WALI TV Wall Mount Articulating LCD Monitor Full Motion 15 inch Extension Arm Tilt Swivel for Most 13 to 30 inch LED TV Flat Panel Screen with VESA up to 100x100mm (1330LM), Black

Just don’t tighten the nut down all the way, and check it periodically. I rotate my 23" monitor in and out of portrait/landscape mode at least once a day, and abuse the heck out of the arm itself by constantly pulling it in and out of position. I basically only pull out the arm if I need the second monitor, put it ba… Just don’t tighten the nut down all the way, and check it periodically. I rotate my 23" monitor in and out of portrait/landscape mode at least once a day, and abuse the heck out of the arm itself by constantly pulling it in and out of position. I basically only pull out the arm if I need the second monitor, put it back away to clear the space and talk to someone at my desk, pull it back when I go back to work, then rotate it to landscape at night when I want to relax, playing a video game. It gets put back to portrait when I put it away entirely for the night. Once or twice a year I check and tighten anything that’s gotten loose. Seriously a nice mount, keeping in mind that mine is anchored to a solid-wood pine hutch on my desk, rather than sunk into drywall. (And, yes, I realize this question is old, but maybe it’ll help someone.)

4mm / 25.4 = .1574" so a #21(.159") standard drill bit would work.

Good question. From center of vesa plate to center of mounting plate is 2 1/2 in (fully collapsed).

I had mounted it on the side of a kitchen cabinet over our bar and had no problem with it moving in any way. My wife positions it when she is in the kitchen while doing odds and ends and has no problem with it staying in the position she has selected. We love it.

It come with M4x6, M4x12, and M4x30. You can take a look at the user manual on the product detail page, under Product information-Technical Specification. All included hardware kits are living on it.

Yes,it will work with supersonic sc-1311.

There is 180 degrees of play, so it will very likely meet your purpose.

Compatibility: Full motion heavy duty wall mount for most 13 to 30 inches flat panel display up to 33lbs, with VESA 75x75mm to 100x100mm.

They are pretty standard

To use this product, please make sure that your Samsung TV must be flat, smaller than 30", less than 33lbs, and has mounting holes on the back with VESA (mounting hole pattern) 75x75mm(3"x3") or 100x100mm(4"x4")

Sorry for not getting back with you sooner. The 2 arms that go from the wall forward are 11 inches long. The single arm in the middle that goes to the T.V. is approximately 8 inches.

I used a small ratcheting wrench I have, a handy little set I bought at harbor freight.

It comes with the wall anchors

convert to metric. multiply by 25.4 and will tell size…

It came with 2 sets of 4 screws and one set of spacers for mounting the bracket to the tv. The shorter set of 4 screws is used without spacers for most tv’s (where the vesa section of the back of the tv is fairly flat). The longer set of 4 screws is used with the spacers for tv’s which are less flat in that area.
So… It came with 2 sets of 4 screws and one set of spacers for mounting the bracket to the tv. The shorter set of 4 screws is used without spacers for most tv’s (where the vesa section of the back of the tv is fairly flat). The longer set of 4 screws is used with the spacers for tv’s which are less flat in that area.
Some of the bad reviews seem to be caused by people not understanding (quite clear) instructions and selecting the wrong set of 4 screws.

I purchased this mount to use in my R V. I mounted it inside the entertainment cabinet on the side, which allows me to swivel it to the livingroom side on the front or to the bedroom on the back. The mount is very sturdy and does not sag even a little. I did a lot of research before buying this particular mount, and I must say I am very pleased, with the mount and the price. Very excellent product.

My expectations were met. I needed to add (1 screw nut) for every M4x12 bolt-f.
Please review pictures, each bolt did not flush to the back of lcd tv.

I do recommend product.

So, the joints that were stiff (as you can read in other reviews) were so stiff I considered whether I’d need to return this. Instead, I spray PAM on them and wiggled them, and wiped off the excess, and then I found this mount to be PHENOMENAL!

Installed it without any difficulty. I would say that you should consider where you are mounting it, and get your own hardware IF the supplied hardware isn’t appropriate. (That to me is common sense.)

Anyway, I could not be more pleased.

But: the overall distance used by the mount and monitor might be a consideration. From the mount to the center of the monitor is approx. 11 inches. That means if my monitor were wider than 23" the mount itself would interfere with how nicely it folds back. But my monitior is only 17" so I still had another 2.5" from the edge of the monitor to the mount.

