SUUSON Phone Holder for car -3in1 Long arm car Phone Holder Mount, Suitable for car Dashboard/Windshield/Vent, car Adjustable Phone Holder, Compatible with All Smart Phones and Cars

The 360 degrees ball joint and the adjustable telescopic arm make you able to adjust your phone to any angles and any places. It holds your phone right there in front of you at your desired angle. You can use this mobile phone holder for car vertically or horizontally either, extremely flexible. That is convenient to n… The 360 degrees ball joint and the adjustable telescopic arm make you able to adjust your phone to any angles and any places. It holds your phone right there in front of you at your desired angle. You can use this mobile phone holder for car vertically or horizontally either, extremely flexible. That is convenient to navigate, pick up phone calls. It holds super steady even on bad roads. You can focus on your drive

Yes, it holds the phone firmly and doesn’t wobble, I love it! ! !

Of course

this is a phone holder (what air outlet)

Yes, in fact, it can be installed in 4 ways, 1. Windshield 2. Dashboard 3. Air vents 4. Any smooth table, use it in any way you like

Yes, it will not affect your driving, you can drive while charging.

Here are the steps:
a) Choose a location and clean the dash surface thoroughly.
b) Remove the paper cover from the 3M pad. … Here are the steps:
a) Choose a location and clean the dash surface thoroughly.
b) Remove the paper cover from the 3M pad.
c) Stick the pad to the cleaned surface. Rub it firmly for over 1min.
d) According to the test, please let it sit for 24hrs to ensure strong suction.
e) Remove the protective film. And attach the suction cup onto it.
Please NOTE:
1) 3M pad is for One-Time use. Please think twice about the location.
2) NOT recommend for Soft, Curved, Bumpy, Leather, Wood, Plush fabrics or Filmed Glass surfaces. In such case, please install on the windshield or air vent instead.
Please contact us via Amazon if you have any problems.

Yes

Yes, I’ve tried both and it works for me, it’s great, I can use it any way I want, but I think it’s more convenient to use on the windshield, and I’ve been using it that way.

I mounted it straight on my dashboard. I think the 3M is included in case the surface of the dashboard isn’t cooperative. I’ve had it in my car for about a month and it’s sticking well.

Yes, it comes with a spacer, it is made of 3M material, it can make your car phone holder better fixed on your dashboard, but you need to find an angle that suits you, because it is fixed. of

Yes, there are two auctions…
1 with adhesive & 1 wihtout adhesive

This can withstand 176-200°F, so you don’t have to worry about melting in summer

Well I strongly recommend take a measurement this product then you have to know where you wanna fit it you can set this by the ventilation windows , the dashboard or by the windshield, by the windshield you can be at risk of breaking up with this and any other product. Up to you be smart. I installed by the dashboard … Well I strongly recommend take a measurement this product then you have to know where you wanna fit it you can set this by the ventilation windows , the dashboard or by the windshield, by the windshield you can be at risk of breaking up with this and any other product. Up to you be smart. I installed by the dashboard and ventilation windows

There are two ways to solve
1). You can remove the device and wash the suction cup then reuse it again.
When cleaning the suction cup, please wash the gel pad cup with warm water, and let it be air dry. If it still doesn’t clean, you can apply a neutral soap to the bottom of the suction cup and continue washing with … There are two ways to solve
1). You can remove the device and wash the suction cup then reuse it again.
When cleaning the suction cup, please wash the gel pad cup with warm water, and let it be air dry. If it still doesn’t clean, you can apply a neutral soap to the bottom of the suction cup and continue washing with warm water, let dry and clean your windshield before putting it back on.

2). We provide 1-year hassle-free service and lifetime support. If for any reason on our product is not satisfying, please let us know, we will solve for you within 24 hours, and provide a prompt solution for you-full refund/replacement.

This is a really nice, high quality phone holder for the car. Considering the selling price of comparable models from other brands, this is a really stellar all-around value.

The things in particular that I like about this model:
1) Flexible fit for large variety of aspect ratios/sizes of phones
2) Really soft, quality padding on the bottom and sides to cushion your phone and avoid scrapes/scratches
3) Soft, gradual release of grip by using a single control that allows you to just open up the grip enough to get your phone out without having to open it all the way

The plastic quality you can tell is nice quality and should last. Once you adjust the arm and angles to get the holder the way you want it, you can tighten the adjustment controls tight enough that your phone is held firm and there won’t be sagging or slipping from where you set it.

I first purchased a cheaper phone holder as I figured all phone holders would be similar. But that was unusable – cheap plastic, non-existent hold at your adjust position, and just a totally frustrating experience. This is something you’ll use every day, probably multiple times per day. It’s worth it to get a high quality product that just does what you need versus saving a few dollars and get something that’s going to frustrate you every time you try and use it.

I’m really glad I purchased this particular phone holder. While you can definitely spend more, I don’t think you’ll get any additional functionality or any higher quality. This is really a great sweet spot considering price, flexibility, quality, and user friendliness. Highly recommended.

