you for the interest and contacting us regarding the Mounting Dream Mount. We understand and we’re glad to help. The MD2413-MX must be installed onto the flat wall using the wood studs. Yes, it is possible to position the TV to the corner if this is the case but not installed directly onto a corner.
If you should have any additional questions, please feel free to contact us again!
Thank you!

How far from the wall does the tv start when the mount is flat? Is it flush? Can it look straight ahead? Reviews always show down angle.

Dear Dena.
Thank you for the interest and contacting us regarding the Mounting Dream Mount. We understand and we’re glad to help. The MD2413-MX retracts to 2.9" inches (to wall) and extends up to 19.4" inches from the wall which is not completely flushed for cable management. Yes, you may adjust the tilting from +5°/-… Dear Dena.
Thank you for the interest and contacting us regarding the Mounting Dream Mount. We understand and we’re glad to help. The MD2413-MX retracts to 2.9" inches (to wall) and extends up to 19.4" inches from the wall which is not completely flushed for cable management. Yes, you may adjust the tilting from +5°/-15° degrees which can achieve straight ahead viewing in favor. Depending on placement of TV which is usually higher, or depending on lighting glare, which normally require slight tilting for best viewing environments.
Thank you!

Can the sound bar be mounted to this

Not really. The backing plate goes flat against the tv, right in the middle. There is no convenient spot to brace or hang a sound bar.

What are the dimensions of the bracket that attaches to the stud?

Dear Zach Fairchild.
Thank you for the interest and contacting us regarding the Mounting Dream Mount. We understand and we’re glad to help. The Wall Mount dimensions are approximately 4.25" inch wide x 10" inch tall.
If you should have any additional questions/concerns, please feel free to contact us again anytime!
… Dear Zach Fairchild.
Thank you for the interest and contacting us regarding the Mounting Dream Mount. We understand and we’re glad to help. The Wall Mount dimensions are approximately 4.25" inch wide x 10" inch tall.
If you should have any additional questions/concerns, please feel free to contact us again anytime!
Thank you!

When I order how do I request parts for installing onto a concrete wall?

Hi there,
Thank you for the interest.
You may message seller and advise us of the order ID and shipping address. The concrete anchors will be sent per request. … Hi there,
Thank you for the interest.
You may message seller and advise us of the order ID and shipping address. The concrete anchors will be sent per request.

Cheers

I believe the thickness of the drywall in front of the stud is between 1" and 1.5". Is that ok?

Actually, your drywall is most likely 1/2 inch or 5/8 inch. Even if it were a full 1” you wouldn’t have any problem installing this.

Does this work with samsung un50mu6070f?

Hi there,

Thank you for the interest and contacting us regarding to the Mounting Dream mount. We understand and we’re glad to help. We found that the Samsung UN50MU6070FXZA has a 400mm x 400mm VESA hole pattern weighing approximately 25.4 lbs. without stand which is clear of overlapping/blocked inputs. Yes, this mod… Hi there,

Thank you for the interest and contacting us regarding to the Mounting Dream mount. We understand and we’re glad to help. We found that the Samsung UN50MU6070FXZA has a 400mm x 400mm VESA hole pattern weighing approximately 25.4 lbs. without stand which is clear of overlapping/blocked inputs. Yes, this model is perfectly compatible within range with the TV specifications.
Thank you!

Does anyone know if it will fit a 32" vizio flat hdtv – model # vu32l?

Dear Chuck.
Thank you for the interest and contacting us regarding the Mounting Dream Mount. We understand and we’re glad to help. The VU32L has four threaded M6 inserts with a 400mm x 200mm (16" x 8" inch) VESA hole pattern weighing approximately 28.3 lbs. without stand which is clear of any overlapping/blocked input… Dear Chuck.
Thank you for the interest and contacting us regarding the Mounting Dream Mount. We understand and we’re glad to help. The VU32L has four threaded M6 inserts with a 400mm x 200mm (16" x 8" inch) VESA hole pattern weighing approximately 28.3 lbs. without stand which is clear of any overlapping/blocked inputs. The MD2413-MX fits up to 400mm x 400mm VESA hole combinations able to support up to 66 lbs. maximum weight which is perfectly compatible within range of the TV Specifications. Please read the instruction manual carefully, there will be a certain pattern placement for the 400mm x 200mm VESA pattern.
Thank you!

