Tilt TV Wall Mount Bracket Low Profile for Most 23-55 Inch LED LCD OLED Plasma Flat Curved Screen TVs, 8 Degrees Tilting for Anti-Glaring, Max VESA 400x400mm and Holds up to 99lbs by Pipishell

0
36
1 / 7

Tilt TV Wall Mount Bracket Low Profile for Most 23-55 Inch LED LCD OLED Plasma Flat Curved Screen TVs, 8 Degrees Tilting for Anti-Glaring, Max VESA 400x400mm and Holds up to 99lbs by Pipishell Image 1
2 / 7

Tilt TV Wall Mount Bracket Low Profile for Most 23-55 Inch LED LCD OLED Plasma Flat Curved Screen TVs, 8 Degrees Tilting for Anti-Glaring, Max VESA 400x400mm and Holds up to 99lbs by Pipishell Image 2
3 / 7

Tilt TV Wall Mount Bracket Low Profile for Most 23-55 Inch LED LCD OLED Plasma Flat Curved Screen TVs, 8 Degrees Tilting for Anti-Glaring, Max VESA 400x400mm and Holds up to 99lbs by Pipishell Image 3
4 / 7

Tilt TV Wall Mount Bracket Low Profile for Most 23-55 Inch LED LCD OLED Plasma Flat Curved Screen TVs, 8 Degrees Tilting for Anti-Glaring, Max VESA 400x400mm and Holds up to 99lbs by Pipishell Image 4
5 / 7

Tilt TV Wall Mount Bracket Low Profile for Most 23-55 Inch LED LCD OLED Plasma Flat Curved Screen TVs, 8 Degrees Tilting for Anti-Glaring, Max VESA 400x400mm and Holds up to 99lbs by Pipishell Image 5
6 / 7

Tilt TV Wall Mount Bracket Low Profile for Most 23-55 Inch LED LCD OLED Plasma Flat Curved Screen TVs, 8 Degrees Tilting for Anti-Glaring, Max VESA 400x400mm and Holds up to 99lbs by Pipishell Image 6
7 / 7

Tilt TV Wall Mount Bracket Low Profile for Most 23-55 Inch LED LCD OLED Plasma Flat Curved Screen TVs, 8 Degrees Tilting for Anti-Glaring, Max VESA 400x400mm and Holds up to 99lbs by Pipishell Image 7
4.6 out of 5 stars

Facts About Tilt TV Wall Mount Bracket Low Profile for Most 23-55 Inch LED LCD OLED Plasma Flat Curved Screen TVs, 8 Degrees Tilting for Anti-Glaring, Max VESA 400x400mm and Holds up to 99lbs by Pipishell

How many watts does this use? Want to use with solar

0 watts. Just like every other TV mount in the world.
I have my TV mount attached to a generator, just in case though.

Do I have to use a drill?

Yes you do

Will a fire stick fit in the back since the tv is close to the house wall? Thanks!

It fits easy in my TV, that will depend on how your TV takes the sticks, Pointing straight backwards maybe a problem, If it is you can get a short extension to help with that

Does it work for a wall with predrilled holes vertical distance of 2.25"from center to center ?

Hi, thanks for your question,
The vertical distance between two holes on the wall plate is about 6”, we are afraid it is not compatible with 2.25” holes.
Best regards, … Hi, thanks for your question,
The vertical distance between two holes on the wall plate is about 6”, we are afraid it is not compatible with 2.25” holes.
Best regards,
Customer Service Team

Does this come with the plate that attaches to the tv itself?

Hi, thanks for your question.
This tv mount do not need the plate attaches to the tv. It is designed with two tv brackets, which can be used to attached to your tv.
If you have any questions, please feel free to contact us at [email protected] … Hi, thanks for your question.
This tv mount do not need the plate attaches to the tv. It is designed with two tv brackets, which can be used to attached to your tv.
If you have any questions, please feel free to contact us at [email protected]
Best regards,
Customer Service Team

Will this work for my lg 55um7300aue?

"Dear Customer,
Thanks for your question.
Yes,this tv mount fits your lg 55um7300aue tv. … "Dear Customer,
Thanks for your question.
Yes,this tv mount fits your lg 55um7300aue tv.

And the following more details could help you choose our products:
First, our tv mount is suitable for these three walls (wood stud, concrete wall, brick wall).
Second, please check your TV weight. Our tv mount is suitable for 26"" to 55"" up to 99lbs / 45kg.
Thirdly,our tv mount is suitable for vesa range from 100mm x 100mm to 400mm to 400mm.
Finally, make sure the inputs on the TV back will not be blocked by the TV mount.
If these parameters are met, this tv wall mount is compatible with your TV.

If you have any other questions, please feel free to contact us at [email protected]
Best regards
Loizy
Customer Service Center"

Does this 40inch tv bracket work for my lg 55um7300pua,vesa300x300mm?

Dear Customer,
Thanks for your question.
… Dear Customer,
Thanks for your question.

