Facts About OQTIQ 3-in-1 Suction Cup Phone Holder Windshield/Dashboard/Air Vent, Dashboard & Windshield Suction Cup Car Phone Mount with Strong Sticky Gel Pad, Compatible with iPhone, Samsung & Other Cellphone
this works well for my Samsung S21+ with a think case. which measures 6.25 by 3 inches.
yes, just press the button on the back of the holder
Yes. It can support the phones up to 3.7" (wide). Please see the photos on the listing page.
Yes, work and adheres extremely well in intense heat!
Yes, I believe it does, because it doesn’t suction like other “normal” suction cups. When I stuck it wrong the first time and pulled back, I noticed the suction cup was very sticky.
Hi, the 3M dash disk pad must use when you stick the suction cup mount to the dashboard.
Yes it will but don’t use a pop it or ring on back because it makes it too thick for the arms that hold phone. I have a finger ring holder from Sulezhin (on Amazon) and it causes problems
It only works on the dash if the dash is smooth. Most are textured. They do provide a flat black oval with double sided tape to make a place on the dash. I have not tried to remove that, so have no idea if it will be easy. You can either suction cup the windshield, which should be possible in most cars without obstruct… It only works on the dash if the dash is smooth. Most are textured. They do provide a flat black oval with double sided tape to make a place on the dash. I have not tried to remove that, so have no idea if it will be easy. You can either suction cup the windshield, which should be possible in most cars without obstructing the view. Or you can use the small adaptor that came with the unit to mount it on the Heatrer/AC vent. That is a good position in my cars, so I have done that.
Yes, this car phone holder both include the dashboard phone holder and air vent cell phone holder.
It is very adjustable. I usually flip my pop socket up for a snugger fit, but when I forget it will still hold it.
Hi, the ball joint size is 17.2mm.
Hi, the suction base diameter is 2.5 inches.
There is a modest amount of adhesive on the suction cup, but my feeling is that this is only to keep the unit from sliding on a slick surface. I used it on my boat as I navigated the river from Sacramento to San Francisco, and it performed like a champ.
It has a sticky layer
I can’t guarantee it, but I’m 99 percent sure it will. I have the 7+ and it adjusts smaller and larger than that.
Info About OQTIQ 3-in-1 Suction Cup Phone Holder Windshield/Dashboard/Air Vent, Dashboard & Windshield Suction Cup Car Phone Mount with Strong Sticky Gel Pad, Compatible with iPhone, Samsung & Other Cellphone (Reviews From Amazon)
Some of the reviews complain that the suction cup is adhesive. This is sort of true, but it it designed to be removable. The cup has a sticky gel which allows to adhere even to irregular surfaces (like my textured dashboard).
But it removes without leaving any residue, and the stickiness can be restored by rinsing it in water.
This mount can stick to the windshield, dashboard, or can be attached to the flap of an air vent.
It is width- and height-adjustible, and has a notch at the base for the charging cable.
So I mounted the 3M sticky plate to my dash, and the suction cup onto the sticky plate. It worked for a while. Then the sticky plate started to peel off my dashboard.
I removed the sticky plate, and attached the suction cup directly to my dashboard. The plastic of the suction cup had somehow become VERY gummy/sticky in addition to having suction. It held much better than the sticky plate did. No problems.
One tip – when removing your phone, press the sides in to relieve pressure from the clamping gears. Then press the back release button, and then release the sides. This will help ease the mechanical stress when removing the phone and hopefully make the gears last longer.
It doesn’t get much easier. I bought this to hold my phone in my boat as I monitor my navigation app. The suction cup holds it tightly to the dash and the rubber grippers hold my phone in the mount through all conditions so far. I really like the adjustable height and the rotational mount for my phone so it doesn’t matter if I’m sitting or standing I can easily see the screen. This products performs exactly how I expected.
The lenght of the arm is perfect to reach to the edge of the dash pad in my 98 Jeep Cherokee. I used it on a 200 mile offroad excursion and it held to the windshield good, it did have a little bounce. FYI, if you are videoing put some black tape over the silver section on the arm. I got some glare in my videos before doing that.
I highly recommend this phone holder. I had on in my cup holder, but I felt like I was going to have an accident every time I looked down at it. This one fit to my left next to the A pillar of my jeep and allows me to watch the road when I am changing a Pandora station or whatever. It is also very sturdy and allowed me to fit it in a tight space and it does not move or bounce and hit my dash.
One of the best cell phone holder it suctions so great to my windshield and doesn’t move at all the part where you place your phone can be move in so many different ways to your liking and doesn’t move around when driving such a great product!
I’ve worked with 3 different holders so far ..
One was without the adhesive … Which eventually kept falling off the windshield and then stopped sticking at all.
The other one I bought had adhesive, BUT, it was to flimsy and wobbly ..
THIS ONE HOWEVER, has the best of both worlds .. It sticks really well with the adhesive AND
Its fairly solid .. I did have to tight the pivot ball nut a few times, but its good to go now.
Some people mentioned that they couldn’t get it off the windshield because of the adhesive and
though I didnt try to take mine off completely, I did pull it loose a little bit to see how solid it adhered
to the windshield. Its definitely on there pretty solid, however, I do believe that as long as the car / windshield is up there in temp. ( as in the car has been sitting in the sun in the summer ) You should be able to peel that soft plastic piece with the adhesive off the windshield.
Great product, would recommend.
This has been exactly what I’ve been looking for. I’ve purchased two other cheap ones from Walmart, and they were always falling off the window in the cold weather here in Minnesota. This one has really strong adhesion and hasn’t budged since I installed it. It hangs onto my phone extremely well and has a nice range of motion for changing the orientation of my phone when using the GPS. exactly what I was looking for!
I take care of disabled kids/adults and usually drive them around.
I thought it was a pretty good window mount for the money but it wasn’t until one of my clients pulled on it with the force of Thor that I was 100% sure it was worth every penny. When I tell you he pulled on it with the force of Thor, I mean it and that mount looked him in the eye and didn’t weaver! 👀
Good job, guys.
At first I wasn’t sure if it was going to work but I definitely do not regret it. I personally prefer the suction part to not leave anything permanent to my car and it works perfectly. It is easy to use and it’s strong on the road. You definitely don’t have to worry about it falling or moving around. Best purchase and worth the price. I recommend
|OQTIQ 3-in-1 Suction Cup Phone Holder Windshield/Dashboard/Air Vent, Dashboard & Windshield Suction Cup Car Phone Mount with Strong Sticky Gel Pad, Compatible with iPhone, Samsung & Other Cellphone||4.4||View On Amazon|