Facts About PBD WA-2608 Digital Amplified Outdoor HD TV Antenna with Mounting Pole & 40 ft RG6 Coax Cable 150 Miles Range Wireless Remote Rotation Support 2TVs
That is the cool part of this antenna. The motor is powered by the coax cable that goes from the control box to the antenna. There is no need for any other wire to control the rotor motor.
You need a splitter, which is used after the control box only. Please connect the given cable to the control box (Power Supply) directly, DO NOT use a switch or splitter between the Antenna and the Control Box. If the cable is not long enough, please send email to [email protected]
If you need to connect thro… You need a splitter, which is used after the control box only. Please connect the given cable to the control box (Power Supply) directly, DO NOT use a switch or splitter between the Antenna and the Control Box. If the cable is not long enough, please send email to [email protected]
If you need to connect through the cable outlet on the wall, please make sure there is no splitter in between the connection. You can use an F-F coupler (Splice Adapter) if you need to extend your cable or connect the cable from the antenna to the cable that built in the way.
If you have to connect splitters, please refer to “Connect the antenna to splitter”
The antenna comes complete with a mounting bracket that can be mounted to an exterior wall. It’s a simple installation, since the bracket is adjustable to any angle.
You can put an antenna indoors, but the walls, roof and any metal contained in them will reduce the signal that you receive. That is why it is generally better to mount an outdoor antenna outdoors where it receives the best signal or use an indoor antenna.
I am assuming 79549 is a zip code. This is an over the air antenna so your location is not an issue as long as you are within 100-150 miles of a local TV station broadcast tower. Part of the setup is aiming the antenna toward the strongest signal which is pretty well automated. It includes a remote controlled motor on … I am assuming 79549 is a zip code. This is an over the air antenna so your location is not an issue as long as you are within 100-150 miles of a local TV station broadcast tower. Part of the setup is aiming the antenna toward the strongest signal which is pretty well automated. It includes a remote controlled motor on the antenna so, if you you have multiple broadcast towers in different directions, you can manually aim toward the one you need.
It depends completely on where you are located and what is being broadcast over-the-air. In my area, I pick up versions of CBS, Fox, and NBC as well as local news & weather, several PBS channels, Justice TV, and a score of others. But in order to answer this for your area, you will need to get online, search for TV ant… It depends completely on where you are located and what is being broadcast over-the-air. In my area, I pick up versions of CBS, Fox, and NBC as well as local news & weather, several PBS channels, Justice TV, and a score of others. But in order to answer this for your area, you will need to get online, search for TV antenna channels in your area, and look at the signal strength you can get at your house.
It might not if you got a lot of trees around you, I live 50 miles and my works wonderful, and sometimes I get station 125 miles away
You must have older tv if doesn’t have coax connector for off the air reception. I haven’t seen one without one.
My husband and I are senior citizens and we installed it very easy. I don’t think amazon offers installation.
It will work for 2 TVs, No more according to their instructions. Yes, you can get the local channels whatever they are. In my area Fox is the strongest signal.
A mi me funciono donde vivo no se miraba con antenas indoor pero funciona bien
If cutting the cable TV, Yes one of the TV outs on the small box included with the antenna can be connected to the splitter installed by the cable/satellite company, it’s some where in your attic. If you still use their internet service the IN cable and OUT cable to the modem will need to be disconnected from the spli… If cutting the cable TV, Yes one of the TV outs on the small box included with the antenna can be connected to the splitter installed by the cable/satellite company, it’s some where in your attic. If you still use their internet service the IN cable and OUT cable to the modem will need to be disconnected from the splitter and an FF connector installed to bypass the splitter. Make sure the cable company’s cables are RG6 some older homes have RG59 cables which are to small to carry the higher digital frequencies. Should carry at least 3 TV’s depending on cable lengths, my three TV’s work OK.
I do not know if it would work for a radio. It works great for tv.
Info About PBD WA-2608 Digital Amplified Outdoor HD TV Antenna with Mounting Pole & 40 ft RG6 Coax Cable 150 Miles Range Wireless Remote Rotation Support 2TVs (Reviews From Amazon)
If you’re looking for an affordable OTA antenna, then you’ve probably seen A LOT of them over the course of your research. I went back & forth on a few, but finally pulled the trigger & went with this unit. And I’m glad I did! After using for almost one month, it has exceeded my expectations.
