Suoman 3-Pack for Garmin Fenix 6 Screen Protector Tempered Glass for Garmin Fenix 6/6 Pro / 6 Sapphire / 6 Pro Solar, [Anti-Scratch] (Do Not Fit for Fenix 6S/6X)

yes, friend, it is also fit for fenix 5!

You gotta make sure that use all options that comes with product correctly. So, you must make sure your watch’s screen is super clean and alway use microfiber cloth and wet wipes that comes with product. I never had problems with sticking screen protectors on watch or phone except once that actual product had dent on screen.

Measure your face in millimeters and compare with what you ordered. I made some mistake and returned for proper size. I ordered by mm diameter.

Re earlier answers: The Fenix 6 Pro also comes in a solar charging model. In parenthesis, they said they are not referring to the largest, the X model. Also this will not fit the S model as that has a smsller diameter bezel than does the 6, 6 pro, and 6 pro solar. The only possible issue with solar is not size. It is w… Re earlier answers: The Fenix 6 Pro also comes in a solar charging model. In parenthesis, they said they are not referring to the largest, the X model. Also this will not fit the S model as that has a smsller diameter bezel than does the 6, 6 pro, and 6 pro solar. The only possible issue with solar is not size. It is whether or not it diminishes the rate of solar charging. There is advisor question about this but no one who answered that, actually answered, address this issue. Anyone know the answer?

As close as I can tell it’s 37mm. Whatever device you have the seller should tell you if it fits or not. I have the Fenix 6 pro and it’s fits perfectly.

I’m slightly guessing here, but I think it would NOT interfere with the solar charging. It’s clear and doesn’t claim to reflect UV light in any way– it’s just hard as S! So it’s probably worth a few bucks to buy and try- bc you’d be able to tell if your solar isn’t charging – then just take it off or return.

No, the sapphire glass itself is scratch resistant. However, it’s like you’re brand new phone…do you put a screen protector on it or not? Same method applies here.

Yes, Quatix 6 and Fenix 6 are physically the same watch, from what I understand. Basically they just have different apps.

There is a slight gap. Not perfect but we’ll worth it

It fits perfect and you can’t even tell it’s on the watch. It does not go above the bezel

The case is 47mm but the face is roughly 35.5 mm or 1.4”. Yes for 6 but not 6X

I think it is Not fit for fenix 3 hr, friend.

This does not fit the Garmin Fenix 7 version

dear friend, you can use your finger to remove, or use credit card.

Mine was fine fenix 6x

Just slightly smaller than the the whole face, but seems to make it easier to install and remove. It does come even with the bezel so it comes in contact with more stuff if you hit the phone against objects and therfore gets scratches more likely than the original. I am fine with this as the point is that it takes the abuse and not the glass on the expensive watch. I forget I have it on the watch and no one else has noticed it at all. I found firing it in before you try to stick on gives you a good idea how much space will be on all sides so you can center it when you install it.

I’ll admit; I usually buy screen protectors for my electronics but I’m quite gentle on them and never had a problem. So, out of habit, I bought and installed this about a year ago when I bought my Garmin Fenix 6.

Installation was easy but I’ll also admit that I usually rush installing this, so I had a small pocket of air in my watch this entire time. Even with plenty of time in salt water, this caused minimal disruption to its functionality.

Alas, after numerous hikes (600 miles last year), canoe paddling practice (2-3 times a week in the ocean), it was hitting my wrist against the steel part of a squat rack that caused this small crack. I was immediately annoyed when flakes of glass came off to the floor; my watch was broken and it completely ruined the rest of the morning… until…

I got home, I took off this screen protector, and the screen to my watch was completely intact!! This truly made me a believer; remembering that it came with more than one protector, I immediately put a new one on; I still have one more of these protectors left just in case!

So, as of about 11:06 AM this morning, I am truly a believer in this product (and tempered-glass screen protectors in general.)

It’s a screen protector. Not rocket science. Simple adhesive based glass. Clean your og glass, peel back protective layer on protector and place on your watch. Easy, right?

I put mine on just a hair off center. My fingernail can fit between the glass and metal edge on one side. I only notice if I stare at it, and why would I do that?

Glass does sit below the top edge of the raised screw areas on the Fenix 6 which is nice. It’s crystal clear. Only way I know it’s on is if I stare at the 2 o’clock area where I can see that nail width gap.

So it does the trick and I have two more for if/when it sacrifice’s itself to save the watch’s glass. Money well spent.

Updated review: Updated to five stars as I’ve had the same protector on my device for 6+ months and no issues with chipping or peeling. The second photo highlights the wear and scratches on the bezel, just to show that I don’t baby this watch and the protectors have no issues handling it. Figured out that the first protector broke when I was shaking water off the watch and the metal clasp hit the protector. No damage to the face under the protector. Excellent product!

Fit my Fenix 6 Sapphire perfectly and didn’t change screen visibility. Just got it installed a few days ago so longevity is still unknown, hence the four stars.

The installation process is straightforward; there’s almost nothing to do – remove the protection film and drop the protection glass onto the watch; everything else happens by itself, even pressure is not required. The protection glass is crystal-clear and not visible on the watch when installed.

I was out on some rocks and I slammed the face of my garmin fenix against a rock so freaking hard, I thought there was no way the face survived. Luckily I had put on this protector and the only the glass protector broke! Easily swapped it out for a new one and avoided the hassle of getting the actual watch face repaired. If out of warranty, that means 50% of the cost of the watch and they replace the whole thing because I hear they wont replace just the crystal face.

I bought these protective screens, even though I have the Garmin 6 Pro with a Sapphire Crystal — just for a little added protection. It was incredibly easy to install, no issues, no bubbles and once on, I can’t even see it (which is the point). Just gives me a little more security against a nick or scratch (even Sapphire could scratch on a granite rock)—- this is a must to protect your Garmin investment!

This protective covering for the Garmin Fenix 6 Pro Standard Edition has saved my watch face multiple times. Think of this as a sacrificial lens that will keep the standard (non sapphire or solar editions) watch face from cracking. Easy to install with various location stickers and if you mess up, you can easily adjust the lens. Highly recommend!

I initially had doubts about installing this without bubbles. However, it is very easy to install properly and without bubbles. It s also very easy to remove and reposition is necessary without damaging the adhesive. The item comes with everything you need. 3 protectors, 3 alcohol swabs, 3 cleaning cloths and 3 stickers for positioning and dust removal. This is a very well thought out kit and worked well on my Fenix 6

I have a small chip currently from rock climbing (usually brutal on watch screens), but no scratching. I also bring the watch with protector often surfing, and have had no issues with the screen degrading or getting water under surface after about a month or so of use. Effective and great product.