SUMK Model 3/Y Tempered Glass Screen Protector Model 3 Model Y 15" Center Control Touchscreen Car Navigation Touch Screen Protector Tempered Glass 9H Anti-Scratch and Shock Resistant for Model 3 Screen Protector Upgrade

Mine shows only one fringe; so it’s not a terrible rainbow effect. Not a dealbreaker for me, but I can see it being so for some.

Robyn Installed it upside down. It is not a perfect square. Hence that the sticker has to be in upper left corner. 15 inch screen has never changed with Tesla till now 2022. Only Cybertruck will and Plaid S have a different sized screen.

Yes, you can trim or cut it, but it fits perfectly on the Model 3 screen.

Yes its a very thin plastic layer so it bends quite a bit. I matched the left corners and pressed it over the screen. Took about 20 minutes to push all the bubbles out

Pull it off carefully and clean the screen again and the protector then reapply

Not at all. It seems pretty high quality to me. It fits perfect, easy to put on, and packaged great.

I installed it at night, in my garage. Temp was in the 50’s (in the garage) and the install went great! Very pleased with the product.

It fit the 2020 Model 3 like a glove, but I don’t know about the 2021 model — I would check the specs and see if the screen sizes are the same.

I have a 2021 Model 3. It fits perfect. I’m assuming the 15in screen is the same for the Y

Yes it fits 2022 Tesla Model 3 perfectly.

Yes, it has fit my 2021 Model Y.

No glare or washout. Overall very happy with it.

yes it fits 2022 model

It’s deigned to for the Tesla screen. Toyota is a little different. Won’t fit perfectly

YouTube

1) Make sure you clean your screen thoroughly with the alcohol wipe(#1) then dry wipe(#2) and then the soft blue cloth, all included.
2) Do not remove the backing on the screen protector and hold it on the screen in your final desired position.
3) Place the 3 guide stickers on top(as shown in my pic) so you can free up your hands and the screen protector sits in its final position.
4) peel the screen protector backing
5) slowly let the screen protector “fall” on the screen.

You’ll have a perfectly installed screen protector with no bubbles etc whatsoever to squeeze out. Seems like an excellent and must have item for your Model 3.

My touchscreen had some scratches from improper cleaning by a detailer. I was about to purchase a name brand screen protector when I decided to search Amazon and found this one for 1/3 of the price. I am glad I decided to save my money. This is an excellent screen protector. The only flaw is the corner radiuses are about 1mm off. Not something you will notice unless you really scrutinize it. The glass surface feels much better (harder) than the original plastic screen. This is an excellent upgrade for your Model 3 and I highly recommend.

Some Notes About Installation:
The alcohol prep pad this comes with is ridiculously small. Instead, I used 91% isopropyl alcohol and two clean microfiber cloths, one wet with alcohol and one dry. I turned off the air conditioning to prevent any dust from blowing onto the screen during the process. Put the screen in Cleaning Mode.

I also used blue painters tape (instead of the stickers) along the back of the top of the screen in order to get everything lined up before peeling off the backing and adhering to the screen. Put the painters tape on and then get the screen protector lined up. When everything is perfect fold the painters tape down onto the screen protector to hold it in place. Then lift the screen protector up and peel off the backing. The bottom of the screen has a slight curve, so you will want to make sure you have the screen protector oriented correctly before you commit.

After the install, the screen was moving around randomly and I was getting phantom touches, but I held the steering wheel buttons and brake pedal down to reset and when the system rebooted there were no issues.

Model 3 Center Control Touch Screen Car Navigation Tempered Glass Screen Protector, 9H Anti-Scratch and Shock Resistant for Model 3 Screen Cover P50 P65 P80 P80D 15″

**Problem – The Tesla Model 3 screen constantly gets fingerprints on it from moisturizer. The fingerprints start causing glare and the screen would get fuzzy
**Researching for a solution: Checked out several YouTube videos and scoured Amazon for a solution, and finally decided to order one off Amazon.
**Amazon order – After researching a bit, I decided to go with Sumk Screen Protector (cost-effective, good solid user ratings from tons of users)
**Shipping and delivery – Amazon took a handful of days from order to deliver the product. The product came in beautiful sturdy packaging inside a large box.
**Contents of the package – the package contained alcohol and dry wipes, wiping cloth, 3 tab stickers, dust remover sticker and printed instructions.
**Installation – I quickly went through the printed installation instructions which is not that great. However, I saw a few YouTube videos on the installation. Just blindly follow the YouTube video instructions and you will be done with a perfect install in no time
**Ease of install – 5 minutes once you know and understand what you are doing. Most of the time is spent in cleaning the screen clean of dust and fingerprints.