The unit came well packed from the vendor with all of the parts needed for the installation. You will need a few tools for the mounting portion of your install, but these will be determined by where you mount (indoors or outdoors). The manual will explain further. The documentation is OK (not great), but you will be able to complete the project from what is provided.
This kit ships with a mounting pole, 40′ RG6 coax, a rotor control (to remotely turn the antenna), a pre-amp, the antenna & mounting hardware. Some light assembly is required, but it’s very straightforward.
**There is a model of this antenna that is cheaper, but DOES NOT SHIP with a mounting pole. So make sure you select the correct version for your application.**
Also, some OTA antennas DO NOT included coax, a mounting pole or a pre-amp. These will be additional expenses on top of the purchase of your antenna. So make sure you read the details on any antenna that you consider purchasing. This model includes all of these items.
Of course, for the price, you’re not receiving a top of the line pre-amp, or for that matter high quality RG6, but for most applications it should suffice just fine. Especially if you install indoors (mine was an attic install) where it will be protected from the elements.
And for anyone wondering, the pre-amp IS powered by the rotor control box (not by the coax feed). So if you opt not to use the rotor (to turn the antenna on demand) then you will not be able to use the pre-amp.
So if you need the pre-amp, you will have to connect up the rotor control even if it won’t be used. However, if neither are needed, then they can be bypassed entirely.
Also, you can run this antenna directly into a signal booster (drop amplifier) like a PCT (PCT-VC-9U). These can be found on Amazon for around $50.00 – $100.00 depending on size & features you need. So if you already have coax jacks in your house that are in place from previous cable or satellite TV, then you can repurpose those jacks for your new antenna. This way you can distribute your antenna signal to all (or most) of the TV’s in your house!
Please note that your location, proximity to your broadcast towers, potential points of interference (trees, building, mountains, etc..) & height of your mount are a HUGE DEAL when using ANY OTA antenna.
I’m located in FL, so it’s pretty flat. However, most of the broadcast towers are 30-45 miles away. As well, the antenna was mounted indoors & at the most 15′ to 16′ in the air. So it is fairly low. However, even with an indoor installation (and not using the pre-amp) , this antenna easily picked up 57 OTA channels!
So while some people blame the antenna when they can only pick up a few stations, there are many other moving parts involved to get this all to work.
If this is your first time installing an OTA antenna, then PLEASE use a free site like “tvfool” or “antennaweb” (Google these) to determine what direction your broadcast towers are in relation to where you will be mounting your antenna. These services will also tell you what channels are going to be achievable with the antenna of your choosing. All you do is plug in your address & the site will serve up all of the info that you need. Do this BEFORE you buy any antenna to make sure it’s even worth your time.
One last thing, be sure to re-scan your channels on your TV every now & again. Channels get repacked (put under different channel assignments) & new channels get added. So if a channel that was coming in suddenly disappears, it may not be your antenna, but the broadcast signal itself.
Overall, this antenna was easy to install. Since I mounted indoors, I used two 2″ wood screws with washers right into a truss to mount the mast. The antenna goes on with 2 bolts (ratchet & socket do well here) & you’re done. I can’t personally speak to an outdoor installation, but would have to assume that it would be a bit more involved.
I shortened the included RG6 cable (only dual shield not quad shield) to around 15′ as my equipment panel was directly below the antenna in the laundry room. If you decide to do this, then you will need to crimp on a new compression connector on one end of the cable. However, you can purchase an entire kit on Amazon (with F connectors, coax stripper & the crimp tool) for under $20.00 (Bestar #3189 (Blue-F) ). It’s VERY easy. You can do it!
As well, having a shorter run can only help your signal performance. So if you have excess cable after your install, consider shortening it to the exact length that you need.
The hardest part of the install is dialing in the perfect sweet spot for your broadcast towers. The best thing you can do is use the websites noted above to get the direction of the towers BEFORE you do your install. Then bring a compass (yes, a real compass) or use a compass on your smartphone (this is what I did & it worked perfectly) to help point your antenna in the correct direction. If you have a helper, then have them scan the channels once you lock on to your desired direction. It may take a few attempts, but it’s worth it (especially if you don’t use the rotor function). Cell phones or walkie talkies do nicely here 🙂
And if you ever need it, their support was great. It’s only email based, but they responded within 24 hrs. Very willing to help & get any questions answered.