Yes. As we checked the model of your lg 55um7300pua TV, the size,VESA and weight of your TV could fit our PIMTK1 tv bracket.
But you need to confirm your wall and make sure the inputs on the TV back will not be blocked by the TV mount. Our tv mount is suitable for these three walls (wood stud, concrete wall, brick wall).

If you have any other questions, please feel free to contact us at [email protected]
Best regards
Customer Service Center

How reliably does this mount stay at 0 degrees vertical without tilting due to the weight of the TV?

Hi, thanks for your question,
This tv mount can tilt 0 to 8 degrees, you can adjust the angle according to your needs.
Best regards, … Hi, thanks for your question,
This tv mount can tilt 0 to 8 degrees, you can adjust the angle according to your needs.
Best regards,
Customer Service Team

I just bought a 50in tv, will this 42 inch tv mount work?

I bought this for my 42 inch tv and it was way too small!! Had to return.

Does it have screws for a 42 inch vizio plasma?

It comes with a assortment of different size screws not sure if it has them for a Vizio specifically cause I used mine to hang a Lg tv

Is the tv always mounted on an angle or can I install it flat up against the wall?

Hi, thanks for your question.
The TV can be flat against the wall, or it can be tilted, the tilt angle is up to 8°, you only need to adjust the tilt screw to find the right angle you want.
If you have any questions, please feel free to contact us at [email protected] … Hi, thanks for your question.
The TV can be flat against the wall, or it can be tilted, the tilt angle is up to 8°, you only need to adjust the tilt screw to find the right angle you want.
If you have any questions, please feel free to contact us at [email protected]
Best regards,
Customer Service Team

Is there a safety certification? By whom?

I don’t remember seeing a safety certification or warrranty. I had someone in construction to mount it for me so I know it was mounted correctly.

Does this tilting tv wall mounts work for my continental edison celed430219b2 ?

Dear customer,

Thanks for your question. Yes, this tilting tv wall mounts will work for your continental edison celed430219b2. This TV mount fits 23-55" TV/monitors and can hold TV weight up to 99lbs. The suitable VESA range of this TV mount is from 100×100mm to 400×400mm. … Dear customer,

Thanks for your question. Yes, this tilting tv wall mounts will work for your continental edison celed430219b2. This TV mount fits 23-55" TV/monitors and can hold TV weight up to 99lbs. The suitable VESA range of this TV mount is from 100×100mm to 400×400mm.

If you have any other questions, please feel free to contact us at [email protected]

Best regards
Lucy
Customer Service Center

My 42" Emerson flat screen has a base on it. How could that fit flat against the wall with one of the hangers?

All bases are removable.

Does this move from side to side?

Only if it is the intent on shifting it over for centering. It will not move on it’s own nor will it shift if nudged.

Info About Tilt TV Wall Mount Bracket Low Profile for Most 23-55 Inch LED LCD OLED Plasma Flat Curved Screen TVs, 8 Degrees Tilting for Anti-Glaring, Max VESA 400x400mm and Holds up to 99lbs by Pipishell (Reviews From Amazon)

Decent mount for the money

I have used expensive high-end mounts and I have used low cost bargain mounts. While these are not the highest quality mount I have used they do the job without worrying about the mount failing and you TV falling off the wall. The mounting plate you bolt to the wall is on the flimsy side but not junk. After mounting into the wood studs my 140lb son always gives it our pull up test by grabbing the top of the mount and hanging with his full weight with no flex or bending of the mounting plate. We mounted a 43 inch TCL smart tv that weights around 25lbs so I am confident that the TV could have been mounted in just the drywall using the supplied plastic wall anchors. The hardware pack that came with it should be sufficient to mount most any modern flat panel TV. I would recommend this mount to anyone looking for a inexpensive mounting solution for a TV.

Nice finishing touch to a 4K UHD TV

The media could not be loaded.  I am using this with a 43″ LG ThinQ UHD 4K TV with a LED bias light attached to the back of the TV https://www.amazon.com/gp/product/B075L3BBL4/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1

Install of the wall mount took less than 20 minutes into 16″ 2×4 wall studs. Everything was included hardware wise including a magnetic bubble level. The instructions were clearly written, easy to understand yet detailed enough to guide most everyone through various install options.

Only tools I needed were a Phillips head screwdriver, socket wrench, drill bit and rotary tool, stud finder and pencil.

I did not expect much for such a economically priced TV wall mount but I am pleasantly surprised and pleased with the quality of the wall mount. I’ll probably pick up a second one for my bedroom TV.

Just what I need

Purchased this to hang up a 32″ Samsung in my child’s room. Was not looking to spend alot and this was perfect for the price. Item itself came and was still sturdy and felt heavy. Sometimes with these cheaper brackets, they will feel/look cheaply made, but that was not the case here. Came with more than enough hardware for whatever scenario you may encounter. In my situation, I was able to screw into a wall stud on one side, but ended up using the anchors for the other side. The tilt option is very easy to use.

Nice touch at a great price.

