Facts About Syncwire Cell Phone Ring Holder Stand, 360 Degree Rotation Finger Ring Kickstand with Polished Metal Phone Grip for Magnetic Car Mount Compatible with iPhone, Samsung,LG,Pixel, Smartphone Accessories
I have really thought about this answer and I think the best way to explain this is to call up all of my high school math classes people said I would never use in life as an adult. You see, the 1 pack contains a single element thus making it a 1 pack. If you double that,then it becomes a 2 pack and therefore there ar… I have really thought about this answer and I think the best way to explain this is to call up all of my high school math classes people said I would never use in life as an adult. You see, the 1 pack contains a single element thus making it a 1 pack. If you double that,then it becomes a 2 pack and therefore there are two items. I hope this helps you in your decision.
Do not use this with a wireless charger — it gets VERY hot very fast.
Yes I would think so
I am not sure about a silicone case using the tape that comes with it. I used my own tape that holds up to ten pound pictures and such and it has worked perfectly. The tape that came with it didn’t work for my iPhone ten which is glass. Hope this helps.
There is no magnet in this, as the visual description clearly indicates. It provides a metal surface to stick to a magnet. You will have to provide the magnet.
I am not sure what you are removing but here are two things I do know. If you want to remove it from the phone, use a credit card or something like that to slip under the part stuck on the phone. If you want to remove the adhesive, I would try acetone or fingernail polish remover. I hop this helps.
Metallic, Reflective, Midnight Black with a Gunmetal Black branding at it’s center.
Cause it’s provocative, and it gets the people going.
35mm diameter ring which sticks out about 3mm.
It is just metal with sticky stuff…. hold really well. I love this thing lots of versatility in how phone is held… very sturdy.
The ring itself is polished really well. However, I did notice that the base of the ring that sticks to the surface has a sharp edge. I had to sand mine slightly because I felt like I could cut myself with it while holding the phone and ring.
Yes this product comes with 3M tape so it sticks to really anything
Yes. Just make sure u center it right. It’s very hard to remove. But it’s a great thing to have
Roughly 35mm or 1 3/8 inches
It probably could However it would probably damage the case if you ever wanted to remove it. There is some pretty strong adhesive on it for sure.
Info About Syncwire Cell Phone Ring Holder Stand, 360 Degree Rotation Finger Ring Kickstand with Polished Metal Phone Grip for Magnetic Car Mount Compatible with iPhone, Samsung,LG,Pixel, Smartphone Accessories (Reviews From Amazon)
This is my first ring holder. I was using the elastic band at first. I was skeptical about this ring but I am liking it so far. It’s durable, feels strong and it was easy to install. I hope it last. I’ll update this review after about a month or so and let you all know how it goes. It only fits one finger for me being a guy 5’11 and 175llbs but the support of the ring between the fingers make the position I placed it ideal for holding and typing also for sitting the phone at the highest position possible for viewing videos.
– Update March 18, 2020
My ring is still the same as when I installed it. I haven’t had any loose adhesive. The ring is still durable and not flimsy due to normal usage.
– Update 2-3-22
Guys I bought another one because I upgraded to a new phone, got a new case and wanted a ring that wasn’t scratched up from usage. The first one is still durable and not flimsy at all. In fact the ring is still on my old case and I have had ZERO problems out of it.
The media could not be loaded. Great strong device. It feels very sturdy and re-assuring that it comes with 3M glue. So I can have confidence it will stay in place when only the glue is stopping it fall on the floor.
Great for phones like my XR, because even with a big hand it’s impossible to hold securely and use it with just one hand, but now with this it’s easy to use one handed.
A good thickness ring so it feels comfortable on the finger, and full 365’ turn allows for use at any angle and also set up the ring to hold the phone at an angle on a table And won’t fall over. Great for watching Netflix or something like that on the plane or a train.
1 day delivery better than waiting weeks for one from China!
I bought 2 of these, so my husband and I could both have one. They stick on well. They are very sturdy with strong magnets that attach perfectly to our phone mounts. We both really appreciate how flat and sleek they are against our phones because they don’t get hung on our pockets or the lining of my purse. The 360 rotation works great without compromising the kickstand function over time unlike other styles of ring holders I’ve tried in the past. My only minor complaint is that I have small fingers, so I don’t feel this design allows me to grip my phone as securely because of the size of the ring. My husband doesn’t have that issue haha! Overall, awesome product! We are 2 happy customers.