If things change, I will update this review. However, after almost a month of use, I’ve been very happy with this kit. It feels great not paying the cable company to provide stations that are otherwise floating around us for free -in uncompressed HD!
Excellent!! Got the package, assembled the antenna by hand using the enclosed directions, easy no tools needed. Powered and tested the rotation/motor of the antenna in the house, worked as expected (didn’t use the remote as I didn’t have batteries, used the dock). Grabbed my ladder and tools with additional wood screws and washers as the package only contained 2 wood screws (not enough if you ask me). Climbed on to my roof and mounted the bracket on the side of my chimney tunnel exit than mounted the assembled antenna with pole. Ran the antenna’s coaxial cable down the side of my house and used a flat coaxial jumper cable to get it through my window seal into my house as I did not want to drill through my wall. Once I plugged in a second coaxial from the window flat jumper cable inside my house to the antenna power box and a third coaxial cable from the power box to my TV, I was in business… I troubleshooted the antenna rotation using our favorite channel that used to be fuzzy and studdered until I got great reception. The great news… once our favorite channel was in perfect reception, I used the settings on my TV to auto save all viewable channels and now I have a TOTAL OF 54 CHANNELS (we live in Belton MO) that my family and I can watch!! That’s a win if you ask me. We had under 10 channels that stuttered before with our typical indoor antenna. Now to see how far it holds up and see how well it works during bad weather like rain and snow, not so sure if the material would hold up in Arizona sun but will be willing to try when we move back.
I ordered this antenna last fall. Put up in the attic. Reception during the day was Ok but when the sun went down it was sporadic. For a couple of months I communicated with engineers at local TV stations trying to improve the reception. This antenna is located in a highly wooded area wil large trees 80-100 ft tall. I forwarded the technical communication to pingbingding and sent pictures of the install.. They responded with feedback. About a month ago pingbingding asked me if I’d be willing to try a different antenna "free of charge" . I of course accepted. About a week later a different antenna arrived. I put it on a 10′ pole outside and the recepetion was great! Signal strength much stronger. The antenna is Model: #WA-2900. and I would highly recommend it if you have a weak signal with your current antenna,
pingbringding was great to work with. I had several follow-up questions via email and there response time was excellent.
I have tried many antennas, trying to get a TV station my wife wanted, and finally found it. Great antenna, easy to put together. I had a problem with the control box, but the customer service was great. I was very impress how quickly customer service answered all my questions and made sure I was happy with my purchase. I can receive 102 channels that is 2x more than all the other antennas I have tried. I even tried an antenna that cost about $200.00 bucks and this antenna is 2x better. I like that the antenna comes complete. Coax, pole. control box, remote. No extra wire is needed for the rotate function. Assembly is easy the antenna snaps together. Im a very picky guy, and do not normally give 5 stars, but this one really deserves it. I give the antenna a 5 star and the customer service was fantastic it also gets a 5 stars.
Tired of getting NO reception ? This may be for you. I live in a rural very hilly area surrounded by trees over 70 miles from any broadcaster.Could not get reception with amplified "old school" antennae. This product shipped quickly and ease of assembly was a breeze.
Now my big screen HDTV can be used to its full potential. Awesome picture quality (finally). Many channels to choose from, now. Just imagine the number of free channels available in a large city. Quit PAYING for free TV.
I just received the antenna yesterday and it took about 30 minutes to put it together. I wanted to test it to make sure everything was working so I screwed the mounting bracket to a 1″x4″x2′ piece of scrap lumber I had around. I then placed it in the middle of the room and pointed it towards where I thought the stations are located. Now my house is concrete block and has 24 solar panels on the roof above the TV room. I purchased an Amplified HD Digital TV Antenna Long 65-80 Miles Range a couple of years ago and was able to get passable reception on 12 channels. But at least once a week I would get weak signals on a couple of the channels (CBS & NBC). Then a couple of months ago I was having trouble almost every night. I use Tablo to record programs and they recommended I get a more powerful antenna.
So I hooked up my new Pingbingding (what a name) and tried it out. Worked the first time. I got all 12 channels and last night all my programs recorded without an issue. First time in a month. And this is with it sitting in the middle of the floor of TV room.
I couldn’t get the remote to rotate the antenna so I emailed them about 8pm last night ( on a Friday night from Hawaii). This morning I got an email back from them telling me to try pointing the remote at the control box. DUH! That worked. Not sure why I kept pointing it at the antenna – I guess I was watching to see if it moved. The remote used infrared to communicate to the control boxow everything is peachy. All I need to do now is get the extra coax so i can install it up on the roof and I will be a happy camper.
