Mounting Dream UL Listed TV Mount for Most 37-70 Inch TV, Universal Tilt TV Wall Mount Fit 16", 18", 24" Stud with Loading 132 lbs & Max VESA 600x400mm, Low Profile Flat Wall Mount Bracket MD2268-LK

Dear D. Thomson.

Thank you for the interest and contacting us regarding the Mounting Dream Mount. We understand and we’re glad to help. Yes, depending if the VESA hole pattern does "not" maximize the spacing on the wall bracket. If the VESA holes are 600mm horizontal which is maximized, then there is no additional … Dear D. Thomson.

Thank you for the interest and contacting us regarding the Mounting Dream Mount. We understand and we’re glad to help. Yes, depending if the VESA hole pattern does "not" maximize the spacing on the wall bracket. If the VESA holes are 600mm horizontal which is maximized, then there is no additional spacing allowed for centering.

Thank you!

The mount is rigid. A level (supplied) is required at time of installation. If a minor adjustment is required you might be able to get a 1/8th of an inch up or down by loosening the lag bolt with washer, adjusting up or down and retightening. If more adjustment is required you are going to have to start anew.

the wall mount bracket has two rectangular openings – both are 5"H x 11"W

Dear Joseph.
Thank you for the interest and contacting us regarding the Mounting Dream Mount. We understand and we’re glad to help. Yes, the MD2268-LK has a maximum tilt of 10 degrees.
Thank you!

Dear Miranda.
Thank you for the interest and contacting us regarding the Mounting Dream Mount. We understand and we’re glad to help. The MD2268-LK mounting wall plate dimension horizontal length 25~5/8" inches and vertical height 9" inches exact.
Thank you!

The latches are all metal. The system is very easy to set up and install. Instructions that can with it give many options depending upon your television.

Hi Jean,

Thanks for your interest on Mounting Dream TV wall mount. … Hi Jean,

Thanks for your interest on Mounting Dream TV wall mount.
The tilting wall mount MD2268-LK fits most of 37-70 inches TV sold today.

To better serve you, please help provide more information about your TV for us to check the compatibility, like TV full model number, mounting holes spacing/ VESA, TV weight and clear photo of TV back panel. We are available by email [email protected] 24 hours. Hear from you soon. Thank you!

Mounting Dream

Dear Van.

Thank you for the interest and contacting us regarding the Mounting Dream mount. We understand and we’re glad to help. We have confirmed that the UN55NU6900 has a 200mm x 200mm VESA hole pattern weighing approximately 38 lbs. without stand which is clear of overlapping/blocked inputs. Yes, the MD2268-LK … Dear Van.

Thank you for the interest and contacting us regarding the Mounting Dream mount. We understand and we’re glad to help. We have confirmed that the UN55NU6900 has a 200mm x 200mm VESA hole pattern weighing approximately 38 lbs. without stand which is clear of overlapping/blocked inputs. Yes, the MD2268-LK will require up to 24" inch wood studs fitting up to 600mm x 400mm VESA hole combinations able to support up to 132 lbs maximum weight which is perfectly compatible within range with the TV specifications.

The Mounting Dream package are included with the M8x50MM TV BOLTS which can be combined with (2pcs) 2.5mm spacers to achieve the M8x45mm requirement/specifications. We supply slightly longer bolts in case for soundbar mounting requirements.

Thank you!

Mounting Dream Staff

Take TV off mount when traveling

Hello Nick.

Thank you for the interest and contacting us regarding the Mounting Dream mount. We understand and we’re glad to help. Here is a standard list of hardware for wall mounting. … Hello Nick.

Thank you for the interest and contacting us regarding the Mounting Dream mount. We understand and we’re glad to help. Here is a standard list of hardware for wall mounting.

Measuring Tape, pencil, screwdriver, electric drill, socket wrench, stud finder, 5/32"(4mm) Wood Drill Bit OR 3/8"(10mm) Masonry Drill Bit for the concrete installation.

Page 1 – section 4 – installation tools
https://images-na.ssl-images-amazon.com/images/I/B1D4Sf6RoaS.pdf

Thank you!

Mounting Dream Staff

Dear Joshua.

Thank you for the interest and contacting us regarding the Mounting Dream mount. We understand and we’re glad to help. Yes, the MD2268-LK will require up to 24" inch wood studs fitting up to 600mm x 400mm VESA hole combinations able to support up to 132 lbs maximum weight which is perfectly compatible w… Dear Joshua.

Thank you for the interest and contacting us regarding the Mounting Dream mount. We understand and we’re glad to help. Yes, the MD2268-LK will require up to 24" inch wood studs fitting up to 600mm x 400mm VESA hole combinations able to support up to 132 lbs maximum weight which is perfectly compatible with the 75" inch TV size weighing approximately 80 lbs. without the stand.

Thank you!

Mounting Dream Staff

Dear Lindsay.

Thank you for the interest and contacting us regarding the Mounting Dream mount. We understand and we’re glad to help. Yes, the lag bolt size/specification for the wall is M8x60mm which will require a 1/2" inch (13mm) socket wrench to tighten into the wood studs. … Dear Lindsay.