Sticks well, sturdy and simply a great addition to my phone. It definitely gives me something to anchor the phone to my hand, but also provides numerous ways to mount it in different situations. I purposely marked the balance center of the back (balanced the phone sideways on an edge) so when I hang the loop on something to watch videos the phone doesn’t tilt either way. The loop swivels so I can also use it as a tabletop mount. The swivel is tight and does not collapse under the weight of the phone or constant use. I’ve hung it on hooks while I follow an instructional video, and it helps to steady the phone while taking pictures. I am really pleased.
Product arrived as scheduled. Have used it for about a month. Sticks very firmly to my cellphone case. Product itself is well made- very sturdy and seems durable, unlike most rings I’d used that fell apart after a while. I also like that it’s magnetic and ring turns 360 degree. Highly recommend. Will purchase again without hesitation.
Using this on a Sony Xperia XZ1, which has a smooth metal alloy chassis. I tried two other ring holders. The famoudly super thin one was simply impractical, uncomfortable and it breaks easily, precisely because it is so thin.
This one from Syncwire is perfect. It adheres extremely well. And it’s includes additional 3M stick pads in case you ever want to move it or remove it (to put it on another phone). It also comes with an alcohol prep pad.
As I said, I ordered ring holders from two other manufacturers before getting this one. The packaging alone told me that Syncwire really cares about their product. It cost the same as the others, but you would think it costs three times as much as soon as you receive it. First of all, it didn’t come in some cheap pouch with a sticker slapped on it, as if someone grabbed it from a bulk package. Nope. The Syncwire comes in proper package/box. It includes instructions in mult languages, as well as detailed warranty and contact information in case you have any questions or concerns.
I’ve only had it for a relatively short time, but for a year I have had a case on another phone with a built-in ring and this looks to be every bit as long lasting and sturdy. The joints are nice and tight, but not difficult to move.
Above I noted one of the two others I purchased. Well, the second one also worked quite well. But it was asymmetrical. And it really bothered me to look at it on my phone. It looked like I put it in the wrong spot or I put it on crooked. But this one from Syncwire is a nice perfect circle. And you may not think it’s a big deal, until you had one that wasn’t.
I highly recommend the Syncwire ring.
How did I live this long without this product?! This simple little ring has completely changed the functionality of my new iPhone. I love the new phone, it has a huge screen, it has amazing cameras, and so much more. The main issue is that it’s physically huge! It’s massive and quite difficult to use with one hand. It’s easy to hold but when it comes to typing with your thumb on one hand there’s a very real risky feeling that the thing is going to slip from your hand.
My wife has one of those pop things on her iPhone X case and she sort of likes it. She likes it because it makes it more secure in her hand but she doesn’t like that it’s plastic and not really confidence inspiring when holding it. Once she put my much larger phone in her hand and used this ring she said “order me one now”. Seriously, it’s that good.
The back of the ring comes with a 3M adhesive circle and says to wipe clean the phone or case (and it comes with an alcohol pad which is nice) and then peel off the sticky backing and hold for 10 seconds. Well, as you can see from the picture I did more than hold it for 10 seconds. I used a vice grip to hold that sucker on there for a few minutes as tight as I could squeeze that thing. Is that overkill? Maybe, but I wanted to be sure that if this thing ever lost its hold on the phone it wouldn’t be for any mistake that I made.
I love that this is made of a hard metal and not plastic. As I mentioned before that is one big plus that my wife loved instantly. It really feels solid and sturdy. The ring itself rotates endlessly 360º around the base that sticks to the case allowing you to hold the phone in either hand however best feels comfortable. It’s important to note that the ring does not “spin” as in fast. There is some tension behind the ring so you actually have to raise the ring at a 90º angle to the phone and gently rotate the ring gently so as not to rip the dang thing off the phone/case. I don’t know if that would happen – I’m not disparaging the 3M sticky – I just don’t want to test it and find out. But again, it doesn’t just spin around the base like some spinner toy, you actually have to position it where you want it and it stays firm.