Pros: Super easy to install. Sturdy material. No visible parts showing ( on my 49″ tv). Friendly on the pocketbook.
Cons: Sits pretty tight to the wall, which gives a nice look but makes it a pain to insert the cables. Fix for that is to install cables before hanging, or undo bottom latch an ease out the tv slightly.
All in all nice product for the price.

Great quality at this price

This is a very well made mount for the size and weight of televisions listed in the item description. The price is very good as well. All hardware is provided for the TV to bracket mounting as well as the base plate to wall attachment given the limitations listed in the instructions.

TV mounts can be easy or extremely frustrating to install. It is mostly not about the manufacturer but the wall conditions.

Because this mount is narrow, it is tricky to catch a pair of wood wall studs (on a stud and sheetrock wall) while also getting your TV in your preferred location. The width of the baseplate only allows mounting it exactly centered on two wood studs (16″ on center, typically). Ideally you would line up the mount in such a way that all four fasteners can go into a wood stud. This is the only stud mounting method mentioned in the instructions and no drywall anchors are provided. Metal studs are not mentioned.

There are instructions and anchors provided for masonry walls as well. The caveat here is that you are told specifically not to drill into the mortar joints as this creates an unsecure mount point for the provided anchors. The issue arises when your masonry wall is covered with sheetrock or plaster and you cannot determine where the mortar joints are.

Not mentioned is what to do when you have a location where you cannot use both wood studs or determine the location of the mortar joints in a masonry wall.

Other manufacturers will recommend using a backer board, provide a much wider base plate or give written recommendations for using a combination of studs and sheetrock anchors. With this model, a backer board (typically 3/4″ plywood spanning at least two studs but not necessarily centered) would likely be a strong option if the backer board is screwed directly into the wood studs. The wall plate would then be mounted to the backer board at the desired location using appropriate lag screws or anchors. The backer board should be sized to be obscured by the TV when mounted and can be sanded and painted to match your wall. If this sounds super complicated and probably aesthetically unpleasant, you are right.

I have used a combination of the provided lag screws into wood studs and zip toggle style wall anchors with success. I also had to use two lags screws and two masonry anchors to mount one of my TVs above my fireplace.

This is not a recommendation, just an idea. When in doubt, buy a larger mount (wider base plate) for more money and better peace of mind.

Great Mount for the Money !

I was amazed to see all of the hardware supplied with this TV mount kit. I used it to mount a 32inch Samsung and it worked just fine. I used one set of screws for a Stud mount and their anchor kit for the other set. My 32inch LED (about 2 years old) is very well mounted. A good value for the price (I made the mistake of paying a lot more for a similar mount). Given the easy install, straight-forward instructions and the variety of hardware, this mount is a good value for the money.

Great Wall mount

We had recently bought our kids 50 inch televisions and needed something (mount) for them. We installed these ourselves and they are really sturdy!!

No Frills Wall Mount

This is an affordable, no frills wall mount. It is exactly what I needed. Other wall mounts can swivel in multiple directions, but you would have to pay a little extra for them. This wall mount is difficult to adjust the tilt up on down once it is in place. So basically you would set it once and it would remain like that indefinitely. I like the low profile of it as the television is extremely close to the wall, just far enough for the plugs. For those who need a bit more room, there are extenders that you can use to bring it further from the wall. This was such an easy, straight forward wall mount to install, feels sturdy, and priced just right.

Easy to install, but with one caveat

This is a good wall mount. It feels very sturdy and strong, and installation is a snap. The only thing I can find wrong with it is that you can’t pre-tilt the mount. Most mounts of this type that I’ve used before allow you to set the angle of the rails that attach to the TV before you hang it on the wall bracket. If you do so with this one, you cannot engage the bottom latching bits of the rails. To get around that, you have to set the rails flat and leave the tilt screws a bit loose, hang and latch it, then pull the TV to the desired tilt angle. Doing that seems to work fine, though. I’m happy with it.

Easy to Install, Sturdy for mid-size TVs

This is about as minimal an engineering solution for a wall mount as you can get. All the parts work together to provide sufficient sturdiness for the rated weight. I mounted a 42″ LG and it’s plenty sturdy. I did make sure the mount was anchored to two wall studs. I would not advise any other was to mount it. Plenty of adjustability to the wall and to the TV to fit pretty much any situation. The included level is a nice touch.

Video Review

Tilt TV Wall Mount Bracket Low Profile for Most 23-55 Inch LED LCD OLED Plasma Flat Curved Screen TVs, 8 Degrees Tilting for Anti-Glaring, Max VESA 400x400mm and Holds up to 99lbs by PipishellTilt TV Wall Mount Bracket Low Profile for Most 23-55 Inch LED LCD OLED Plasma Flat Curved Screen TVs, 8 Degrees Tilting for Anti-Glaring, Max VESA 400x400mm and Holds up to 99lbs by Pipishell 4.6 View On Amazon

Leave A Reply

Please enter your comment!
Please enter your name here