I use Google Maps as a navigational tool when driving in larger, fast growing cities & areas here in Texas. My GPS can’t keep up with the ever changing urbanization. This phone holder is great! Powerful suction onto my windshield made it hold my new Galaxy S22 safe & secure. Didn’t even wobble on some pretty rough construction areas we drove through. Adjustable so that it easily puts our phones within my husband’s & my reach depending on whose driving. Easy adjustment with just the turn of a knob. I can’t speak to the adhesive disc supplied should you choose to mount it on the dash. Given the suction mount for the windshield’s strength, I would imagine the adhesive mount would be just as strong. It’s also a good way to answer calls using our wireless earbuds. No more fumbling for the phone by my husband when we are in my vehicle w/o integrated coms. All in all, this is a great mount for your phone. Again, holds our Galaxy S22s with no problems. Solid as a rock. I would highly recommend this mount.

This phone mount gives so many options which I needed in my prius. The suction works better than I thought so it adheres to my windshield and hangs down exactly where I need it and does not block my windshield or any part of my dashboard. It swivels, lowers, and rotates so that you can place it wherever it works for you. It even came with a round sticky adhesive that would make it even more secure, however mine is staying in place without it. It also expands to hold my phone in its thick otter box cover. I waited several weeks to make sure I was able to give an honest review and I am extremely happy to say I it!! I’ve been trying to find one that just works… this one not only works it is exceeding all of my needs. I may order a second for my husband. You will not be disappointed!

I bought this to hold my phone especially while using navigation apps so that I don’t have to keep picking up my phone to look at it. It also comes in handy for using music apps, etc. I was concerned that the suction wouldn’t hold to my dashboard because it is not perfectly smooth, but it seems very strong and I didn’t have to use the adhesive disk that came with it. I was able to position it so that it holds my phone where it is low enough but does not block the air vent or radio display screen. It is fairly easy to take the phone in and out, and seems to grip my Samsung S21 tightly with no movement.

It holds my Note 9 (with UAG case) just fine. When adjusted properly, I can still access the fingerprint scanner on the back of the phone in order to unlock it. Use it in my wife’s jeep Wrangler and it keeps the phone where it is easily visible. The adhesion to the window seems strong. The only thing I do not care for (which is one of the reasons I bought it) is that when extended, it seems to bounce around too much. Works in the Wrangler (use the dash for support), but will not work in my Silverado due to the window being too far away and having nothing to support the holder when fully extended. Not a deal breaker though.

I was recently on a trip in Europe and had a rental car without a screen to display maps. I was able to use my phone, but didn’t have a mount to hold it which made it inconvenient. When I got home I looked for a car mount that I could use in various positions and also be able to put in a rental car (and later remove). After some searching, I came upon this car mount and really LOVE it. I can use on the dash, windshield or vent and it has a flexible arm so that I can get it in the best position to see while driving. This mount is well made with strong suction for either dash or windshield and also a vent clip. It holds the phone securely and can be used with multiple sized phones. I would definitely recommend this car phone holder.

I like putting my phone someplace visible while using it for navigation–and had quasi-successfully used a tripod built into my phone case to set the phone on the dash or console or somewhere. But, of course, it was never really secure. Take a corner too hard or need to hit the brakes hard and the phone skittered all over.

Enter the Suuson Phone Holder. I don’t know why I waited. It mounts easily (I’m using the suction cup on a flat portion of the dash). It holds securely (I mean, really securely–it ain’t goin’ anywhere). And it puts my phone where I can see it, leaving it easy to see, easy to make navigation changes on the fly, and easy to remove when I arrive at my destination. All for less than a cheap date at the local fast food drive thru.

Really … I’m not often just plain satisfied with everything about a product, but I am here. This is the one you want.

This is a great phone holder for the car. I mount this to my windshield, and the suction cup contain adhesive, and has great suction power, so much so, that it takes a little force to get it off. I haven’t tried mounting on the dashboard, but I never mount it that way anyways. The holder also holds the phone very stably. My car has a little bit of a vibration, and my previous holder would transfer the vibrations to the phone, making it hard sometimes to read the screen. This holder, does not transfer any of the vibrations. The included vent holder looks like it is for only a certain type of vent; it didn’t really work with the ones on my car, but then again…I got this holder for the suction mount, and not for the vent mount. One last thing to note, the base does not independently rotate, so if you mount the holder slightly off from what you wanted, you have to remove it, and try again. That would be the only thing I would improve is for the suction base to independently rotate, or for the base of the arm to be able to rotate.

I bought this for the vent clip; my car doesn’t have any flat areas on the dash for the suction mount, and the window design puts the phone in an awkward position. The last phone mount I had with a vent clip kept falling off at the worst times due to the design of the vent clamp not being able to grip enough of the vent strip to hold. This phone holder clip uses a hook that catches the back of the vent strip and it’s much more secure. The phone holder does rotate a bit, because the front brace is not fixed to anything, but it’s not a game changer. It is easy to put the phone in the holder and close the grips; you do have to hold the little button down behind the phone to release the grips – it would be easier if the button was a little longer.

It’s perfect for our needs. We had to stick it to the dashboard because our AC vents are too large. If you’re sticking it to the dashboard, make sure you do it right. I did it wrong the first time. I even put it on backwards. Once I redid it the right way, it’s very sturdy and works perfectly. I like that I can readjust it for my phone or my wifes phone which is an inch larger than mine. It’s great for my phone when using the map gps. When I get a call in my jeep, which is connected to uconnect, I can get a visual of who’s calling.