When the ring folds down it is only very slightly more thick than the extrusion that goes around the camera housing portion of my particular case. Of course all cases very so keep that in mind. I have an extremely minimalist and thin hard case that is more form over function but still keeps the case secure and allowed for a very good adhesive surface for the 3M sticky.
When the ring is extended it can be used as a kickstand for the phone itself as you can see from some of the pictures. Of course I had the phone out of the case to take the pictures but rest assured that it functions flawlessly with the phone in the case as well. I installed my ring a little south of center on the phone as that felt more comfortable in my hand to use. Even at this slightly lowered location it functions beautifully as a kick stand for the phone.
Seriously, there is truly nothing I don’t like about this ring. I hope that the 3M sticky pad holds firm for a long long time because this is the best thing I’ve bought in a long time. Well, best two thing since my wife demanded I buy her the rose gold version for her phone now too!
Just buy this! You won’t regret it.
I’m so happy to have found this. I didn’t want a bulky pop socket or bulky case with a kick stand – which most are only good for propping the phone in landscape mode. I stuck this one onto the (clear thin) silicon case at the top of the bottom third of the phone (along the vertical mid line). Here are the benefits of this:
1. I can stand the phone in portrait mode
2. Rotating the ring around allows me to put the phone in landscape mode if i wanted to.
3. The ring angle can be adjusted to vary the tilt of the phone too.
4. I can use the ring with one finger through it in any direction depending on what I’m doing.. This is especially handy when taking selfies, or sometimes operating the phone with one hand and reducing the risk of it slipping out of my hand.
5. Much lower profile than a pop socket.
6. After two months of use, the ring remains extremely sturdy.
7. The metallic material sticks very well to the Syncwire magnetic mounts.
One obvious point to note is that it doesn’t sit flat in conventional phone holders – eg. the one on my bicycle, or clamp type car phone holders. As a result, the phone may not be held firmly in place. This “con” is far outweighed by the pros listed above.
My Syncwire phone holder ring arrived yesterday and I am so glad I ordered it! First of all, I love the shiny black color! I think it’s very classy-looking on my new phone case. Application was quick and simple; everything I needed was included in the box: cleansing wipe, adhesive circles (with two extras), and instructions (not really necessary but they were in there) as well as a warranty card with information on registering your product. You’ll need to refer to your Amazon order info in order to complete the registration but it only takes a few minutes. This ring won’t be going anywhere anytime soon! It is securely attached to my phone until or unless I choose to remove it. The ring itself is of decent size. Someone with extremely small fingers may have a lot of room to spare but someone with fingers on the larger size should have plenty of room. Someone with average size fingers like me should find it’s just right. One of the reasons I chose this ring was because of the factory testing the manufacturer does to ensure the ring won’t flop around unnecessarily yet be easy to maneuver 360° around the center. They definitely backed up that claim. This makes the ring usable in a variety of positions and it works very nicely as a stand in either portrait or landscape mode. I feel safe carrying my phone at my side; I slip any finger through the ring and use it as a handle. As I said earlier I’ve only had it for a couple of days and I will update this review if necessary but somehow I don’t think I’ll need to. Five stars, two thumbs up, definitely recommended.
I was browsing through my Amazon purchase history for unrelated reasons, and happened across this item. It’s April 17th, 2021, and I bought this April 7th, 2020. It’s been on my phone every day, and I’ve used it the whole year. I actually dropped and broke the back glass of my phone, removed this, and attached it to a case. The adhesive is still good. The black coating has slightly worn at the edges, but only a little. The one thing is, it’s a little bit looser now, so I have to be careful about which direction the ring faces to use it as a kick stand. Otherwise it’s just as good as when I bought it.
I’ve purchased literally at least a dozen similar phone finger ring stand products over the last few years, even starting with those “fidget spinner” phone rings when those first came out. Most of these things last 1-3 months and then break. The ones with this “flat” sort of design are by far the best, generally lasting longer, and being less bulky. Plus, they work with magnetic phone mounts very well.
This specific one has lasted way longer than any other phone ring I’ve ever used, and I’m very impressed.
|Syncwire Cell Phone Ring Holder Stand, 360 Degree Rotation Finger Ring Kickstand with Polished Metal Phone Grip for Magnetic Car Mount Compatible with iPhone, Samsung,LG,Pixel, Smartphone Accessories||4.4||View On Amazon|
Leave a Reply