The media could not be loaded.  Very odd review but I do lots of DIY things and I had an idea of just buying this and using it to hold my punching bag (about 60 pounds) (regular bag holders are around $80) and I’m very surprised it has not failed me after I’ve been knocking the thing around every morning for almost 2 months! I don’t recommend using it for what I did! But I’m sure it won’t fail your monitor

This is a compact, lightweight, easy-to-install and affordable wall mount for any small to mid sized television. I used this mount to take my 24-inch television (that I use as a second monitor for my computer) off of my desk and free up a ton of real estate that was being taken up by the plastic TV stand/base. The hardware that comes with the mount is sturdy and made for a quick and easy install. All you need is a drill. I will definitely buy these in the future and will look for the next size up for my larger TVs so I can mount them as well.

The mount has a dual swivel bracket system so the screen can easily be angle-adjusted for any situation. The screen can be as close to the wall as I need, or can extend outward to me for art projects where I need to see minute detail up close.

10/10 would buy again.

The lag bolts for the install are a little intense. However, once installed, I’m confident that the product is not coming out of the stud. Personally I would not recommend this product be installed in just drywall. Find a stud. Comes with what looks like drywall anchors, but I’m fairly sure they are intended as concrete anchors. Comes with all the hardware and tools with the exception of a drill for the holes you need to install. No tilt function, but I didn’t expect there to be. I’m typing this viewing on a 31″ curved monitor with the product mounted at full extension. Just enough friction in the pivot points to allow free rotation and it stays in place where I put it. Would recommend within the manufacturers limitations.

Wanted a pull out mount for my Echo 15. Amazon sells mount but not one like I wanted and the ones they do have are ridiculously over priced. Bought this and it worked perfectly! It’s only $12 instead of $50.

I currently have a triple 27 inch curved monitor setup that I use mostly use for cyber security/It Admin work (screen real estate and monitor adjustment is crucial). The right 2 monitors are wall mounted with a different monitor bracket that has works flawlessly, but the monitor all the way to the left was mounted with a different brands wall mount that was absolutely horrible (Not to mention it was over 4 times the price of the double monitor bracket).

I decided to take a gamble and buy this bracket after seeing the great reviews.
The setup of this bracket is extremely straight forward and the box contains everything you need. I recommend taking your time and making sure everything is level, it will save you in the long run.

After finishing the setup and moving it in position I can already say after just a day of use it is 10x better than the previous mount. There are endless ways to easily adjust it – And after adjustment you can tighten all points.

It feels extremely sturdy and after tightening it *Does not move*

I recommend this to anyone that is in the market for a single monitor wall bracket, by the pictures i was skeptical that it would not be able to adjust as needed, but it far exceeded my expectations.

I needed a solution to mount my monitor under some cabinets. I didn’t like anything I found online so I built my own monitor mount and incorporated this mount to make it easy to move my monitor around.

The Good:
1. Price was awesome
2. It was white (visible from the sides, wanted to match the cabinets)
3. It has about 15″ of reach and can tilt and rotate (with some adjustments, see “Bad”
4. The mount is rock solid, well built
5. Came with all the hardware I needed to mount the monitor
6. Really easy to mount the monitor on the arm, did easily by myself without help

The Bad:
1. Really only one, to adjust the tilt and angle, you have to loosen up a nut on the back of the monitor mount. It near impossible to adjust the bolt while the monitor is on the mount. So you have to try you best to position the mount while the monitor is off the mount, put it on and hope for the best. Took 2/3 tries but I got it and now its at the right angle and tilt for my desk.
2. You cannot adjust the height of the monitor, so make sure you measure everything before you mount it.

Overall, if you are looking for a good value in a wall mounted monitor mount, this one fits the bill. If you want more control over height, I recommend a gas mount. Prices have come down and they give you lots of control. I didn’t need that in this scenario, so this mount was perfect.

One thing i do not like is that the last link (where the TV go) is a welded interlock (super tight), not like the other two links, which are lug nuts. You can loosen the lug nuts, but not the welded lock. You can create leverage by using the VESA mount to turn it.

I like the fact that you can adjust the level of the tv later after you drilled the holes in the beam. The bottom hole is an oval

If you use use this with a 24″, you will see the wall anchors when fully extended, the 22″ width of the 24″ tv is not wide enough to conceal the mount’s wall plate. No problem, i cut one of the arm shorter and drilled another 2 holes. It’s perfect now. Pls do this only if you are picky and handy.

Package is complete, everything you would need is included. A level is not included though, nor expected.