What is the difference between the old and the new model, which costs more?

Dear Richard.

Thank you for the interest and contacting us regarding the Mounting Dream mount. We understand and we’re glad to help. The old and new version MD2413-MX center TV butterfly plate has been redesigned to fit more VESA hole combinations compared to the old version. … Dear Richard.

Thank you for the interest and contacting us regarding the Mounting Dream mount. We understand and we’re glad to help. The old and new version MD2413-MX center TV butterfly plate has been redesigned to fit more VESA hole combinations compared to the old version.

Thank you!

Mounting Dream Staff

is this only for flat screens or can I use this with my Vizio Vo370m?

Hi Islem.

Thanks for your interest and contacting us regarding to Mounting Dream TV mount. … Hi Islem.

Thanks for your interest and contacting us regarding to Mounting Dream TV mount.

MD2413-MX fits up to 400*400mm VESA combinations supporting 60 lbs max loading. There are spacers and washers so that you can combine it to fit your TV.

Since we could not find any useful informations online, please help provide the following informations to [email protected]:
–TV Weight
–TV VESA
–TV Back Picture

Please feel free to contact us. Tks.

Will this work with a Panasonic tc-l32c3 TV?

I do not know that answer I used it for a 48" Samsung.

I purchased a tcl 43-inch 4k uhd smart led tv – 43s43tc my dimensions are almost he size of the wall 39"x24" would the tv be centered to the bracket?

You must buy the correct tv mount for the size of your tv. My samsung tv measures 55in diagonally so I chose the mount for that size tv. The tv was centered to the bracket.

Will this mount work on a 40 inch Samsung smart tv?

Dear Michelle.
Thank you for the interest and contacting us regarding the Mounting Dream Products. We understand and we’re glad to help. In most cases, the Mounting Dream Mount should be compatible but we’d like a little more information to confirm before purchasing.
Please help provide the following details to custo… Dear Michelle.
Thank you for the interest and contacting us regarding the Mounting Dream Products. We understand and we’re glad to help. In most cases, the Mounting Dream Mount should be compatible but we’d like a little more information to confirm before purchasing.
Please help provide the following details to [email protected]
In order to better serve you, may we have the following details:
Clear photo of TV back panel (help check power and inputs)
TV Model
TV Weight
Wood Stud Spacing (single or two studs centered?)
VESA size if known (exact measurement)
We look forward to hearing from you shortly.
Thank you!

Info About Mounting Dream UL Listed TV Mount for Most 26-55 Inch TVs, Full Motion TV Wall Mount with Perfect Center Design on Single Stud Articulating Mount Max VESA 400x400mm up to 77 LBS, MD2413-MX (Reviews From Amazon)

Fantastic!

The instructions were very clear. The assembly was very simple. Insulation overall is very easy to handle. One comment is to ensure the Tilt forward bracket is tightened when you’re putting your TV backup on the mount on the wall. This will keep the TV from slowly falling forward and potentially falling off. Also make sure you have a good stud finder so that you do not get too far to one side or the other of a 2×4 for installation.
The movement and swivel of the entire bracket is perfect and I absolutely love the security of this Mount directly into one stud vs. All across a 16 inch measurement for other brackets.
The only help I asked for was from my husband to help me put the TV on the bracket on when it was hung on the wall. I handled the installation from beginning to end by myself with that one exception. So as a woman, I recommend this bracket.

Best Buy for the Price, Solid & Smooth Action, All Hardware Included

Just installed this mount MD2414-MX this past weekend. It’s a great, solid mount and comes with all the mounting hardware that you will need for walls with wooden studs or concrete. I like the fact that they provide various options for mounting along with the necessary hardware to accomplish the task. It was plenty strong enough to mount my TCL 55" 4K TV (which is only about 30 pounds). I was impressed at how smooth the swivel and tilt action are on this unit. It’s definitely a best buy. They sell a similar one at Costco that costs more than twice the price.