Mounted it today. Works great but realized the remote is worthless as you must be close to the control box and there is no feedback as to position or signal strength.
I found the solution on YouTube. I have a Samsung TV and I can set it on a station and rotate the antenna to get maximum signal strength. Samsung – menu – Support – Self Diagnois – Signal Information
Everything works great now!
5 Stars now that I can tune it
at first, after much effort at one location, would not get any stations. I was refunded my money and sent another one to try (free), and that didn’t work either. Finally I tried it about 100 feet from the prior location and BINGO! 30 channels real good. So it IS location, location, location. Thanks to their customer service!
We had a satellite service for years and payed 169.00 a month for it. Now that my husband is retiring, I was looking for ways to save money. Well let me just say, yesterday I was able to discontinue my satellite service thanks to this antenna. Now, it doesn’t get 500 channels or have all the posh services we had, but it gets 11 channels so far and may get more when we are through and that is plenty for us now. It gets all the local channels and some we didn’t get with our satellite service, and they are crystal clear. I am also buying my mom one which can save her money she is paying a cable company. I am very very happy with this antenna. 🙂
I installed this for a friend on a fixed income who was really overcharged for a cable service that uses a dish to receive the signal and transmits more ads than actual programs to the consumer. I convinced her to switch to an OTA “Over-The-Air” antenna, similar to what I have had personally for almost 25 years without a monthly cable bill. Sure, she will still receive commercials, but she will not be paying through the nose for them. She now receives better than 70 local area channels -vs- 3 from her previous provider. A very happy consumer to say the least. Some of her new received antenna channels are easily over 100 miles away.
The house is in a rural area of N.C. and the antenna network guide stated she may possibly receive only one station when using an antenna. This website was very misleading using her particular zip code. I promised no guarantee to her, but am glad it worked out in her favor. Each digital channel (e.g. Channel 2) received usually ends up being four as in 2.1, 2.2, 2.3, and 2.4. In this particular case it was 18*4 or 72 total stations from the antenna -vs- 3 actual local channels with the canceled paid provider.
The RG6 cable and connections received in this package were ultimately too short in length to mount on her roof where the best reception was ultimately provided, but a trip to the store and purchase of an additional 100ft. RG6 cable, plus a flat ghost cable to enter her home through a window was all that was needed. This added to her cost or comparatively less than 1/2 the price of a monthly bill from her cable provider.
Even with the additional 100′ of cable, the antenna rotation signal from the interior controller to the roof still delivered a
strong enough signal to rotate the antenna from indoors. The provided 40′ cable was ultimately used indoors to provide an option of relocating the TV, should a future layout change be needed. A grand total of 140′ of cable with connections was used. I do not see the need for the included remote to rotate the antenna. The powered receiver itself does the same function with one button. I doubt she will have to rotate the antenna again because all channels within the range of this antenna transmit from the South-Southeast, but she still has that option.
She and I were surprised with the great picture and sound using this antenna and signal booster. In fact, she said the picture was clearly superior to the cable reception from the dish receiver she originally used, and I agreed. She was more than happy to break her contract with the cable provider, even though they charged two months of service just to break her contract. This antenna and extras purchased will pay for itself in two months even with the cancellation fee charged to close her cable providers service.
I live in a community where you have to get approval for external antennas so I mounted this in my attic. I have no problem receiving over 50 digital channels (number includes ‘subchannels’) with great quality. The control box includes a power supply to the amplifier in the antenna and a second output which I ran to my bedroom TV. Both main and bedroom TVs seem to have the same signal quality. While in my area almost all broadcast antennas are in the same direction there are a few about 90 degrees southwest of me so having the rotation capability allows me to improve the signal when watching those channels. It would be nice to have either an indicator of relative direction or memory for a few settings, but this is not a big issue when I only have one main direction to point to most of the time.
This unit does seem to be a bit flimsy but I expect it to hold up well in the attic. I doubt it would last more than a few years exposed to the elements.
|PBD WA-2608 Digital Amplified Outdoor HD TV Antenna with Mounting Pole & 40 ft RG6 Coax Cable 150 Miles Range Wireless Remote Rotation Support 2TVs||4.3||View On Amazon|