Facts About RAM Mounts RAM-B-201U Double Socket Arm (Medium) Compatible with RAM B Size 1" Ball Components
Metallic medium length version: RAM-B-201U
Composite (plastic) medium length version: RAP-B-201U
This part needs the round ball to mount it.
No. This is for a 1” ball (25.4mm) I’m assuming that 25mm is ok but 20mm is too small.
The correct part number for this arm is RAM-B-201U-A.
You will need to get a 1" ball base mount that fits your scooter. My guess is the diameter of the mirror arms will be too small for any of the available mounting options. Unfortunately, I’m not familiar with the Vespa GT, So I can’t make any suggestions that I’m certain will work, but this may be your best bet if the m… You will need to get a 1" ball base mount that fits your scooter. My guess is the diameter of the mirror arms will be too small for any of the available mounting options. Unfortunately, I’m not familiar with the Vespa GT, So I can’t make any suggestions that I’m certain will work, but this may be your best bet if the mirror arms are at least 0.5" in diameter. You could also wrap the arm with some rubber to increase the thickness and give the u-bolt additional grip. Good luck.
It’s made of aluminium and a good product. No problem.
25mm = .98 inches and this is for a 1 inch ball so I would say yes.
THEY HAVE A SHORT & A LONG..I HAVE BOTH
The difference of the two is the other one is made by Composite ABS Plastic and the other one is made by Aluminum.
No. The longest is the ram-b-201u-c. You can use the ram-b-230u double ball connector to connect 2 different arms. As long as the arms are 1" sockets that will mate to the 1" diameter balls on the ram-b-230u
I would say probably not… I have each end attach to 1" ball and tighten slightly, there is less than 1/8" gap between to the 2 halves; so it would not be possible to attach to anything smaller than the 1" without modification.
I don’t see why not….I suppose it depends on the size of the fish finder? You would need to mount the 1” ball attachment on the back of the fish finder, it shows 3.69” to the ball centers, so you would have clearance to the center of a 6” fish finder. My two cents. I have mounted many of these to various dual sport bikes.
Yes there is. One is made from aircraft aluminum and the other is composite material which is similar to plastic. The aluminum is more heavy duty.
put a ball a a flat mount to hold the fan or mount it to a flat bracket
well this mount is made for a 1 inch ball, and there is a small amount of room left so maybe.Anyway it cheap, if it doesn’t work your only out a few buck
Info About RAM Mounts RAM-B-201U Double Socket Arm (Medium) Compatible with RAM B Size 1" Ball Components (Reviews From Amazon)
idk what i could say to convince people who already own ram mount products because you already know, but the people who have never had ram mounts, do not hesitate. its well worth the money.
note: in the pic youll see that what i have attatched to the ram mounts arm is a quadlock mount for my phone. either ram or quadlock will be great and work great, my phone is rather large and i dont want to worry about the rubber band thing snapping or moving. plus with quadlock i can get the vibration damper that will protect the camera stabilization in my phone.
I purchased a Rugged Ridge “07-10 Dash Multi-Mount with Phone Kit” for my 2009 Jeep JK which comes with a short and pretty weak phone grip. My Pixel 3a would fall out from even a pothole so not great for off-roading. The phone holder on the dash tray has a 1/4″ threaded hole on top of the attachment point so you can screw something else right on top and leave the existing phone mount in place. In my case I used the Grifiti arm to replace to upper holder and just screwed it down tight once I got my position where I wanted it so now I have both making it usable for another small device or for a passenger phone.
I purchased the “Grifiti Nootle 9 Inch Flexible Metal Black Gooseneck” and added a “RAM Double Socket Arm” and a “RAM Ball Adapter with 1/4″-20 Threaded Hole” to attach the ‘TACKFORM Motorcycle Phone Mount – 1″ Ball Connection’ which has a death grip and it puts my phone within easier view and reach.
Specific to this double ball adapter it provides a superior grip for my use case. I’ve only finger tightened it down but nothing has moved at all despite some trail rides and a lot of bouncing with a heavy phone on it. Perfect for a customized mount like I’ve described.
JK Dash Tray https://smile.amazon.com/dp/B00SV54LQU/
Grifiti arm https://smile.amazon.com/gp/product/B07KGHCSN5/
RAM dbl socket https://smile.amazon.com/gp/product/B002L9LW00/
RAM Ball https://smile.amazon.com/gp/product/B006RKF1X8/
TACKFORM grip https://smile.amazon.com/gp/product/B07DFDKNZF/
This is the metal version i bought, not the plastic version. I use it as a longer extension for the suction cup to mount small camcorder to exterior of car for moving shots. The extra length allows the camcorder’s side LCD screen to fully open when mounted on the right side of the car. The LCD screen opens from the left side of the camcorder, so the extra length allows the extra clearance for the LCD to open fully.
It took a good bit of research to find all the parts that I needed but the end result was pretty good the only thing I wasn’t expecting is that for certain RAM hardware they don’t include screws of any kind and that’s the only thing you’ll probably need to be concerned about.
I have used RAM mounting products on 4 different ATV’s, 2 Side by sides and 2 bicycles and have never had a single failure. I mount GPS units, rear view mirrors, cell phone holders, GoPro cameras and drone controllers with handlebar, roll bar and bolt-mount products. These double socket arms in different lengths are amazingly durable and easy to use. They maintain their positions despite my best efforts to slam them apart while off roading.
Don’t mess around with cheap imitations. These things are time tested and proven. I use these in my truck and mountain bike for handheld GPS and iPhone. Lock these things down and they don’t move. RAM is the only brand I’ll purchase for mounting electronics to my vehicles or bicycles.
Made from Powder Coated Marine Grade Aluminum, these arms will last a lifetime, and RAM guarantees them for life! Very strong, they hold securely to the Ram mount balls, but the nicely sized knobs make adjustments quick and easy. You cant go wrong with the RAM system.
I knew I had to find an arm piece to go with my X-Grip RAM cradle. This one fits the bill perfectly. I was confused at the higher price for this arm vs another on Amazon, but then found the difference in other reviews. This arm is made of aluminum/steel vs the cheaper one that is plastic/aluminum. The cheaper one seems to come loose or break even after multiple uses. Not this one. It is hard as a rock and super solid to boot. Probably the only down side is that there is no way of loosen this arm without both balls coming out on the ends. Would be nice to loosen one end or the other. It serves its purpose and should be the only one to consider here if you are building a RAM product.
The arm itself I really good,, however,, The description says this is 6×1.5×1.5. It’s not. It’s 3.75x 1.5x 1.5. I ordered this off of the description because I needed a longer arm. If yiu need a longer arm order the large and not the medium.
What I like most is the versatility. I added to my system this to raise the phone bracket. I use this for my phone, as well as an 8” Android for mapping off-road.
|RAM Mounts RAM-B-201U Double Socket Arm (Medium) Compatible with RAM B Size 1" Ball Components||4.8||View On Amazon|