Deserves 6 stars for quality and included parts. (VERY STURDY IN WALL)

*2/2018 Update…..TV STILL HANGING TIGHT! I even swapped to a 50 inch tv…no issues at all*

If I could rate this TV mount 6 stars, I would! I never had a tv mount before since it seemed like it would be a big hassle to make holes in the wall and I never quite trusted my tv hanging on a mount. I saw this mount on sale for dirt cheap compared to best buy charging $70 for a lesser quality so I decided to take a plunge! First I’d like to say that this mount kit comes with EVERYTHING YOU NEED in the box from the screws to the spacers! I’m a handy guy but I was a little intimidated looking at everything in the box but I made this mount a project for the weekend and got it INSTALLED IN UNDER 30 MINUTES (32 inch tv. through 1 1/2 thick dry wall). I did need to go buy a 1/2 drill bit to make it a clean job.

Tools you will need: Power drill, stud finder , correct drill bits to make your holes and I personally used Snap Toggle bolts since I could not drill into the thick metal studs that my condo uses.

Tips:
– If you cannot drill into your studs then use Snap Toggle bolts hold tv’s perfectly through at least an inch of drywall, use at LEAST 4 of them and you will never have issues. (new and improved 6 pack sold at Home Depot for $7…well worth it!)
– You can use the cable ties to keep the cords looking neat or you can drill through the wall to hide them (takes a few mins)
– I have included the picture of the Hillman Snap Toggle bolts if you want to try them out. I mounted a 32 inch tv that only weighed 27lbs and these bolts are rated to hold 80lbs each.

IF you have any questions, feel free to ask me.

Half the price, same great quality…

This is the second TV mount I bought this month, and is the cheaper of the two. The TV I was mounting on it was a 42" Vizio for my bedroom, so I wasn’t as concerned with the weight bearing capacity of the unit. Having just done the other one last weekend it was a breeze to mount this one on my own. Two small pilot holes to verify the stud, then a thicker bit to pre-drill where the carriage bolts were going in. The bracket itself is sturdy, and has great articulation, despite the fact that I’ll keep it pushed flush up against the wall.

Took 20 minutes to get the measurements double checked, bracket installed, TV leveled, and Netflix up on screen. Well worth the money, and honestly no huge difference between this and the $42 one I purchased. Would happily recommend this to friends.

I had to give it five starts because…

I do not like to give 5 star reviews unless there is something exceptionally outstanding about the product I am reviewing. This is really a very solid 4 star product – perhaps 4+. But I felt compelled to give it 5 stars because of all the incredibly NOT accurate 1 star reviews I saw on this product.

“I had to give it 1 star because it’s stuck with the monitor all the way up, it said it could tilt, but no matter how much force I apply it won’t tilt down” – or it’s opposite – “Installation and quality were fantastic, but I have to give it a 1 star because as soon as I put the TV on it tilts all the way down and nothing I do will prevent it from doing that – so the mount is useless to me.”

WRONG!!!!!! Go look at the video provided by the manufacturer at the top of the product page (at the top of this page). Watch the portion of the video from 11 seconds to 13 seconds over and over again to 1) see that indeed the monitor has 15degrees of tilt adjustment, and b) THERE ARE TWO SCREWS that control the movement clearly visible in the video. You have to LOOSEN the two screws a little to ADJUST the tilt, then TIGHTEN the screws again to keep the tilt angle where you want it. UGH!

Another 1 star complaint I have seen repeatedly – “the mounting holes on my Dell/LG/etc. are recessed and the plate won’t fit in the recessed area, so I can’t use this at all – complete waste of time and money.” UGH!! There are four different lengths of spacers included in the kit 4x each of 22mm. 17mm, and 10mm, plus 8 more 2.5mm spacers TO BE USED WITH RECESSED MOUNTING MONITORS – which is all clearly explained Step 1-5 “Attach TV Plate to TV Back.” When you can’t figure out how to attach the plate to the TV, where do you look? Well, I look for something in the instructions that explains how to attach the plate to the TV, but I guess I am an outlier. And, yes, I just used this mount for my brand new Dell U4919DW 49″ 32:9 Dual QHD monitor with a recessed attachment point that required me to use 1 each 17mm spacers at the attachment point. SHEESH!