Thank you for the interest and contacting us regarding the Mounting Dream mount. We understand and we’re glad to help. Yes, the lag bolt size/specification for the wall is M8x60mm which will require a 1/2" inch (13mm) socket wrench to tighten into the wood studs.

PAGE 4 – LAG BOLT SPECIFICATION
https://images-na.ssl-images-amazon.com/images/I/B1D4Sf6RoaS.pdf

Thank you!

Mounting Dream Staff

Hello Logan
Thank you for the interest and contacting us regarding the Mounting Dream mount. We understand and we’re glad to help.
… Hello Logan
Thank you for the interest and contacting us regarding the Mounting Dream mount. We understand and we’re glad to help.

The TV VESA pattern, the TV weight and the wood stud spacing are
three mainly factors for choosing a suitable wall mount. And the TV size is for reference only.

We found that Vizio 50-inch v-series v505-h19 has a VESA pattern 200x200mm, weighing approximately 21.51 lbs. without stand, which is clear of overlapping/ blocking possible inputs.

Yes, the MD2268-LK is perfectly compatible within range with the TV specifications

Please feel free to contact us if you have any concerns. Many thanks.

Best Regards,
Customer Service of Mounting Dream

If it’s 32”-70” and weighs 132lbs or less, like the description says, then yes it will.

I don’t know if it’s for that type of TV but it fits my 65in Samsung

A steal. For the price and quality, you get with this purchase you cant go wrong. You get the mount (obviously) a pretty decent HDMI cord and a little level. It was super easy to assemble.
The amount of screws and wedges that come with will be a little overwhelming but once you find the right screw you’re golden.
IMPORTANT: If you want some peace of mind, want to save some time, and effort, please buy some Driller Toggle Drywall Screws by Cobra to mount this. Photos attached of these. You can find these at Home Depot and I am sure online. But the wonderful thing about these is you do not have to find a stud to mount. Each screw holds 110 lbs. This is overkill but for your expensive tv, this is the peace of mind. My condo has some pretty thick metal studs and that just makes it difficult. I still recommend using a stud finder to avoid them, but these are great.

I looked at many different wall mounts and was unsure which to buy. Wall mounts for Samsung TV’s are a little more challenging because many do not come with compatible bolts. This mount does comes with bolts compatible for a series of different manufacturers including Samsung and the 8000 Series 65in 2018 model. That saved me a trip to the local hardware store. Because the back of the TV is curved I had to fiddle with the brackets to make sure they were snug and secure them with some long spacers that came with the TV and a couple thin spacers that come with the mount. Securing the brackets was the most challenging part but really not that bad. Just take your time and make sure you do it right. Securing the mount to the wall is pretty easy once you get it level. A drill and a socket set and you are good to go. Once it is in a couple studs it is very secure and that TV is not going anywhere. I also paired this mount with the PowerBridge ONE-CK Recessed In-Wall Cable Management System to hide the wires which also works great. Very happy with this mount and would buy again.

I was skeptical when I opened the box but this is a very sturdy mount. It easily handles the weight of my 75" Sony. A couple tips… it comes in two pieces. When assembling, make sure to push both sides together so they are both lined up a perfectly horizontal. When adjusting the tilt mechanism, you’ll want to use something as a gauge so both sides are tilted exactly the same. Mounting the wall mount is easy, but make sure to use a stud finder to locate the center of the studs so the lag bolts can grip securely. There’s a little room for vertical play in the mounting slots so you’ll be able to fine tune the leveling to some extent. You’ll also be able to slide your TV left and right a little to get it centered.
BTW, the package include an HDMI cable and a level. I personally wouldn’t trust either.

This wall mount is extremely strong and able to support my new Samsung 55" flat screen. I was able to screw the mount into two wall studs top and bottom, ensuring this is mounted to the wall safely and w/o any concern of it coming loose. The tilt option and the quick release pull downs are easy to use. The quick release is a great safety assurance that no one is able to accidently lift the bottom of the TV away from the wall. But should you need to do so, each release is quickly accessed by hand and because the TV is a 55" unit, it hides the release pull down ribbons very well. You’ll want to use a "real" level and not the 1" bubble level that comes with the wall mount.
Installing it was very easy, all (and more) of the screws, washers, connectors came in the package, so no need to have to run out to the hardware store due to missing parts. Instructions were written very well and easy to follow.

Very happy with the quality and build of this unit. Used it to mount my 65 inch TV… feels secure and the straps aren’t visible with such a large TV. I would not recommend relying on the level included with the kit…. mine read off and I had to re-drill and adjust using my quality level… but once up, its up and it ain’t coming down. Funny that brick and mortar stores charge 2 to 3 times the price for a unit like this. Thank you Mounting Dream, and Thank You Amazon… Hey, remember when you just basically sold books… I do; oh how far we’ve come.