TIPS:

** Wash your hands thoroughly before you begin the installation
** Sit outdoors while installation to see the minute dust particles
** Make sure the surface is dry
** Do not remove the backing until you are very sure of the placement

Bottom line: The product is easy to install and works as advertised. For the price, this is an absolute must-have for Model 3. I give it a solid 5 stars!

Item was very nicely packaged. The tempered glass was well protected for shipment yet easy to remove from the packaging. Installation was very simple, simply remove the backing, center and work out the bubbles. It took about 10 minutes to work the bubbles out by pressing on them and working them toward the edges. There was some slight mismatch in the corner radii, the protector’s corners are slithly larger radii than the screen creating a small moon sliver type gap, also I am not sure if the protector or display frame is slightly bowed, but it did not align evenly with the lower edge of the display, but it is not very noticeable. I noticed a slight bit of additional glare from the protector, but the issue is minimal with a dark interior, may be more of an issue for white interiors. The feel of the display is very nice, my finger slides easier on the surface that it did before and does not smudge. The protector can be reapplied, but I did not need to as it was pretty well centered on the first attempt. Overall I am happy with this product.

This product did not have useful installation instructions other than for cleaning, so I followed the Mr. Shield iPhone screen protector video instructions. If I can find them, so can you. I found it quick and easy to install without any dust or air bubbles. Be skeptical about the reviews that say this is plastic. The one they sent me is glass. Also, some have written that it makes rainbows with polarized sunglasses. Polarized sunglasses reduce the visibility of most flat screens like iPad, iPhone, or Tesla — WHETHER THERE IS A SCREEN PROTECTOR IN PLACE OR NOT. This fine product did not cause anomalous touches. It’s a very good product indeed. Read its negative reviews with great skepticism.

I just installed mine five minutes ago, but so far I am impressed. I will update if I have any issues.

I have a long history of unsatisfactory installations of screen protectors. For that reason, I am particularly impressed with how easily I was able to install this with no detectable levels and perfect positioning. It seems like the screen reacts perfectly to touch I just installed mine five minutes ago, but so far I am impressed. I will update if I have any issues.

I have a long history of unsatisfactory installations of screen protectors. For that reason, I am particularly impressed with how easily I was able to install this with no detectable bubbles and perfect positioning. It seems like the screen reacts perfectly to touch. So far, great purchase.

Putting this on without bubbles was effortless. It was easier than putting on an iPhone screen protector of the same type (tempered glass). It no doubt helped that our Model 3 was still new, and we hadn’t removed the from-the-dealer plastic film which was on the screen at delivery. We just peeled off the dealer’s temporary plastic film and put this on. There were no bubbles to squeeze out. No need to even clean the screen first. It looks great.

This screen protector was packaged great. No chance it will be damaged in transit unless delivery guy literally runs the whole box over with his truck. Installed super easy. Comes with glass cleaner wipes and a microfiber cloth. I ended up using my own cloth because the small one it came with was a little too small and my hang kept coming off the cloth and touching the screen while I was wiping. It fit perfectly within the draining of the screen and it’s easy to adjust if you mess up, just use the edges while handling it and don’t touch the back of the screen after you’ve removed the protective film. Little card type squeege helped remove any air bubbles.

I haven’t noticed any excess finger prints or smudges since installing it. The screen is very responsive and I haven’t noticed any type of sensitivity degradation. I actually haven’t even noticed the screen protector on it at all like I have with phone or tablet screen protectors.

Good product that worked out great for me and I’d recommend this to anyone that might be interested in covering their screen!

I have bought many screen protector for all my iphone and ipad, I have installed them many times myself and learn a little better way to install them. the review before me already give a good instruction especially the one that showed you a picture using sticker to hold the screen in right place before you peels the back and install it on screen.
This screen protect does what it does and it is a well fit, I am not sure why some review say it is not a good fit for them. Maybe they got a defect one?

I went through a couple of these screen protectors before this one. The first was cracked out of the box, the second developed fine cracking for no reason. This screen protector seems to be higher quality than others I have tried. The screen protector came carefully packaged and was easy to apply. I was able to work out the bubbles easily and surprisingly was able to lift corners and edges to work out the bubbles. I finally have an amazing install thanks to this prouct. Highly recommended! Clarity is perfect, I couldn’t not detect noticeable glare. I’m really happy with this screen protector and cant wait to see more from this company.