Folks – this is an INCREDIBLY stable monitor mount with extremely well illustrated and easy to follow directions – if one isn’t afraid to follow them!!

I did opt to replace the M7x55 lag bolts that attach the mount to the wall with 5/16″ – 2.-1/2″ bolts I picked up at Home Depot, but that’s just because those are the largest lag bolts that will fit in the holes without modification – and M7 bolts are plenty strong enough for this mount.

Mounting Dream: Perfect name—perfect product.

This is one of the best packaged products I have experienced with any mechanical/self install item I have ever purchased. Online or in a retail store. Packaging??? He’s ecstatic about the package?? Yes, I am. Best part is the phenomenal combinations provided regarding one’s particular TV. There was no running to the garage looking for a tool or even a jury-rig part.. Everything is there. Even a small level. It was included. Mounting Dream allowed for no confusion. Allen wrenches, level bolts, washers, et al . Actually, you are left with enough spare parts and tools to setup a little installation business at home. I didn’t have to call for help until it was time to hoist the TV to slide it in the bracket. Which was a breeze, and sturdy enough to not worry one iota about future troubles. Did I mention the HDMI cord was included? Now I have.

This thing made me look like a genius installer

Okay, full confession. I’m not good with tools. I understand their purpose, I can muddle through some things, but by and large I am a check book remodeler. My wife figures out what she wants, I arrange someone with a better relationship with tools to come here to carry out her plan.

The other day my 15 year old Westinghouse 46″ flat screen, mounted above my gas fireplace gave up the ghost. I don’t know what’s wrong with it, but it wouldn’t run through it’s start up, probably a power surge got it as all the clocks in the house were flashing indicating a power outage. But it was old and it was a dumb TV and the prices of new TV’s have dropped like crazy, so happy me, I’m dumpstering the old and gonna swap in a new one.

Not so fast.

The mount that I paid $150 for and put up by guys I paid $150 to, that I could do chin-ups on was there, it looked really stout, it was a little adjustable side to side and could angle a little. Heck I don’t need a new mount, I’ve got one, easy peasy, right? Nope.

Long story short, after figuring out how to get our old TV off the mount, releasing a bottom pair of hooks and getting it to lift straight up off the top rail and almost killing ourselves my wife and I put the brackets on our new 55″ tv and prepared to hang the TV. Nope, the mount is inset into the wall because the old tv was thicker and had a bit of a bump out on the back. Getting the TV hung on the top rail finally showed the mount was not going to allow me to even reach the power cable. Took almost an hour to get that new tv off of the old rack. I hate the makers of that rack, I wish them ill.

I start reading the reviews here and run across this mount. Because the mount is inset into a cubby this looked like it would be the perfect solution.

The box arrives in 2 days ( thank you Prime) I paid like $25 for it with their coupon and when I opened the box I was amazed at how much stuff was in the box and how well set up the parts are. Each different kind was wrapped and lettered, multiple different sizes of everything, bolts, spacers, arms, everything. I pulled the mount out, very well made, seems extremely high quality and it made sense just looking at it.

Two of the previous holes in the existing board were used and the mount was up and level in like 5 minutes. The back of the new TV did not require any of the arms be added, the mount fit perfectly. Once I figured out the spacers, that was on it 5 minutes. Called my wife in to help lower the tv on to the rack, 2 minutes. Tightened the mount bolts and my TV was up and running.

This mount allows my tv to fit flush with the cubby built for my old TV and I can swing it out left or right for viewing if I’m here by myself, other wise it points straight out from the wall.

There isn’t a lot I can do with a screwdriver, socket wrench and a drill, but this is one that let me look like a TV hanging genius. These folks have done it right. Thank you.