Admittedly I was skeptical of this mount. I have two mounts of another more expressive brand that were both installed by a professional. The other brand cost $150.00 each and supports up 150 lbs. This significantly cheaper Mounting Dream mount features the same specs and performs just as well. This mount is very sturdy and offers quick disconnect pull straps to easily remove the TV from the mount if needed.

Attaching this mount to the wall was very easy with the aid of the included leveler. Make sure to find the studs in the wall with a stud finder. For additional peace of mind, use a magnetic stud finder in addition to the traditional one to locate the nails in the studs. There is nothing worse than discovering a metal nail in a spot where you need to screw in your last bolt.

Surprisingly, I was able to use this mount for a 32 inch Vizio TV! It fits in the center of the mount snugly but it fits! I have bought two of these mounts to hang up two TV’s in the bedrooms (the 32 inch and a 50 inch). I did the mounting and wire/wall work myself. The results came out very nice combined with this mount! If I had more rooms I would buy more of these mounts to hang TV’s on. If you’re not handing up some huge 80 inch TV, there is no need to spend $150.00 on a mount when you can buy this and get the same result!

I was nervous to mount my 70” but so glad I just went for it. The mount is extremely
Sturdy and easy to install. Do not attempt to mount your tv without finding the stud first. We followed every instruction provided, and they made it easy to install. Additionally they included an HDMI cord which I thought was really nice in case you needed one. The range of motion is not very big but you’re able to tilt the TV forward so that if you want to put it a little bit higher you can. I have a really deep couches and the kids tend to lay back so we opted to mount the TV a little bit higher. We love the Mount and we would highly recommend this purchase to anyone and it’s fairly priced. Please give this comment a thumbs up if you found it helpful.

So I have installed many and I mean many different types of TV wall mounts. These are the best and easiest TV mounts that I have installed. I have now installed 14 of these mounts. I like that they are thin and keep the TV close to the wall. They allow plenty of tilt in the TV. They came with everything needed to install (including a cute little magnetic level) :). I don’t use them but at least they come with it. I now have a bucket of these little levels if anyone needs one. So far, It has come with every bolt/bushing needed for every TV VESA setup I have used. I have used this mount for Sony, Samsung, Vizio, LG, TCL, Hisense, and yes even an Insignia. Sizes from 40 to 75 inches (Yes, I said 75″). I don’t know why the 70″ limit. The LG 75″ fits great on them. So far they have spread across all stud setups. Haven’t had a need to use a molly yet because there are so many mounting holes on the base. If I have one complaint to be nit picky… the straps on the tv vesa mounts for the latches are too long. In order to hide them after mounting a TV, you need to tie them up. Forget using the adjusting slide, it doesnt get them short enough. Before mounting the TV I have learned to use a wire tie to hold them up and then put TV on wall. I can mount a TV now in about 15-20 minutes with these mounts. But of course I’ve done few now. I would give yourself about 40-45 minutes first time.

I am very confident that anyone can mount a TV with this mount. Its that simple. 2 Screws to assemble the back plate. 4 lags to mount plate to wall. 4 bolts for TV VESA. Lift it up and put it on the bracket. Push slightly on bottom of tv till you here it click in place. Than you can slide it on the mount right or left to tweak it where you want. Done.

Ordered two of these to mount a couple of older flat screens (42 inch LG and a 42 inch Panasonic). Both of them seemed very consistently machined, but there is enough play in the slots to adjust a little bit to make up for any small differences. Once the plate was bolted to the wall the rest snapped together very easily. My only gripes about it are the adjustment for the tilt on the mount. This needs to be done without the tv being on the wall (which means if you dont like the angle you need to take the tv back off of the plate on the wall). The other issue it that there aren’t any marks on the adjustment slot so it can be tricky to get both sides the same since there are two adjustments that are independent of each other. These are minor issues especially considering the price. The mount also comes with an HDMI cable and a small level. Some people that reviewed said that they wouldn’t trust them. I compared the included level with my normal one and it’s definitely a cheap level but did its job well enough, I used it while mounting mine up just to see and got a good result. The HDMI cable is braided and looks nice but I cant speak to the quality of it. Overall for the price I would definitely reccomend it if you only need left to right and tilt adjustments

I found this TV mount well made and easy to assemble. It had everything I needed for installation (including easy to understand directions and tons of washers, screws and spacer options). The mount itself has a nice power coat finish. It is quick and easy to assemble. The kit comes with various screw sizes, spacers and washers to mount the arm brackets to your TV. I had no trouble attaching it to my 43" Vizio. I HIGHLY RECOMMEND YOU USE YOUR OWN TRUSTED LEVEL! The small levels that come with these kits are not reliable.

The most time consuming part of the whole process was marking my measurements and finding the studs. 4 sturdy lag bolts were included to mount the bracket. Once mounted, the TV is easily attached and locked on with the pull straps. Some folks don’t like that the straps hang down. You can tape them up if its a big deal but they are way easier to use than the alternative allen screw style. It takes mere seconds to hang or remove the TV. This mount is very adjustable. Besides tilt angle, you can also slide the TV left or right a few inches and you can remount the arm hangers up or down for height too. Another plus is I get to use all the leftover hardware for future home projects.