Easy to install, works like a dream. Installation requires drill, wrench, stud finder, tape measure.

The instructions were clear, and assembly was easy. I used this to mount a 50" Toshiba Fire TV to an interior wall in my master bedroom. The bracket comes apart into two pieces, one mounts to the back of the TV, the other mounts to the wall. Mounting to interior walls requires a drill, wrench (a ratcheting socket wrench is easiest), tape measure, and stud finder. A level will make things a little easier, but a tiny level is included with the bracket or you can McGyver a solution using a plumb-line. You MUST mount the bracket to a stud (the wooden beam behind the drywall); it cannot be mounted to drywall alone. You can mount the bracket to the TV and to the wall by yourself, but you will need a helper for a minute or two to do the final step of hanging the TV on the bracket and securing it with two screws.

Once mounted, built in adjustment screws made it easy to correct small errors in level and angle the TV down so it’s easy to watch from bed.

This was about as easy as it could possibly be to assemble and mount. Once installed, the TV moves smoothly and easily. This is a great product and a tremendous value. Highly recommended!

Excellent single-stud full-range TV wall mount

This TV wall mount definitely met and exceeded my expectations. I used it to mount a 55-inch TCL 55R625 TV in the kitchen.

The advantages of this product are:

(1) It requires only a single stud, cutting the installation time by half. It also looks much, much nicer and neater than two-stud mounts.

(2) It’s full range.

(3) It’s fairly sturdy. It’s good for LED, QLED, or OLED TVs 55″ or less, weighing no more than 60 lb.

(4) It’s fairly easy to swing, pan, and rotate.

(5) Unlike two-stud mounts, it can swing 180 degrees left and right, which means you can recenter the TV offset from the mount to the left or right. This is needed when you mount in a corner, or it comes handy if you want to be able to recenter the TV to the left or right.

(6) It comes with plenty of hardware to fit all kinds of TV’s.

Disadvantages:

(1) Vertical-tilt function is a little tricky, and it is a little hard to align it perfectly vertically, as tightening the set screws tends to change the alignment. It can also slightly retilt when you swing or pan the TV.

(2) Since it’s a single-stud mount, it doesn’t support TV’s larger than 55 inches or heavier than 60 lb.

Notes:

Before you buy a mount, determine your stud locations and where your TV will be. Since this is single-stud mount, it will be centered on one of the studs. However, you can recenter it using the swing function, but this won’t be the ideal setup. A two-stud mount centers the TV between two studs, and there is no flexibility to recenter it. Note that stud locators tend to overestimate the width of the stud by about a factor of two. You absolutely must use an awl to determine the exact stud edges so that you align the mounting screws on the centers of the studs — failure to do so could result in property damage or cause injury or death to people and animals.

Great mount.

40" Vizio is on mine. It weighs nothing near 66lbs. It comes with legs to fit many types and spacers and bolts for many TV’s, but this Vizio was simple. No extra legs or spacers. Wall installation was fine, but having and extra set of hands would have made it easier. Use a drill, I predrilled slightly bigger holes than it said, they are hefty bolts. Use a 1/2" socket to drill the bolts in, don’t bother with the Phillips fitting on the front. Much more torque with the socket and you’ll probably just end up stripping the Phillips fitting out any way. But very simple if you have a drill and socket. Comes with a level and Allen wrench, HDMI cable and Velcro wraps to keep your cables together. I love it, never had a movable mount. And for the price, it’s a must have.

Video Review

Mounting Dream UL Listed TV Mount for Most 26-55 Inch TVs, Full Motion TV Wall Mount with Perfect Center Design on Single Stud Articulating Mount Max VESA 400x400mm up to 77 LBS, MD2413-MXMounting Dream UL Listed TV Mount for Most 26-55 Inch TVs, Full Motion TV Wall Mount with Perfect Center Design on Single Stud Articulating Mount Max VESA 400x400mm up to 77 LBS, MD2413-MX 4.7 View On Amazon

Leave A Reply

Please enter your comment!
Please enter your name here